• The Korean Journal of Applied Statistics
• /
• v.33 no.1
• /
• pp.11-23
• /
• 2020

Sampling design should provide statistics to meet a given accuracy while saving cost and time. However, a large number of non-responses are occurring due to the deterioration of survey circumstances, which significantly reduces the accuracy of the survey results. Non-responses occur for a variety of reasons. Chung and Shin (2017, 2019) and Min and Shin (2018) found that the accuracy of estimation is improved by removing the bias caused by non-response when the response rate is an exponential or linear function of variable of interests. For that case they assumed that the error of the super population model follows normal distribution. In this study, we proposed a non-response bias adjusted estimator in the case where the error of a super population model follows the gamma distribution or the log-normal distribution in a business survey. We confirmed the superiority of the proposed estimator through simulation studies.

• 전자공학회논문지 IE
• /
• v.47 no.3
• /
• pp.41-46
• /
• 2010

WSN, or Wireless Sensor Network, consists of a multitude of inexpensive micro-sensors. Because the batteries in sensor nodes can not be replaced once they are deployed, the life of a WSN is absolutely determined by the batteries. So, energy efficiency of a network is a critical factor for long-life operation. LEACH protocol which divides WSN into two groups is a typical routing protocol based on the clustering scheme for the efficient use of limited energy. It is composed of round units which are separated into set-up and steady state. In this paper we propose a power saving scheme to minimize set-up phase itself and to involve a data comparison algorithm. We evaluate the performance of the proposed scheme in comparison with original LEACH protocol. Simulation results validate our scheme has better performance in terms of the number of alive nodes as time evolves and average energy dissipated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1337-1344
• /
• 2015

Formation process through charge/discharge operation is needed in manufacturing Li-ion battery. In the process battery is discharged by a load resistor of discharger. Here, energy losses happen. Therefore, in this paper, the efficient energy operation of battery is studied in the charge/discharge system based on DC ${\mu}-Grid$. A result of computer simulation shows that if in the charge/discharge system based on DC ${\mu}-Grid$, the number of discharge batteries in comparison with three charge battery sets exceeds 133%, voltage fluctuation that occurs while the grid voltage stabilizes, which makes the system fatal. Therefore, it was demonstrated that a remarkable energy saving effect could be achieved when the number of discharge battery set is maintained to be 133% in comparison with three charge battery sets.

• Management & Information Systems Review
• /
• v.15
• /
• pp.165-186
• /
• 2004

When certificates of qualification relating to computer have shown up like dam water and meeting the age of office automation (OA) utilizing computer throughout the community, and at the point of time when the promotion of efficiency of duty is attempted by utilizing internet, the improvement plans should be groped for to expect to cultivate the national industrial manpower efficiently and by easily approaching the related OA certificates of qualification related to computer so that everyone can acauire the additional points for recognition of credit, entering company and promotion by the dimension of public trust, recognition degree, practial using level in actual affairs, reliability of problems and after manpower management of the certificates of qualification less expensively and saving time. the concrete plans are as follows: First, in the standard of making questions for the examination of 'Computer Utilizing Ability' executed by the chamber of commerce and Industry, there is the independent examination, but by inserting the presentation portion in the higher grade and middle grade, it should be contributed to improve office efficiency both in mane and reality. Second, though the internet retriever's examination is executed by the nongovernment specialized examination, since it is actually widely utilized in the office activities due to universality of using internet, it is now the time to newly establish and accommodate it as the national examination of 'internet Utilizing Ability', not the interest specialized retriever. Third, the applicants, shall take examination for the nongoverment certificate of qualification or enterprise's certificate of qualification at the date and place designated by the applicant, but there are much restrictions for the national certificate of qualification, so the date of examination shall be decided flexibly and efficiently to give chances to students by adjusting to the semesters of the students. Fourth, in this rapidly changing age of the informationalization community, the acquisition of the certificates of qualification through the university and the designated and entrusted educational institutes should be increased the proportion of activation to become officially recognized, and the extent of special treatment for obtainers of the certificate of qualification should be expanded to equip manpower competitive power in the age of informationalization.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.459-465
• /
• 2007

This study was conducted to calculate the LCC of a apartment complex with a type of heating system, district heating and cogeneration system. For the purpose of analyzing LCC according to size of apartment complex, 500, 1,500 and 4,000 houses of model apartment selected. This research performs design of heating system and the life cycle cost analysis including an initial cost, energy cost, maintenance and operation cost, replacement cost and renovation cost during the project period(15years). According to the calculated results, 1) Initial cost of cogeneration system with 500, 1500 and 4000 houses is higher than district heating system each of 20%, 13%, 12%. 2) In case of cogeneration system, the payback period by electric generation is 5.21, 4.92 and 4.47 years and saving cost was calculated 29 billion won, 94 billion won and 262 billion won after payback period. 3) Cogeneration system LCC was 1.12, 1.07 and 1.06 times larger than district system with the size of apartment complex. According to the case of this study district heating system is more efficient than cogeneration system in terms of the reduction of LCC. 4) Gas Engine Co-generation System is more efficient than other systems because it can collect progressive part from electric charge progressive stage system. However, the efficiency is decreasing because of raising of fuel bills(LNG) and lowering of power rate for house use. Especially the engine is foreign-made so the cost of maintenance and repair is high and the technical expert is short. 5) District heating is also affected by fuel bills so we should improve energy efficiency through recovering of waste heat(incineration heat, etc.). Also, we should supply district cooling on the pattern of heat using of let the temperature high in winter and low in summer.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.10-21
• /
• 2011

Recently, with developments in the automotive industry, sound and vibration damping have a considerable attraction with a diversified customer needs and advanced automobile. In general, among various materials, textile materials, such as felt and glass fibers, polyurethane foam, and PET fiber materials were used to reduce sound and vibration of the automobile. These materials were located in various main parts of the automobile to block sound and vibration, resulting in a comfortable ride. In addition, to improve fuel economy, weight reduction and cost saving for the automobile were also being considered together as well as the reduction of sound and vibration of the automobile. Therefore, in this paper, we focused on the need of interior sound and vibration absorption materials in the automobile and absorption materials-related technologies.

• The Journal of Fisheries Business Administration
• /
• v.36 no.3 s.69
• /
• pp.1-24
• /
• 2005

Korean fishery wage system has been evolved with the different titles. However, Since the law of fishing crew was enacted in 1984, the fishery wage system has been established as a rate system, which is a legal term. The present rate system in practice shows various contents and modalities, depending on fisheries and regions, but the fisheries of large trawl cooperative employ a rate system of fixed plus rate wage. However, such change did not transform basically the properties of pure rate scheme. As well known, fishing vessel owners face an awful lot of difficulty in managing and controlling effectively the production process because fishing activities are carried out in the seas remote from the land. Thus, it tend to be inevitable for vessel owners to employ a rate system to induce fishermen's positive motivation for promoting productivity and saving operating costs. However, the rate system has worked out as a driving force, which induce an increase in production more strongly under the expansion of vessel numbers and power and the keener competition of fishing activities. Even though the control mechanism of fishing instruments are well established, fishermen become naturally to have an incentive to increase their fishing effort for maximizing production since they are able to raise their shares by maximizing the quantity harvested. Thus, as far as the rate system exists, fisheries administration may have much difficulty in realizing its fishery management goals only through vessel reduction and fishing gear regulations. Also, under the rate system fishery management authority may be in face of a serious dilemma between the spontaneous rate system and vessel reduction policy. If the realistic aspect of the rate system is recognized and resource restoration and profit promotion are main policy goals, it is necessary to develop effective ways to control vessel owners' and fishermen's production-maximizing motives at an appropriate level. From this point of view, it seems reasonable to introduce TAC system by species or by fisheries into the existing fishery system. The research results suggest that if the fisheries administration could understand clearly the spontaneous fisheries wage system, it would know the norm of TAC and the basic reasons for illegal fishing activities and thus it would be able to develop and implement more realistic resource management policies.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.68-76
• /
• 2010

Touch-enabled technology is increasingly being accepted as a main communication interface between human and computers. However, conventional touchscreen technologies, such as resistive overlay, capacitive overlay, and SAW(Surface Acoustic Wave), are not cost-effective for large screens. As an alternative to the conventional methods, we introduce a newly emerging method, an optical imaging touchscreen which is much simpler and more cost-effective. Despite its attractive benefits, optical imaging touchscreen has to overcome some problems, such as heavy computational complexity, intermittent ghost points, and over-sensitivity, to be commercially used. Therefore, we designed a hardware controller for signal processing and multi-coordinate computation, and proposed Infrared-blocked DA(Dark Area) manipulation as a solution. While the entire optical touch control took 34ms with a 32-bit microprocessor, the designed hardware controller can manage 2 valid coordinates at 200fps and also reduce energy consumption of infrared diodes from 1.8Wh to 0.0072Wh.

• 전자공학회논문지 IE
• /
• v.47 no.1
• /
• pp.41-47
• /
• 2010

It is very important to prolong the lifetime of wireless sensor networks by using their limited energy efficiently, since it is not possible to change or recharge the battery of sensor nodes after deployment. LEACH protocol is a typical routing protocol based on the clustering scheme for the efficient use of limited energy. It is composed of a few clusters, which consist of head nodes and member nodes. Though LEACH starts from the supposition that all nodes have data transferred to a head, there must be some nodes having useless data in actual state. In this paper we propose a power saving scheme by making a member node dormant if previous sensed data and current data is same. We evaluate the performance of the proposed scheme in comparison with original clustering algorithms. Simulation results validate our scheme has better performance in terms of the number of alive nodes as time evolves.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.56.1-56.1
• /
• 2009

The intermediate operating temperature of solid oxide fuel cells (IT-SOFCs) have achieved considerable importance in the area of power fabrication. This is because to improve materials compatibility, their long-term stability and cost saving potential. However, to conserve rational cell performance at reduced-temperature regime, cathode performance should be obtained without negotiating the internal resistance and the electrode kinetics of the cell. Recently, double perovskite structure cathodes have been studied with great attention as a potential material for IT-SOFCs. In this study, double-perovskite structured cathodes of $GdBaCoCuO_{5+\delta}$, $GdBaCo_{2/3}Cu_{2/3}Fe_{2/3}O_{5+\delta}$ compositions and $(1-x)GdBaCo_2O_{5+\delta}+xCe_{0.9}Gd_{0.1}O_{1.95}$ (x = 10, 20, 30 and 40 wt.%) composites were evaluated as the cathode for intermediate temperature solid oxide fuel cells(IT-SOFCs). Electrical conductivity of the cathodes were measured by DC 4-probe method, and the thermal expansion coefficient of each sample was measured up to $900^{\circ}C$ by a dilatometer study. Area specific resistances(ASR) of the $GdBaCo_{2/3}Cu_{2/3}Fe_{2/3}O_{5+\delta}$ cathode and 70 wt.% $GdBaCo_2O5+\delta$ + 30wt.% Ce0.9Gd0.1O1.95 composite cathode on CGO electrolyte substrate were analyzed using AC 3-probe impedance study. The obtained results demonstrate that double perovskite-based compositions are promising cathode materials for IT-SOFCs.