• Journal of Technologic Dentistry
• /
• v.16 no.1
• /
• pp.43-56
• /
• 1994

The object of this study is, after the dental technology department is developed into the three-year curriculum and so new curriculum is needed, to compare, analyze, and appreciate the two-year model curriculum that has been practiced in our country, to analyze the curriculum and national quality system practiced in the developed country like U. S. canada, Germany and Japan, and, on the basis of the result from the upper part and inquiry result in the dental technology faculty commity of the nationwide junior college, to establish the new curriculum that is suitable the condition of our dental technology department in the junior college. 1) Since the width of the education is broader after the dental technology department is developed into three-year curriculum from the two-year curriculum, the course of study connected with the dental technology is added. 2) The fundamental course is propounded and the practical course which is needed on the spot is assigned. 3) Since the importance of the practical education is understood time and unit of the experimental practice is extended. 4) The time control in the curriculum commected with the national examination is adjected. 5) On the basis of the actual experience, the actual course is propound and time and unit are added widely to uplift the adjustment of the current environment of the dental technology.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.118-123
• /
• 2001

Most structures of automobile are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic farces for the evaluations of fatigue life and stress concentration exactly. It is rarely obtained the accurate load history of specified positions because of the errors such as modeling, measurement, and etc. In the beginning of design, exact load data are actually necessary for the fatigue strength and life analysis to minimize the cost and time of designing. In this paper, the procedure of practical dynamic load determination is developed by the combination of the principal stresses of F.E. analysis and experiment. Inverse problem and least square pseudo inverse matrix are adopted to obtain an inverse matrix of analyzed stresses matrix. Pseudo-Practical dynamic load was calculated for Lab. Test of sub-structure. GUI program(PLODAS) was developed for whole of above procedure. This proposed method could be extended to any geometric shape of structure.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.487-492
• /
• 2009

A large-scaled research project titled "Intelligent Excavating System (IES)" sponsored by Korean government has launched in 2006. An issue of real-time 3D terrain modeling has become a crucial point for successful implementation of IES due to many application limitations of state-of-the-art techniques developed in various high-technology fields. Many feasible technologies such as laser scanning, structured lighting and so on were widely reviewed by professionals and researchers for one year. Various efforts such as literature reviews, interviews, and indoor experiments make us select a structural light technique and stereo vision technique as appropriate techniques for accomplishment of real-time 3D terrain modeling. It, however, revealed that off-the-shelf products of structural light and stereo-vision technique had many technical problems which should be resolved for practical applications in IES. This study introduces diverse methods modifying off-the-shelf package of the structural light method, one of feasible techniques and eventually allowing this technique to be successfully utilized for achieving fundamental research goals. This study also presents many efforts to resolve practical difficulties of this technique considering basic characteristics of excavating operations and particular environment of construction sites. Findings showed in this study would be beneficial for other researchers to conduct new researches for application of vision techniques to construction fields by provision of detail issues about practical application and diverse practical methods as solutions overcoming these issues.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.332-338
• /
• 2017

The objective of this work was to study the low temperature vacuum adsorption technology applicable to small and medium scale painting plants, which is the main emission source of volatile organic compounds. The low-temperature vacuum swing adsorption (VSA) technology is the way that the adsorbates are removed by reducing pressure at low temperature ($60{\sim}90^{\circ}C$) to compensate disadvantages of the existing thermal swing adsorption (TSA) technology. Commercial activated carbon was used and the absorption and desorption characteristics of toluene, a representative VOCs, were tested on a lab scale. Also based on the lab scale experimental results, a $30m^3min^{-1}$ VSA system was designed and applied to the actual painting factory to assess the applicability of the VSA system in the field. As a result of lab scale experiments, a 2 mm pellet type activated carbon showed higher toluene adsorption capacity than that of using 4 mm pellet type, and was used in a practical scale VSA system. Optimum conditions for desorption experiments were $80{\sim}90^{\circ}C$ and 100 torr. In the practical scale system, the adsorption/desorption cycles were repeated 95 times. As a result, VOCs discharged from the painting factory can be effectively removed upto 98% or more even after repeated adsorption/desorption cycles when using VSA technology indicating potential field applicabilities.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.337-345
• /
• 2009

Deregulation in power industry has made the reactive power ancillary service management a critical task to power system operators from both technical and economic perspectives. Reactive power management in power systems is a complex combinatorial optimization problem involving nonlinear functions with multiple local minima and nonlinear constraints. This paper proposes a practical market-based reactive power ancillary service management scheme to tackle the challenge. In this paper a new model for voltage security and reactive power management is presented. The proposed model minimizes reactive support cost as an economic aspect and insures the voltage security as a technical constraint. For modeling validation study, two optimization algorithm, a genetic algorithm (GA) and particle swarm optimization (PSO) method are used to solve the problem of optimum allocation of reactive power in power systems under open market environment and the results are compared. As a case study, the IEEE-30 bus power system is used. Results show that the algorithm is well competent for optimal allocation of reactive power under practical constraints and price based conditions.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.54-64
• /
• 1997

This paper provides a practical control scheme called three-step input method in order to minimize both robot response time and the resulting residual vibration when the robot manipulator reaches its defined end point. This work is concerned with defining a simple practical method to utilize step inputs to achieve optimum response. The optimum response is achieved by using a self- adjusting input command function that is obtained during a real time processing . The practicality of this control scheme is demonstrated by using an analog computer to simulate a simulate a simple flexible robot and conventional servo controller. The experiments focus on point-to-point movement. Also, this method requires little computational effort through the intelligent use of conventional servo control technology and the robot's vibration characteristics.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.112-115
• /
• 2007

Core list of journals, the ones that best fit the needs of library's primary clientele. The authors outlines a overview of the core journal concept, studies, emphasizing the Sci-Tech field. Several approaches for determining core journal are reviewed and the practical criteria and lists of core journals are explained in the field of Sci-Tech. Theoretical and practical problems associated with the core journal list are discussed.

• Research in Mathematical Education
• /
• v.5 no.1
• /
• pp.25-44
• /
• 2001

The purposes of this paper are to understand the functions of technology TI92 graphing calculator and to develop some typical examples showing that current Korean secondary school mathematics curriculum can be treated with the technology. This study is consisted with five chapters. In Chapter 1, the background and purposes for this study is described. In Chapter 2, the textbooks developed by Core-plus Mathematics Project to reform mathematics education in the United states are analyzed to find the possibilities for practical uses in mathematics classrooms. In Chapter 3, the functions of TI-92 are analyzed with regard to how they can be applied to mathematics education. In Chapter 4, some examples are developed to show that TI-92 can be used for Korean secondary school mathematics education. Chapter 5 is consisted with summaries of this study and some suggestions for further study.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.409-412
• /
• 2007

A lot of research for system-on-panel(SOP) have been done to integrate display systems including data driver, gate driver, timing controller, DC-DC converter, and smart functions such as embedded touch screen, ambient brightness sensing and luminance control, finger printing on the glass. Recently, the cost of an one-chip driver IC with various functions has decreased rapidly, and new mobile display interface technologies have been introduced. So it is necessary to examine the feasibility of SOP for practical mobile applications. In this paper, we will re-examine LTPS technologies for mobile displays in terms of various aspects and discuss the practical limitations on SOP technology and future technology trend of mobile displays.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.149-150
• /
• 2002