• 한국멀티미디어학회논문지
• /
• 제17권2호
• /
• pp.124-131
• /
• 2014

본 논문에서는 4-채널 전위계 센서의 배열을 이용한 비접촉 제스처 인식 알고리즘을 제안한다. 주변의 전기장 변화에 민감한 전위계 센서를 스마트기기의 제스처인식에 활용하기 위해서 실내 환경에서 극저주파 대역 EMI(Electro Magnetic Interference) 및 PLN(Power Line Noise) 영향을 최소화하였다. AC 형태의 입력 데이터 값에 10Hz LPF(Low Pass Filter) 및 H/W 샘플링 속도를 고려한 최대 버퍼 값 추출 알고리즘을 적용하여 선형적인 DC 형태의 데이터로 변형한다. 추가적으로 칼만 필터를 적용함으로써 노이즈를 최소화하며, 센서간의 배열을 고려한 데이터 차분 과정을 통해 목표물의 2차원적 움직임 정보를 추출한다. 추출된 데이터 값과 peak 값의 시차정보를 이용하여 DTW(Dynamic Time Warping) 제스처 인식 및 보정 알고리즘을 구현하였으며, 다섯가지 동작 시나리오 테스트 결과 95% 이상의 높은 인식률을 보였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1251-1264
• /
• 2018

The systematic and effective design method of a Class-D current-source resonant inverter for use in an induction cooker with zero-ripple line current is presented. The design procedure is based on the principle of the Class-D current-source resonant inverter with a simplified load network model that is a parallel equivalent circuit. An induction load characterization is obtained from a large-signal excitation test-bench based on parallel load network, which is the key to an accurate design for the induction cooker system. Accordingly, the proposed scheme provides a systematic, precise, and feasible solution than the existing design method based on series-parallel load network under low-signal excitation. Moreover, a zero-ripple condition of utility-line input current is naturally preserved without any extra circuit or control. Meanwhile, a differential-mode input electromagnetic interference (EMI) filter can be eliminated, high power quality in utility-line can be obtained, and a standard-recovery diode of bridge-rectifier can be employed. The step-by-step design procedure explained with design example. The devices stress and power loss analysis of induction cooker with a parallel load network under large-signal excitation are described. A 2,500-W laboratory prototype was developed for $220-V_{rms}/50-Hz$ utility-line to verify the theoretical analysis. An efficiency of the prototype is 96% at full load.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.57-64
• /
• 2013

The functional characteristic of LISN circuit, which is used for measurements of conductive noise in mains power line, is basically related to frequency characteristics of passive elements like inductors used in the circuit as well as the frequency response of inductors is highly related to the resins used in the varnishing process. The significant problem in determination of an inductor's frequency characteristic is the intrinsic resistance, inductance and parasitic capacitance. In this triplet, the parasitic capacitance is the major limiting factor of inductor's frequency range. This capacitance depends on inductor design parameters and materials filling the spaces of coil like resin and its coherency after curing process. In this paper, two similar inductors were designed and built. The first inductor was not varnished while the second one was varnished with VPI technology. VPI, or Vacuum, Pressure, Impregnation technology is one of the most reliable methods performing good insulating conditions for electrical circuits and windings based on resins. The measured results show that implying varnishing technology does not significantly affect the frequency response. However, due to mechanical solidity aspects and improved environmental protection, it is better to varnish the inductors.