• 제어로봇시스템학회논문지
• /
• 제11권11호
• /
• pp.936-942
• /
• 2005

Recently the exoskeletal power assistive equipment which is a kind of wearable robot has been widely developed to help the human body motion. For the elderly people and patients, however, some limits exist due to the weight and volume of the equipments. As a feasible solution, a tendon-driven exoskeletal power assistive device fur the lower body, and caster walker are proposed in this research. Since the caster walker carries the heavy items, the weight and volume of the wearable exoskeleton are minimized. The key control is used to generate the joint torque required to assist motions such as sitting, standing and walking. Experiments were performed for several motions and the EMG sensors were used to measure the magnitude of assistance. When the motion of sitting down and standing up was compared with and without wearing the proposed device, the $25\%$ assistance was acquired.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.579-585
• /
• 2010

In this paper, an assistive device for a knee joint to help a disabled person to stand up by supporting power is presented. The device is designed and controlled by using damping characteristics of the MR (Magneto-Rheological) damper. The MR damper helps the person to sit slowly and safely. A DC motor supports muscle power in the case of standing motion. Thus the device helps the disabled person to sit down and stand up. Through the experiments, it is feasible that an assistive device can help the disabled person to standup according to the foot pressure change.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.32.2-32
• /
• 2001

We have developed the power assistive leg called HAL (Hybrid Assistive Leg) which provide the walking aid for walking disorder persons or aged persons without nursing person. We developed HAL-3 by considering some problems of HAL-1,2 which had developed previously. The mechanism of HAL-3 actuator could be simplified and sophisticated by using the harmonic drive. As the control signal of HAL-3 EMG signal was used. We proposed a calibration method to identify parameters which relates the EMG to joint torque by using HAL-3. We could obtain suitable torque estimated by EMG and realize power assist in walking according to the intention of the operator To the remove discomfort for quick motion power assist, the feedforward controller was installed at the beginning of motion ...

• 재활복지공학회논문지
• /
• 제9권1호
• /
• pp.1-9
• /
• 2015

국외의 재활보조기기 추세를 분석하였다. 접어지는 기능이 강화되고, 기존의 동력이 없는 장치에 전동구동 보조모듈이 추가되고, 전반적인 보조기기의 완성도가 향상되고 있다. 특히, 접어지는 기능을 포함한 휴대 및 보관하기 용이한 이동 보조기기가 증가하고 있다. 동력 보조 휠 및 상지보조 모듈이 시장에 진입하고 있다. 상대적으로 성숙된 최신기술을 적용한 신개념의 휠체어가 시장이 나오고 있다. 최신 로봇기술을 응용한 하지 외골격 로봇이 경쟁체제에 돌입하였다. 기립형 휠체어, 경사로, 간단한 계단 이동보조장치가 보편화 되고 있다. 보조기기와 다양한 스마트기기가 결합되고 있다. 이외에도 멋진 디자인, 소재, 가공기술 등에 의한 완성도가 제고 되고 있다.

• 제어로봇시스템학회논문지
• /
• 제21권6호
• /
• pp.538-546
• /
• 2015

This paper describes an intelligent ankle assistive robot which provides assistive power to reduce ankle torque based on an analysis of ankle motion and muscle patterns during walking on level and sloped floors. The developed robot can assist ankle muscle power by driving an electric geared motor at the exact timing through the use of an accelerometer that detects gait phase and period, and a potentiometer to measure floor slope angle. A simple muscle assistive link mechanism is proposed to convert the motor torque into the foot assistive force. In particular, this mechanism doesn't restrain the wearer's ankle joint; hence, there is no danger of injury if the motor malfunctions. During walking, the link mechanism pushes down the top of the foot to assist the ankle torque, and it can also lift the foot by inversely driving the linkage, so this robot is useful for foot drop patients. The developed robot and control algorithm are experimentally verified through walking experiments and EMG (Electromyography) measurements.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.49-50
• /
• 2010

• 재활복지공학회논문지
• /
• 제5권1호
• /
• pp.79-85
• /
• 2011

본 논문은 뇌졸중에 의한 상지 편마비 환자의 재활훈련을 위한 동력보조형 상지재활훈련기의 설계를 제안하였다. 설계된 상지재활훈련기는 3자유도를 가지고 있으며, 검지와 손목은 독립적으로, 그리고 나머지 손가락은 하나의 모듈로 굽힘과 폄 동작이 가능하다. 손목 기구는 복동식 공암실린더를, 손가락 기구에는 두 개의 전동식 선형구동기를 적용하여 동작을 보조하도록 하였다. 설계를 기반으로 프로토타입 상지재활훈련기를 제작하였으며, 0.8mm이내의 오차로 정상상태에 수렴하도록 위치제어기를 구현하였다. 실험의 결과로부터 동력보조용 상지훈련기가 실현가능함을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1307-1308
• /
• 2012

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.46.1-46
• /
• 2001

This paper describes a control method of hybrid power assistive system for lower body, HAL, with the techniques of Phase Sequence and the application of EMG. Our objective is to attain the power assist control of motion in the lower body effectively with these two methods. The Phase Sequence which performs basic motion controls of HAL is the method that a motion, the Task, is accomplished by dividing each motion into the unit named Phase and ...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.43-44
• /
• 2009