• Journal of Institute of Convergence Technology
• /
• v.6 no.2
• /
• pp.35-40
• /
• 2016

Ignitor tip is a component of burner to start the burning process in power plant. This is used to ignite the coal to a constant operating state by fuel mixed with air and kerosene. This component is composed of three components so that air and kerosene are mixed in the proper ratio and injected uniformly. Because the parts with the designed shape are manufactured in the machining process, they have to be made of three parts. These parts are designed to have various functions in each part. The mixing part mixes the supplied air and kerosene through the six holes and sends it to the injecting part at the proper ratio. The inject part injects mixed fuel, which is led to have a constant rotational direction in the connecting part, to the burner. And the connecting plate that the mixed fuel could rotate and spray is assembled so that the flame can be injected uniformly. But this part causes problems that are worn by vibration and rotation because it is mechanically assembled between the mixing part and the inject part. In this study, 3D printing method is used to integrate a connecting plate and an inject part to solve this wear problem. The 3D printing method could make this integrated part because the process is carried out layer by layer using a metal powder material. The part manufactured by 3D printing process should perform the post process such as support removal and surface treatment. However, while performing the 3D printing process, the material properties of the metal powders are changed by the laser sintering process. This change in material properties makes the post process difficult. In consideration of these variables, we have studied the optimization of manufacturing process using 3D printing method.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.1
• /
• pp.37-44
• /
• 2017

Background: The light emitting plasma (LEP) has recently attracted attention as a novel artificial light source for plant growth and functional component enhancement. We investigated the effects of LEP on whitening and antioxidant activities of the plant parts of perilla. Methods and Results: Previously germianted seeds of perilla were cultivated under different light conditions (fluoresce lamp, LED red, blue, white, green, and LEP) in a culture room for 2 months. Parts of perilla were harvested and extracted in 70% EtOH. The extracts were used to detect total phenolic contents, total flavonoid contents, 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS), reducing power and tyrosinase inhibition activity as indicators of biological activity. Biological activity was highest in seedlings grown under LEP. The total phenolic content was highest in the stems and the total flavonoid content was highest in the roots of perilla exposed to LEP. The DPPH and ABTS radical activity in all the parts of perilla exposed to LEP were higher by approximately three-fold compared to that in the control (fluoresce lamp). The reducing power values of perilla significantly increased after treatment with LEP. In addition, all the extract of perilla plants exposed to LEP promoted the tyrosinase inhibitory activity. These results suggest that LEP can be an important artificial light source for enhancement of biological activity. Conclusions: LEP could promote whitening and antioxidant activity of perilla.

• Korean Business Review
• /
• v.22 no.2
• /
• pp.157-179
• /
• 2009

This papers aims to focus on the city marketing as the green growth policy strategies using a case study of Gangneung City, Republic of Korea. In the case study it was verified the fields of urban growth including ecology, culture, alternative and recycled energy, green transportation system. The implications of the study were as follows: First, the city government had regenerated the coastal pine forest through removing unlicensed buildings which were squatted down in decades. Secondly, the city government has recognized the value of culture that possessed various types of cultural asserts. Thirdly, it is possible to use and produce the ocean energy with the tidal power plant, wind power plant and green deep water because Gangneung City has the ocean-oriented image and is located the coastal region. Lastly, the city government has been utilizing the LED traffic light using solar heat and is going to apply the green car like an electric car. This paper indicates the importance of the alternatives of the green growth-oriented policy through city marketing using the concept of culture and ecology. The city government will strive after an advanced triple bottom line with the ecological sustainability, cultural diversity and economic effectiveness in the near future.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.1
• /
• pp.75-103
• /
• 2007

The purpose of this paper is to suggest to tackle the problem of poor cooperation in space activities, by re-examining the nature of the competitive political environment, and by building up a normative overarching framework, One of the most acute problems that hampers regional cooperation is the U.S. influence as represented in the MTCR, a supplier's cartel, as was evidenced in the ill-fate of the 2001 launch contract between China and Korea the next year. Notably China, the third space power in the world, has not been allowed to join the MTCR despite her application in June 2004. A possible reconciliation between China and the MTCR over her application for a partnership would set a cornerstone in building up a cooperative environment in the Northeast Asia. Just as the Helsinki process was an overarching norm building framework, comprising human rights, security and environmental issues, it would be desirable that a future peace framework in Northeast Asia dealing with the pending issues of Korean peninsula should also comprise of such broad issues as one relating to cooperation in space activities in the region. South Korea could tap expertise from her neighbor China. When South Korea become an independent space power either with her own technology or otherwise, she would be in a better position to play a role as a balancer in coordinating between the two neighboring space giants. It is remarkable that the Japanese led APRSAT has contributed much in establishing Sentinel Asia as a part of the Disaster Management Scheme, in that each participant, whether it be a state agency, or a private entity like a university or a research institute, can tap the common data to contribute to the common good of safety.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.117-124
• /
• 2013

Objective: This paper presents additional considerations related to organization and safety culture extracted from recent human error incidents in Korea, such as station blackout(i.e., SBO) in Kori#1. Background: Safety culture has been already highlighted as a major cause of human errors after 1986 Chernobyl accident. After Fukushima accident in Japan, the public acceptance for nuclear energy has taken its toll. Organizational characteristics and culture became elucidated as a major contributor again. Therefore many nuclear countries are re-evaluating their safety culture, and discussing any preparedness and its improvement. On top of that, there was an SBO in 2012 in the Kori#1. Korean public feels frustrated due to the similar human errors causing to a catastrophe like Fukushima accident. Method: This paper reassesses Japan's incidents, and revisits Korea's recent incidents. It focuses on the analysis of the hazards rather than the causes of human errors, the derivation of countermeasures, and their implementation. The preceding incidents and conclusions from Japanese experience are also re-analyzed. The Fukushima accident was an SBO due to the natural disaster such as earthquakes and a successive tsunami. Unlike the Fukushima accident, the Kori#1 incident itself was simple and restored without any loss and radioactive release. However, the fact that the incident was deliberately concealed led to massive distrust. Moreover, the continued violation of rules and organized concealment of the accident are serious signs of a new distorted type of human errors, blatantly revealing the cultural and fundamental weakness of the current organization. Result: We should learn from Japanese experiences who had taken pride in its safety technology and fairly high confidence in safety culture. Japan's first criticality accident in JCO facility splashed cold water on that confidence. It has turned out to be a typical case revealing the problems in the organization and safety culture. Since Japan has failed to gain lessons and countermeasure, the issue persists to the Fukushima incident. Conclusion: Safety culture is not a specific independent element, which makes it difficult to either evaluate it properly or establish countermeasures from the lessons. It may continue to expose similar human errors such as concealment of incident and manipulation of bad data. Application: Not only will this work establish the course of research for organization and safety culture, but this work will also contribute to the revitalization of Korea's nuclear industry from the disappointment after the export contract to UAE.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.29-35
• /
• 2003

The Sn-based lead-free solders with varying microstructure were prepared by changing the cooling rate from the melt. Bulky as-cast SnAg, SnAgCu, and SnCu, alloys were cold rolled and thermally stabilized before the creep tests so that there would be very small amount of microstructural change during creep (TS), and thin specimens were water quenched from the melt (WQ) to simulate microstructures of the as-reflowed solders in flip chips. Cooling rates of the WQ specimens were 140∼150 K/sec, and the resultant $\beta-Sn$ globule size was 5∼10 times smaller than that of the TS specimens. Subsequent creep tests showed that the minimum strain rate of TS specimens was about $10_2$ times higher than that of the WQ specimens. Fractographic analyses showed that creep rupture of the TS-SnAgCu specimens occurred by the nucleation of voids on the $Ag_3Sn$ Sn or $Cu_6Sn_5$ particles in the matrix, their subsequent growth by the power-law creep, and inter-linkage of microcracks to form macrocracks which led to the fast failure. On the other hand, no creep voids were found in the WQ specimens due to the mode III shear rupture coming from the thin specimens geometry.

• Journal of the Economic Geographical Society of Korea
• /
• v.16 no.3
• /
• pp.423-444
• /
• 2013

Tourism in Thoi Son Islet has been the advanced model for rural tourism in the Mekong Delta region since the 1990s. The continuously rising number of tourists, however, has also created problems that affect sustainable rural development. To understand these problems, this research analyzed how rural tourism has been operated through the methodology of a stakeholder network. After investigating the network among key stakeholders (Ho Chi Minh travel agencies (HCMTAs), local travel agencies (LTAs), and local residents, the result showed that in the current model, HCMTAs and LTAs have played the role of connectors, working as hubs to shift tourists (demand) to match local residents (supply), with the networking being dominated by signed contracts (formal networks). The networks between LTAs and local residents are both formal and informal. Inter- and intra-networks among local residents are dominated by informal networks of established working relationships based on networks of family, friends, and neighbors. Moreover, this research has found that there is no cooperating network among LTAs. Among owners of tourist sites was not also found cooperating network. The primary motivating factor for these stakeholders is price competition; this has led to a disproportionately small share of revenue for local stakeholders, with most tourism revenue going to HCMTAs. Additionally, because of the high competition among local stakeholders, this results in local stakeholders having little or no negotiating power when conducting business with HCMTAs. Meanwhile the Tien Giang Tourism Association is inefficient in fostering cooperation among local stakeholders to increase their negotiating power.

• The Korean Journal of Air & Space Law and Policy
• /
• no.spc
• /
• pp.59-86
• /
• 2007

The purpose of this paper is to suggest to tackle the problem of poor cooperation in space activities, by re-examining the nature of the competitive political environment, and by building up a normative overarching framework, One of the most acute problems that hampers regional cooperation is the U.S. influence as represented in the MTCR, a supplier's cartel, as was evidenced in the ill-fate of the 2001 launch contract between China and Korea the next year. Notably China, the third space power in the world, has not been allowed to join the MTCR despite her application in June 2004. A possible reconciliation between China and the MTCR over her application for a partnership would set a cornerstone in building up a cooperative environment in the Northeast Asia. Just as the Helsinki process was an overarching norm building framework, comprising human rights, security and environmental issues, it would be desirable that a future peace framework in Northeast Asia dealing with the pending issues of Korean peninsula should also comprise of such broad issues as one relating to cooperation in space activities in the region. South Korea could tap expertise from her neighbor China. When South Korea become an independent space power either with her own technology or otherwise, she would be in a better position to play a role as a balancer in coordinating between the two neighboring space giants. It is remarkable that the Japanese led APRSAT has contributed much in establishing Sentinel Asia as a part of the Disaster Management Scheme, in that each participant, whether it be a state agency, or a private entity like a university or a research institute, can tap the common data to contribute to the common good of safety.

• Land and Housing Review
• /
• v.9 no.2
• /
• pp.41-50
• /
• 2018

The purpose of this study is to review the U.S. renewable energy policies implemented by the federal government and the state governments to investigate potential barriers of renewable energy expansion and to develop policy implications for the successful renewable energy policy making in Korea. Recently, the restructuring in the energy supply chain has been being a new trend in many countries that shows a transition from traditional fossil fuels to sustainable renewable energy sources. The United States has enforced effective renewable energy policies (i.e., regulatory policies, financial incentives), which have led to the exploding growth of renewable energy facilities and productions over the last ten years. For example, many state governments in the U.S. are implementing Renewable Portfolio Standard (RPS) policies that require increased energy supply from renewable energy sources (i.e., solar, wind and geothermal). These RPS policies are expected to account for at least 10-50 percent of total electricity production in the next fifteen years. As part of results, in the recent three years, renewable energy in the U.S provided over 50 percent of total new power generation constructions. On the other hand, Korea initiated to develop climate change policies in 2008 for the Green Growth Policy that set up a target reduction of national Greenhouse Gas (GHG) emissions up to 37 percent by 2025. However, statistical data for accumulated renewable energy capacity refer that Korea is still in its early stage that contribute to only 7 percent of the total electricity production capacity and of which hydroelectric power occupied most of the production. Thus, new administration in Korea announced a new renewable energy policy (Renewable Energy 3020 Plan) in 2017 that will require over 95 percent of the total new generations as renewable energy facilities to achieve up to 20 percent of the total electricity production from renewable energy sources by 2030. However, to date, there have not been enough studies to figure out the barriers of the current policy environment and to develop implications about renewable energy policies to support the government plan in Korea. Therefore, this study reviewed the U.S. renewable energy policies compared with Korean policies that could show model cases to introduce related policies and to develop improved incentives to rapidly spread out renewable energy facilities in Korea.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.73-79
• /
• 2008

In order to apply for transparent conductive oxide(TCO), we deposited ZnO thin films on the glass at room temperature by RF magnetron sputtering method. Deposition conditions for high transmittance and low resistivity were optimized in our previous studies. Under the deposition condition with the RF power of 200 W, target to substrate distance of 30 mm and working pressure of 5 mTorr, highly conductive($7.4{\times}10^{-3}{\Omega}cm$) and transparent(over 85%) ZnO films were prepared. Highly oriented ZnO film in the [002] direction were obtained with specifically designed ZnO targets. Systematic study on dependence of deposition parameters on electrical and optical properties of the as-grown ZnO films were mainly investigated in this work. And for application tests using these films as transparent conductive oxide anodes, wet chemical etching behaviors of ZnO films were also investigated using various chemicals. Wet-chemical etching behavior of ZnO films were investigated using various acid solutions. The concentrations of these different acid solutions were controlled to study the etching shapes and etching rate. ZnO films were anisotropically etched at various concentrations and wet etching led to crater-like surface structure. Also we firstly found that the etching rate and etching shapes of ZnO films strongly depended on the etchant concentrations (i.e. pH) and the etching rate is exponentially decreased with increasing pH values regardless of the acid etchants.