• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.306-309
• /
• 2019

Wireless charging is a technology of transmitting power through an air gap to an electrical load for the purpose of energy dissemination. Compared to traditional charging with code, wireless power charging has many benefits of avoiding the hassle from connecting cables, rendering the design and fabrication of much smaller devices without the attachment of batteries, providing flexibility for devices, and enhancing energy efficiency, etc. A transmitting coil and a receiving coil for inductive coupling or magnetic resonant coupling methods are available for the near field techniques, but are not for the far field one. In this paper, the wireless power transfer (WPT) circuit by using magnetic resonant coupling method with a resonant frequency of 13.45 Mhz for the low power system is implemented to measure the power transmission efficiency in terms of mutual distance and omnidirectional angles of receiver.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.78-83
• /
• 2019

In this study, we analyze the structure of the transceiver coil in the inductive power transfer (IPT) system. In the IPT system, the transceiver coil design needs to have the highest magnetic coupling possible because of the relatively low magnetic coupling due to the large gap of distance without the core. The transmitting coil may be formed as a multi-layer type according to the distance between the transmitting and receiving coils if the receiving coil is configured as a multi-layer type on the inner structure of the receiving apparatus, thereby improving the magnetic coupling and system efficiency. We compare and analyze the coil magnetic coupling, and system efficiency according to the layer structure of the transmitting and receiving coils and verify the analysis by JMAG simulation. Experimental results show that the layer structure of the transceiver should be considered according to the inner space of the receiving device and the spacing distance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.54-55
• /
• 2011

To transfer the power wirelessly, the inverter converted DC power to a high frequency MHz-grade AC power. And the ECR devices for wirelessly transmitting the power are required. In this paper, the spiral-type ECR device and the high frequency inverter were designed. The operating frequency is approximately 1.2MHz. In addition, using a vector network analyzer, the 1.2MHz operating characteristics of the ECR device for wireless power transfer module are analyzed. It is performed and reviewed on validity of wireless power transfer technologies through experiments.

• Journal of information and communication convergence engineering
• /
• 제17권3호
• /
• pp.221-226
• /
• 2019

In this work, a transmitter/receiver front-end module (T/R FEM) with an automatic Tx/Rx switching scheme for a 2.4 GHz microwave power transfer is developed for a retro-reflective beamforming scheme. Recently, research on wireless power transfer techniques has moved to wireless charging systems for mobile devices. Retro-reflective beamforming is a good candidate for tracking the spatial position of a mobile device to be charged. In Tx mode, the T/R FEM generates a minimum of 1 W. It also comprises an amplitude and phase monitoring port for transmitting RF power. In Rx mode, it passes an Rx pilot signal from a mobile device to a digital baseband subsystem to recognize the position of the mobile device. The insertion loss of the Rx signal path is 4.5 dB. The Tx and Rx modes are automatically switched by detecting the Tx input power. This T/R FEM is a design example of T/R FEMs for wireless charging systems based on a retro-reflective beamforming scheme.

• 중소기업융합학회논문지
• /
• 제6권4호
• /
• pp.25-30
• /
• 2016

본 논문에서는 최근 증가하고 있는 소지품의 분실 방지를 위한 소형 장치의 개발 결과를 제시하고 있다. 제안된 분실 방지 장치 개발을 위해 블루투스4.1 기반의 Slave와 Master로 구성되는 송수신회로로 구성된다. 그리고 저 전력 특성을 구현하기 위해 알고리즘 개발이 병행 되었다. 송수신회로는 블루투스4.1 기능을 지원하는 BoT CLE110 모듈을 사용하였으며, 장치의 제어를 위해 ATmega 328P-AU가 사용되었고 선형 레귤레이터로 LP3874EMP가 사용되었다. 설계된 제품의 소모 전력은 동작 상태에서 35mAh, MCU만 동작 할 경우 10mAh이다. 알람동작거리는 $10m{\pm}30%$, 실효복사전력은 10mW이하, 주파수대역은 블루투스 대역에서 26MHz 이하를 유지하도록 설계되었다. 그리고 Slave와 Master부의 배터리 수명을 연장하기 위한 알고리즘이 개발되었으며, 제품의 크기는 Master($45{\times}45{\times}15mm$), Slave($35{\times}35{\times}10mm$)로 사용자의 편의성을 확보하였다. 본 제품을 최적화 과정을 거쳐 손목시계형 분실 방지 장치로 상용화가 가능할 것으로 기대 된다.

• 센서학회지
• /
• 제14권2호
• /
• pp.78-84
• /
• 2005

A contactless recharging device for totally implantable middle ear systems has been designed as a pillow type that the user can recharge the implanted battery with taking a rest. The proposed device uses the electromagnetic coupling between the transmitting coil and the receiving coil. To supply sufficient power for the implanted circuits, each coil uses LC resonance and the implanted device uses voltage doubler. A power MOSFET is used for switching the DC voltage of LC parallel circuit and the switching frequency demands on a programmable frequency generator which is controlled by microcontroller. In order to improve the electromagnetic coupling efficiency at specific positions of coil which may vary with the displacement of head, the optimal location of receiving coil was studied, and the 5 transmitting coils in a pillow for recharging the implant module was designed. From such a recharging experiment, it was found that the proposed device could provide the sufficient operating voltage within the distance of 4 cm between pillow and the implanted device.

• 디지털융복합연구
• /
• 제17권10호
• /
• pp.243-249
• /
• 2019

본 논문에서는 사용하지 않는 전기제품에서 불필요하게 소비되는 대기전력을 절감하기 위한 장치를 개발하였다. 도플러 센서를 사용하여 사람이 콘센트 주변에 존재 유무에 따라 콘센트의 전원공급과 차단을 자동으로 수행하는 장치이다. 도플러 센서는 동축 케이블 트랩을 사용하여 송신 안테나를 설계하였으며 10GHz 대역의 RF신호를 방사하여 대상 물체로부터 반사된 파장이 변화된 반사파 신호를 수신부로 수신하여 물체를 감지하여 사람의 접근을 인지하도록 하였다. 대기전력을 자동으로 차단 및 복구하여 불필요한 전력소모를 방지하여 에너지를 절약하고 누설전류에 의한 대형 화재의 위험성을 방지할 수 있는 대기전력 자동 차단 및 복구 장치를 개발하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1930-1936
• /
• 2010

Because of the environmental matters the importance of the city railroad is as time goes by increasing. The case of obstacle of the power equipment which supplies electric power to city railroad will occur social and economical enormous loss. Thus, I studied on the preventing method in advance which makes it possible for us to maintain facilities efficiently. The main check points of the power facilities are voltage, current, humidity, partial discharge, move current. These points are gathered by sensor and transmitting to data acquisition device. These data are used to check equipment status in real time. In this paper I described in brief test process and results of the detection system.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 추계산학기술 심포지엄 및 학술대회 발표논문집
• /
• pp.99-103
• /
• 2001

Though the research and the development in the field of machine tool was focused on high precision and high speed machine these days, traditional gear reduction device has been used to increase the cutting force which was transmitted from power source, motor In this study, analysis of 2 step gear reducer used in machining center spindle was carried out by using APM WinMachine which is commercial software for the analysis of machine element and system. For the analysis of this device, first of all, the analysis of power source and the transmitting of it were carried out. Then, machine elements like gear, shaft, bearing, and the forth, was analyzed in the view point of life time, static strength, stiffness, fatigue failure, etc. Consequently, we can estimate them and introduce new idea of the design modification of reduction device by this study.

• 한국전자파학회논문지
• /
• 제22권11호
• /
• pp.1025-1033
• /
• 2011

본 논문은 공동공진기(cavity resonator)와 스트립라인(stripline) 구조를 이용하여 전력을 전송할 수 있도록 구현한 무접점 전력 전송 장치에 관한 것이다. 전력 전송 시 송수신기가 밀착된 상태에서 구현되는 무접점 전력 전송 방식으로, 외부에 도체 단자가 없어 송수신기가 전기적으로 분리되며, 전력 송수신에 필요한 수신부의 크기를 최소화할 수 있다. 공진기용 공동(cavity)의 윗면 도체판에 입력 포트 및 출력 포트용 슬롯(slot)을 구성하고, 그 위에 스트립라인 구조를 이용하여 입력 포트와 출력 포트를 형성한 공동공진기에서, 출력 포트의 일부를 분리하여 탈착 가능하도록 전력수신부를 형성하고, 이 전력수신부를 제외한 나머지 부분 즉, 스트립라인-슬롯 결합(coupling)된 입력 포트, 공동공진기, 출력 포트용 슬롯 등은 모두 전력송신부에 포함시킴으로 전력 전송 장치를 송수신기로 분리하여 제작할 수 있다. 이 송수신기를 결합시키면 마치 하나의 공진기 내에서 입력 포트에서 출력 포트로 전력이 전달되는 형태가 된다. 제작된 무접점 전력 전송 장치의 중심 주파수는 5.782 GHz이며, 이때 측정된 $S_{21}$값은 -1.07 dB로 나타나 약 78 %의 높은 전력 전송율을 갖는 것을 확인하였다.