• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.83-85
• /
• 1999

Recently, a rapid increase of electricity demands have made Transmission & Substation device large-sized. complicated and diverse. Moreover, a rising level of customer's requirement and high growth of industry increase the reliability of electricity service. Therefore on the basis of the case study on the occurrence of fault, the prevention of defects for each device and the analyzing of the outbreak and prevention of systematic breakdown in Sin-Incheon Power Transmission Branch Office, this paper presents some important matters and suggests the method of improvement in design, construction, maintenance, and repairing the Transmission & Substation device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.880-883
• /
• 1998

In this paper, sensitivity based approach to estimate BITC(bilateral interchange transfer capacity) considering the real power flow control function of FACTS device is presented. The real power flow setting of the FACTS device is adjusted so that it transfer the power flow from the first violation point of transmission capacity to other transmission lines in the power system, thus allowing more power to be transferred from the specified generator bus to the specified load bus. The transfer between the two bus locations is increased from this new operating condition until a violation of transmission capacity limits occurs or until the setting of the FACTS device can no longer be adjusted. The proposed algorithm is illustrated using examples of small and real life power system.

• 전력전자학회논문지
• /
• 제5권4호
• /
• pp.377-385
• /
• 2000

본 논문에서는 국내 최초로 설치된 Custom Power기기인 배전용 STATCOM(STATic COMpensator)의 기기 신뢰성 확보를 위힌 기가 테스트 및 설계통 운전 분석결과를 보이고 있다. Custom Power는 유연송전시스템(FACTS : Flexible AC Transmission System)과 같이 교류전력계통을 제어함으로써 효율적이고 유연한 전력계통의 운용과 구성을 목적으로 한다. STATCOM은 Custom Power기기의 한 형태로 무효전력 보상, 전압조정, 그리고 전압 퓰리커 억제 등의 기능을 가진다. 본 논문에서는 STATCOM 시운전 결과 무효전력과 역률 보상에서 우수한 성능을 보임을 확인할 수 있다.

• 한국통신학회논문지
• /
• 제38A권7호
• /
• pp.571-579
• /
• 2013

본 논문은 셀룰러 네트워크에서 D2D (device-to-device) 통신을 고려한 시스템의 에너지 효율적인 모드 선택 기법 (mode selection) 및 파워 할당 기법 (power allocation)을 제안한다. 본 논문에서는 각 단말(device)의 에너지 효율성의 합 측면에서 에너지 효율성 (energy efficiency)을 분석한다. 먼저, 각 단말의 모든 가능한 모드에 대해 에너지 효율을 최대화하는 전송 파워를 계산한다. 제안하는 파워 할당 기법은 시스템 용량 측면에서 최적은 아니지만, 에너지 효율성 측면에서 최적의 성능을 보인다. 제안하는 전송 파워 할당 기법을 기반으로, 모든 가능한 모드에 대해 에너지 효율성을 구한다. 다음 단계로, 모든 가능한 모드 중에서 최대의 에너지 효율성을 갖는 모드를 구하며 동시에 해당 모드의 할당 전송 파워를 도출할 수 있다. 제안 기법은 에너지 효율성 측면에서 최적의 성능을 보이며, 기존 기법에 비해 월등한 성능을 보인다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.1-6
• /
• 2016

Ensuring the secure operation of power systems has become an important and critical matter during the present time, along with the development of large, complex and load-increasing systems. Security constraints such as the thermal limits of transmission lines and bus-voltage limits must be satisfied under all of a system’s operational conditions. An alternative solution to improve the security of a power system is the employment of Flexible Alternating-Current Transmission Systems (FACTS). FACTS devices can reduce the flows of heavily loaded lines, maintain the bus voltages at desired levels, and improve the stability of a power network. The Unified Power Flow Controller (UPFC) is a versatile FACTS device that can independently or simultaneously control the active power, the reactive power and the bus voltage; however, to achieve such functionality, it is very important to determine the optimal location of the UPFC device, with the appropriate parameter setting, in the power system. In this paper, a genetic algorithm (GA) method is applied to determine the optimal location of the UPFC device in a network for the enhancement of the power-system loadability and the minimization of the active power loss in the transmission line. To verify our approach, simulations were performed on the IEEE 14 Bus, 30 Bus, and 57 Bus test systems. The proposed work was implemented in the MATLAB platform.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.117-124
• /
• 2017

스마트 그리드는 기존 전력망에 ICT기술을 접목하여 소비자와 전력 공급자 간 양방향으로 실시간 정보를 교환함으로써 에너지를 효율적으로 사용 할 수 있는 시스템이다. 수요반응(DR, Demand response)은 전기사용자가 전력시장 가격이 높거나 전력계통 위기일 때 절약한 전기를 전력시장에 판매하여 금전으로 보상받는 제도이다. 본 논문은 스마트 미터(Smart Meter)를 사용하여 실시간으로 수요 정보를 계측하고 이를 클라우드 서버로 전송하는 전력량 계측 데이터 전송장치와 전력 IT 시스템을 개발하였다. 본 논문에서 개발된 전력량 계측 데이터 전송장치는 한국전력 데이터와 측정 오차가 없는 신뢰성이 있는 데이터를 제공하기 위해 Raspberry Pi 3에 연결된 빛 센서를 이용하여 한국전력 계측기의 전력량 단위마다 깜박이는 램프의 횟수를 계측한다. 전력량 계측 데이터 전송 장치는 표준 통신 프로토콜인 OpenADR 2.0b를 사용한다. 계측된 데이터는 LTE, WiFi 통신망을 통해 VEN, VTN, 계산 프로그램으로 구성되는 전력 IT 시스템의 MySQL DB에 저장된다. 개발된 전력량 계측 데이터 전송 장치는 전력계통 위기가 발생할 때 급전지시를 내려 피크감축 DR을 실행한다. 개발한 전력량 계측 데이터 전송 장치는 기존 스마트 미터링의 계측시간이 15분으로 고정되는 것과 달리 사용자가 1분 단위로 조절할 수 있는 장점을 갖는다.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.27-38
• /
• 1997

ER clutch is a device using ER fluid, so called "intelligent material" and is a power transmission system controlled with electric field strength. This device responses very rapidly when controlled by rapid and continuous electrical signal and can form a servosystem. Wear, noise and vibration during operation is very low level. This study was undertaken to investigate substitutive possibilities of this ER clutch for existing power transmission mechanism. An analytic relationships using rheological model (so called, 'Bingham plastic model') of ER fluid were developed, and operation constraints and optimum design concepts were constructed. With this relationships, typical responses of ER clutch and effects of changing geometric, kinetic parameters of ER clutch and ER fluid properties were described. In conclusion, compared with existing mechanisms, an excellent performance of ER clutch was confirmed.confirmed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.152-154
• /
• 2006

This paper presents an electric power control scheme in the transmission line using a UPFC(Unified Power Flow Controller). From the practical application viewpoint, the simultaneous realization of the power response desired. The author propose a new power control algorithm for UPFC. To verify the effectiveness of the proposed algorithm, a protype inverter is built and some experiments are carried out.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.245-248
• /
• 2000

This paper presents the test and operation results of the domestic demonstration of the reactive power compensation device called STATCOM (STATic COMpensator). The object of the paper is to describe the reliability of the unit based on the extensive operation databases. By controlling reactive power, the technology offers utilities the opportunity for increased efficiency and their capabilities will permit transmission planners make the best use of their existing transmission resources STATCOM is a custom power device in a way and can be used in a similar way for the dynamic compensation of power transmission systems, mitigation of voltage flicker and improving the power factor. It is shown that the STATCOM has clear advantages in areas such as: mitigation of voltage flicker and improving power factor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.638-641
• /
• 2001

Connectorless power transmission and supply are the power transfer device revealed by resonant inverter or transformer using inductant device. Recently, on power supply have been going on frequently, so several power supply circuit forms are announced. But Compared with the circuit of previous paper, instead of the circuit composed of a simple sylinder Ferrit, I was manufacture in a sylinder that It was a double overlab to a sylinder and I was followed a double flux in inner flux path. Above all, for practicalization, supply circuit operation character analysis and development of controller should be preceded. According to this paper, power transmission and supply analyze characters and design control circuit like the analysis of general resonant inverter for power transmission. They compose the circuit to get sinusoid wave output voltage using pulse width modulation control mode. For Supply, output wave form through power track and power pick-up of magnetic inductance includes ripper component. So I intend to design the controller including filter and regulator, compare analyze theoretical result with real measurement value and then show you their practicality