• The KIPS Transactions:PartB
• /
• 제12B권6호
• /
• pp.679-684
• /
• 2005

There are a few representative wireless network access technologies used widely. WWAN is celluar based telecommunication networks supporting high mobility, WLAN ensures high data rate within hotspot coverage, and WDMB support both data and broadcasting services correspondingly. However, these technologies include some limitations especially on the mobility, data rate, transmission direction, and so on. In order to overvome these limitations, there are various studies have been proposed in terms of 'Vortical Handoff' that offers seamless connectivity by switching active connection to the appropriate interface which installed in the mobile devices. In this paper, we propose the interface selection algorithm and network architecture to maximize the life time of entire system by minimizing the unnecessary energy consumption of another interfaces such as WLAN, WDMB that are taken in the user equipment. In addition, by using the results of analyzing multiple types of traffic and managing user buffer as a metric for vertical handoff, we show that the energy efficiency of our scheme is $75\%$ and $34\%$ than typical WLAN for WDMB and WLAN preferred schemes, correspondingly.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제49권4호
• /
• pp.45-54
• /
• 2012

Location-based services with GPS positioning technology as a key technology, but recognizing the current location through satellite communication is not possible in an indoor location-aware technology, low-power short-range communication is primarily made of the study. Especially, as Chirp Spread Spectrum(CSS) based location-aware approach for low-power physical layer IEEE802.15.4a is selected as a standard, Ranging distance estimation techniques and data transfer speed enhancements have been more developed. It is known that the distance measured by CSS ranging has quite a lot of noise as well as its bias. However, the noise problem can be adjusted by modeling the non-zero mean noise value by a scaling factor which corresponds to the change of magnitude of a measured distance vector. In this paper, we propose a localization system using the CSS signal to measure distance for a mobile node taken a measurement of the exact coordinates. By applying the extended kalman filter and least mean squares method, the localization system is faster, more stable. Finally, we evaluate the reliability and accuracy of the proposed algorithm's performance by the experiment for the realization of localization system.

• The Korean Fashion and Textile Research Journal
• /
• 제15권6호
• /
• pp.971-976
• /
• 2013

This study provides insight into current social media influences and purchasing power of the young generation in that the size of both of these demographic groups will impact the apparel companies and retail market for the predictable future Denim apparel companies are aware of the discretionary spending power of the Y and Z Generations. The characteristics of current teens are so similar to college-age individuals in that they have grown up with digital technology and they prefer to communicate via social networking sites. Retailers have utilized these social media platforms in order to capture the attention of the generations. Traditionally marketing campaigns have differentiated between teens and the college-age population. However, the teens actually have larger spending power and more discretionary income. A survey consisted of 32 questions pertaining to Internet media influences, influence of people, and decision factors on decisionmaking related to purchasing selection. A random sampling of 163 females responded to a set of questionnaires. Teens, like college students desire to make their own decisions when they select and purchase denim jeans. Overall 40% of them wanted to make their own decisions when purchasing their jeans, however, a significant number are influenced by their friend's opinions (34%) and the opinions of family members (15%). However, celebrities (10%) had the least influence on their decisions. Teens, like colleges students make decisions based on the same decision factors: fit (63%), cost (23%), brand (10%) and color (2%). The most important factor in determining preference was "fit".

• The Journal of the Korea Contents Association
• /
• 제9권8호
• /
• pp.49-56
• /
• 2009

In this paper, we propose a method of energy level, node degree and selection information based CDS(Connected Dominating Set) construction algorithm for more efficient routing in ad-hoc wireless networks. Constructing CDS in ad-hoc wireless network, it is necessary to make more efficient algorithm that is faster, more simple and has low power consumption. A CDS must be minimized because nodes in the CDS consume more energy in order to handle various bypass traffics than nodes outside the set. It is better not to reconstruct CDS after constructing the most efficient CDS. To overcome this problem, we proposed the CDS construction algorithms based on EL+ND+Sel method. We compared and estimated the performance in each situation of EL + ND and EL + ND + Sel.

• Journal of KIISE:Information Networking
• /
• 제35권2호
• /
• pp.158-165
• /
• 2008

In this paper, we present a MMPR (Minimizing the Maximum Used Power Routing) Algorithm in a MANET (Mobile ad hoc network) by modifying the route selection algorithm in well-known routing MANET protocol. In the previous route selection algorithms, the metric for cost function is the minimal hop which does not consider the energy status. MMPR uses the metric with used energy The node that want to know the route for some destination begins calculating the route cost function with alpha which is the maximum used energy in the known route. If the new route that contains the node whose used energy is greater than previous known alpha is known to the node that want to send a packet in some moment, the probability of selecting the new route is lower. Experimental results with MMPR show higher performance in both the maximum used energy and the number of dead nodes than that of the CMMBCR (Conditional Max-Min Battery Routing).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제30권5B호
• /
• pp.274-286
• /
• 2005

In this paper, we propose a new power-efficient and reliable connected dominating set based routing protocol in the mobile ad hoc networks. Gateway nodes must be elected in consideration of residual energy and mobility because frequent reconstruction of connected dominating set result in transmission error for route losses. If node density is high, it results in a lot of contentions and more delays for network congestion. Therefore, in this paper, we propose a new construction method of connected dominating set that supports reliable and efficient data transmission through minimizing reconstruction of connected dominating set by delaying neighbor set advertisement message broadcast in proportion to weighted sum of residual energy, mobility, and the number of neighbor nodes. The performance of the proposed protocol is proved by simulation of various conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제35권9B호
• /
• pp.1381-1389
• /
• 2010

The smart grid technology is expected to significantly improve energy efficiency by dynamic power supply. One of its application is the Vehicle-to-Grid(V2G) that utilizes an electric vehicle's battery as a household storage battery. Meanwhile, a lot of researches are recently investigated in the area of wireless energy transfer technology because of its convenience and safety in charging a battery. With the wireless energy transfer infrastructure a wireless magnetic induction communication technique can help the dynamic power supply of the smart grid more efficient. In this paper, we propose a wireless magnetic induction communication sion cowhich includes data transmission and location-aware functions. We expect the sion cohelp the smart grid to control power supply more efficiently. We also developed its test-bed and evaluated the performance.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제47권1호
• /
• pp.171-184
• /
• 2010

In this work, we develop a novel channel power allocation method for the real-time multimedia over the wireless network environment. Since each frame has different effect on the user perceivable QoS, improving packet loss does not necessarily coincide with perceivable improvements in QoS. A new channel power control scheme is suggested based on the quantified importance of each frame in terms of user perceivable QoS. Dynamic programming formulation is used to obtain optimal transmit power which minimizes power consumption and maximizes user perceivable QoS simultaneously. The experiment is performed by using publicly available video clips. The performance is evaluated using network simulator version 2 (NS 2) and decoding engine is embedded at the client node, and calculated PSNR over the every frame transmitted. Through the semantics aware power allocation (SAPA) scheme, significant improvement on the QoS has been verified, which is the result of unequal protection to more important packets. SAPA scheme reduced the loss of I frame by upto 27% and reduced power consumption by upto 19% without degradation on the user perceivable QoS.

• Journal of Information Processing Systems
• /
• 제2권1호
• /
• pp.39-43
• /
• 2006

In this paper, we proposed TASL-MAC, a medium-access control (MAC) protocol for wireless sensor networks. In wireless sensor networks, sensor nodes are usually deployed in a special environment, are assigned with long-term work, and are supported by a limited battery. As such, reducing the energy consumption becomes the primary concern with regard to wireless sensor networks. At the same time, reducing the latency in multi-hop data transmission is also very important. In the existing research, sensor nodes are expected to be switched to the sleep mode in order to reduce energy consumption. However, the existing proposals tended to assign the sensors with a fixed Sleep/Listening schedule, which causes unnecessary idle listening problems and conspicuous transmission latency due to the diversity of the traffic-load in the network. TASL-MAC is designed to dynamically adjust the duty listening time based on traffic load. This protocol enables the node with a proper data transfer rate to satisfy the application's requirements. Meanwhile, it can lead to much greater power efficiency by prolonging the nodes' sleeping time when the traffic. We evaluate our implementation of TASL-MAC in NS-2. The evaluation result indicates that our proposal could explicitly reduce packet delivery latency, and that it could also significantly prolong the lifetime of the entire network when traffic is low.

• Journal of Korean Academy of Nursing
• /
• 제39권6호
• /
• pp.788-795
• /
• 2009

Purpose: The purpose of this study was to define and clarify the concept of 'resilience' in patients with cardiovascular diseases. Methods: A hybrid model was used to develop the concept of resilience. The model included a field study carried out in Cheonan, Korea. The participants in this study were 9 patients with cardiovascular diseases who underwent a percutaneous coronary intervention. Results: The concept of resilience was found to be a complex phenomenon having meanings in two dimensions: the personal-dispositional and interpersonal dimensions. Four attributes and seven indicators were defined. Conclusion: A resilient person was defined as one who has a positive attitude toward restoration, the power to reconstruct and control his/her disease (personal dimension), and support from a supportive system with supportive persons (interpersonal dimension). In the clinical setting, resilience plays an important role in managing the care plans of cardiovascular patients. Therefore, nurses who work closely with patients suffering from cardiovascular diseases should be aware of the attributes and indicators of resilience to enhance the resilience of their patients.