• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.9
• /
• pp.27-34
• /
• 2018

The purpose of this study is to demonstrate and analyze the function of a Smart Plug before and after it is applied on the electrical appliances by controlling standby power usage. The research measures and analyzes the amount of electrical energy used while activating the Smart Plug with two types of appliances in a university facilities. The smart plugs were applied into a Group 1 appliances (Multi-function device, computer, laptop, Air con) which completely hinder the standby power, and a Group 2 appliances (Refrigerator, cold and hot water dispenser) which does not completely hinder the standby powers due to the characteristics of the function. First, the total standby power saving of all electrical appliances (Group 1 and Group 2) using the Smart plug was measured as 4.59%. Second, the energy saving of the Group 1 products was analyzed as 26.43%. Third, the standby power saving of the air conditioners from mid October to early December was measured as 31.06%, during the seasons when air conditioning was not actively in use. The research indicates that all specified appliances did have better energy efficiency with the Smart plug regardless of the amount of energy usage.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1079-1080
• /
• 2006

This paper presents the methods to save energy by using load consumption pattern analysis. Base on the substation annual power usage data, the characteristic of the substation power consumption have investigated. With this investigation effective electrical billing condition and the control target load has been determined. Most of power usage comes from the motor car, so power system and load table of motor car were reviewed. And in the metropolitan area the peak power consumption occurs at summer or winter rush hours because of its typical characteristics. From this data control point of time are determined. Through the whole study the methode to control the power Peak consumption are proposed and prototype was designed.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.719-722
• /
• 2006

At present, In korea one of big characteristics in electricity power market is unique seller but in the near future competitions are expected in the market. Another big trend is development of IT technology. Through IT, remote inspection for power usage are possible. So huge power consumer like KORAIL it is necessary to investigate power consumption pattern. This paper presents load consumption pattern for representative substation and billing system database program. Base on the substation annual power usage data, the characteristic of the substation power consumption are investigated and effective electrical billing system are compared each other. The database program was properly designed to examine the billings.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.4
• /
• pp.211-220
• /
• 2021

Low-pressure sodium lamps, high-pressure sodium lamps, and fluorescent lamps are mainly used for tunnel lighting in Rep. of Korea, which accounts for the highest percentage in the tunnel maintenance costs. Therefore, tunnel lights are being replaced by LED lamp that have advantages with respect to low power consumption and sustainability. To analyze the effect of replacement high pressure sodium lamp with LED lamp, illumination and monthly power usage per year have been investigated for 10 tunnels. The usage of LED lamp results in illumination improvement from 27.9% to 490% and power saving around average 47.1%.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2145-2157
• /
• 2018

Congestion Management (CM) is an attractive research area in the electrical power transmission with the power compensation abilities. Reconfiguration and the Flexible Alternating Current Transmission Systems (FACTS) devices utilization relieve the congestion in transmission lines. The lack of optimal power (real and reactive) usage with the better transfer capability and minimum cost is still challenging issue in the CM. The prediction of suitable place for the energy resources to control the power flow is the major requirement for power handling scenario. This paper proposes the novel optimization principle to select the best location for the energy resources to achieve the real-reactive power compensation. The parameters estimation and the selection of values with the best fitness through the Symmetrical Distance Travelling Optimization (SDTO) algorithm establishes the proper controlling of optimal power flow in the transmission lines. The modified fitness function formulation based on the bus parameters, index estimation correspond to the optimal reactive power usage enhances the power transfer capability with the minimum cost. The comparative analysis between the proposed method with the existing power management techniques regarding the parameters of power loss, cost value, load power and energy loss confirms the effectiveness of proposed work in the distributed renewable energy systems.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.2
• /
• pp.91-99
• /
• 2015

The electric power consumed by the embedded devices has become a critical issue because the reduction of power consumption is an important factor to prolong the battery-operated devices' lifetime. Many researches and techniques to reduce the power consumption have been proposed and developed but any power method cannot guarantee optimal power consumption of an embedded device - it would be faced with numerous situation - in all ways. Specifically, power researches for embedded devices deployed in the industry field have hardly been done. In this paper, low power service is proposed to minimize power reduction with the several usage status of embedded devices in the industry field. The usage status is basically classified according to the distance between the device and the user which is obtained by the ultrasonic and PIR sensor. The performance evaluation shows that the proposed scheme can reduce the power consumption by up to 45.3% compared to the device with no power reduction scheme. It also shows that the power consumption of the proposed scheme is 5.2% ~ 16.8% lower than that of the timeout scheme.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.3
• /
• pp.629-637
• /
• 2001

The objective of this study was to identify the cultural characteristics affecting advertising contents of the consumer products. Hofstedes(1991) five cultural characteristics such as individualism-collectivism, power distance, masculinity-feminity, avoidance of uncertainty, confucian dynamism were used. Ten kinds of consumer products were included and data were collected from France, Japan, Korea, and U. S. during 1999∼2000. All ads were evaluated and compared their cultural characteristics in terms of country, product involvement and usage, and magazine type. ANOVA, Duncan test, and Pearson correlation-coefficient were applied to analyze data. The results were shown as follows: First, most ads tended to be individual, less power oriented, feministic, and showed high tendency of uncertainty avoidance as well as long term confucianism for all the countries. And some cultural characteristics were different among countries. Japan, France, U. S. and Korea in order showed higher individualism and lower power distance. Also Korea and Japan showed relatively short term confucian culture while U. S. and France did ling term perspectives in the ads. Second, product involvement and usage type had a significant impact on the characteristics of individualism-collectivism and feminity-masculinity. That is, product ads of lower involvement and personal use were likely to show individualistic messages and to have more feministic appeals. Third, magazine type had an impact on some cultural characteristics. Womens magazines would have more individualistic, less power oriented, and feministic appeals of ads. In conclusion, global ads should be localized and differentiated in terms of some cultural characteristics and differ depending on product characteristics.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.895-900
• /
• 2020

In this paper, BSPE replaced the existing multiplication algorithm that consumes a lot of power. Hardware resources are reduced by using a bit-serial multiplier, and variable integer data is used to reduce memory usage. In addition, MOA resource usage and power usage were reduced by applying LOA (Lower-part OR Approximation) to MOA (Multi Operand Adder) used to add partial sums. Therefore, compared to the existing MBS (Multiplication by Barrel Shifter), hardware resource reduction of 44% and power consumption of 42% were reduced. Also, we propose a hardware architecture design for BSPE Core.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2021

In this paper, to expand the use of standalone street lights, an algorithm for controlling LED energy consumption was proposed. The proposed method uses an LED module of a standalone street light divided into n zones. This is a method of reducing total power consumption by preventing the increase in power consumption due to high heat generation by weakly operating the entire LED according to the illuminance. When the amount of sunlight decreases, the whole LED operates weakly and then brightens, and unlike streetlight that act as streetlight, a method of dividing LEDs by area and limiting the number of LEDs operating according to illumination intensity was proposed. This is a way to use a lot of time with limited battery capacity by reducing the generation of heat that consumes the most power in streetlight. It is also a method of continuously changing the initial usage area to improve the total usage time of the LED substrate. As a result of the experiment, it was found that the proposed method extends the service time because it generates less heat than the conventional stand-alone streetlight.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.161-161
• /
• 1996

In this paper the recent studies of digital governor for the Diesel Engine in Korea is summarized and that of usage in the marine and land field as of power plant is analyzed for the interest and development of the enterprise with relation with relation to this industrial part. Our investigation shows that until now the studies on the digitl governor are mainly carried out in KMU and land usage for the power plants is increased gradually because reliance of digital governor is improved and system for the maneuvering and monitoring the plants is computerized.