• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.12
• /
• pp.2233-2239
• /
• 2007

The pantograph-catenary system is one of important components for high-speed rail system that are powered electrically. Electrical power is delivered from a catenary structure to the train via a pantograph and thus it is very important to regulate the contact force between catenary and pantograph. Although a lot of research results for active pantograph have been reported, most of them have made an unrealistic assumption that the catenary displacement is constant with respect to the time. In this paper, we present a new pantograph model that regards the catenary displacement as an unknown disturbance input. Moreover, a disturbance observer based controller is proposed to remove the effect of disturbance, i.e., the catenary displacement variation. The computer simulation result shows that the substantial improvement in regulating the contact force can be achieved by the proposed controller.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1069-1070
• /
• 2008

At the coupling area linking high speed line and conventional line, according to distance between trains due to speed limit of conventional line, the power load of substation supplying to this conventional line increase. At the coupling area between Kimcheon SS and Kyoungsan SS, train operation have problems caused by instantaneous voltage drop. So, this paper propose evaluation method of maximum load capacity at current normal feeding condition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.136-142
• /
• 2009

The vehicle's light-weight technology is divided into optimization of structure geometric and material. Structure geometric optimization and improvement of materials has examined to be power-train and maintenance on the severe condition. The core technology of Special vehicle's light-weight is constitute by Drop box, Axle and Final reduction gear. Technology and product of the parts is high to overseas and import dependency. We will want to examine the possibility of light-weight for the Axle Case and Drop box-connections. In this research, conventional design of excess weight will inhibit the mobility and fuel efficiency. Through the improvement of Axle material, we saw the possibility reducing weight. If you use the results of these studies, it will be available to domestic production technology and reducing weight of RV car, Dump truck, Track crain, etc.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.944-949
• /
• 1998

This paper presents a new high-performance intelligent controlled current-source (CCS) system which can compensate for modelling errors of armature resistance, leakage and magnetizing inductances and for space harmonic components of speed EMF's. A shuttle-motion simulation is presented in the mass-reduced-mode in which an equivalent vehicle weight is reduced, by 40kg to 7kg. This study provides one of the most important key-tech-nologies in driving practical linear synchronous motor (LSM) Maglev vehicle.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.4-6
• /
• 2006

본 연구에서는 열차 추진 장치 시스템에 엔진의 중심부를 모의할 수 있는 Simplorer의 프로그램을 개발하여 M-G Set으로 모사한다. 열차의 엔진부와 발전기 구동에서의 제어는 DTC(Direct Torque Control) 제어로 모사 하였다. M-G Set을 구성은 견인력 토크지령을 받아 엔진부에서 DTC제어를 하였고, 발전기 구동 부는 속도지령을 받는 DTC제어로 하여 추진 장치 성능시험설비 열차운행모의에 의한 전력 조류 해석, 소비 및 회생전력을 분석할 수 있도록 하였다.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.214-230
• /
• 2014

This paper presents a high performance sensor less control four motorized wheels for electric vehicle. Firstly, we applied a sensor less master-slave DTC based control to both the two in wheel motors by using sliding mode observer for its quick response and its high reliability in electric vehicle application. Secondly, to overcome the possible loss of adherence of one of the four wheels which is likely to destabilize the vehicle a solution is proposed in this paper. Thirdly, a Fuzzy logic anti-skid control structure well adapted to the non-linear system is used to overcome the main problem of power train system in the wheel road adhesion characteristic. Various Simulation results have been include in this paper to show that the proposed control strategy can prevent vehicle sliding and show good vehicle stability on a curved path.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.295-296
• /
• 2010

본 논문에서는 고속전철용 추진제어장치의 개발 및 본선 주행시험에 관한 내용을 소개하였다. 고속열차용 추진제어장치는 입력 전류의 고조파를 감소하기 위하여 단상 PWM 컨버터 2대가 병렬로 구성되고 인버터는 3상 인버터 1대로 구성된다. 추진제어장치의 전력회로를 간단히 구성하기 위하여 최대용량(4500V/4200A)의 IGBT 전력소자를 적용하였다. 3상 인버터는 가속시 스위칭 기어현상을 저감하기 위하여 저주파 동기 PWM 기법을 적용하였다. 추진제어장치의 성능을 평가하기 위하여 실제 차량이 운행될 본선에서 속도 300km/h까지 가속시험, 비상제동 시험, 구배기동 시험 등을 실시하였다. 시험을 통하여 제작된 추진제어장치가 성능사양을 만족함을 확인하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.260-263
• /
• 2004

Since Outerrace is one of the components of driving shaft for power train of automobile and transmits high torque, high strength and high toughness are necessary so forging process is adopted to manufacture such parts. Therefore, in order to improve strength and toughness, heat treatment is accomplished after plastic deformation(forging). Because Each component of driving shaft is mounted to automobile after a series of forging, machining and heat treatment, in order to evaluate mechanical properties of such components in use, plastic deformation and heat treatment must be considered. So, in this paper, tensile tests are performed with tensile specimens which have passed through a series of upsetting, machining and heat treatment to evaluate mechanical properties of such components.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.141-144
• /
• 2002

This study presents the enhancement of forgeability of SNCM522H materials. Target parts are output shaft(OP shaft) used as components of power train for automobiles. To carry out cold forging process of OP shaft by 1 pass instead of existing 2 pass process, studies in terms of process design and heat treatment were performed. To introduce the new process, Finite element Method are accomplished, and to verify the validity of proposed heat treatment cycle, several experiments(Hardness test, Observation of optical microstructures, tensile test) are carried out.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.36.2-36.2
• /
• 2011

In variable-speed variable-pitch wind turbines, the conventional approach for controlling power-production operation relies on a generator-torque controller and a rotor-collective blade-pitch controller. Both controllers use the generator speed measurement as the sole feedback input. In order to mitigate unwanted excitation of the control system, many filters are adopted. In this study, the characteristics of some filters for signal processing are investigated based on frequency response function. They include low-pass filters, band-pass filters, and notch filters. Especially, this study focuses on design parameters of their filters.