• KIEE International Transactions on Power Engineering
• /
• v.3A no.1
• /
• pp.7-16
• /
• 2003

A new method to evaluate the protection capability of distribution systems is reported in this paper. This work describes the fuzzy evaluation attributes and aggregation method of evaluation results based on a hierarchical model and the modified combination rule. An evaluation grade index called "protectability" is proposed and is expected to be a very uscful tool in defining an optimal protection and realizing the adaptive protection.rotection.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.11
• /
• pp.604-609
• /
• 2004

This paper suggests a long-term distribution area load forecasting algorithm which offers basic data for distribution planning of power system. To build forecasting model, 4-level hierarchical spatial structure is introduced: System, Region, Area, and Substation. And, each spatial load can be decided proportional to its portion in the higher level. This paper introduces the horizon year loads to improve the forecasting results. And, this paper also introduces an effective load transfer algorithm to improve forecasting stability in case of new or stopped substations. The proposed model is applied to the load forecasting of KEPCO system composed of 16 regions, 85 areas and 761 substations, and the results are compared with those of econometrics model to verify its validity.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.366-368
• /
• 2003

In this paper, a parametric evaluation method of protection ability is proposed. The adequacy of every parameter is evaluated for the setting rules. Then the results are combined to give protection level of a whole protective system. The setting rules are categorized into three groups for hierarchical calculation. The proposed scheme is applied to a location problem of a new protective device to show its effectiveness.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.185-190
• /
• 1995

Conventional alarm system has many difficulties in the operator's identifying the plant status during special situations such as design basis accidents. To solve the shortcomings, an on-line alarm annunciator system, called dynamic alarm console (DAC), was developed. In the DAC, a signal is generated as alarm by the use of an adaptive setpoint check strategy based on operating mode, and time delay technique is used not to generate nuisance alarms. After alarm generation, if activated alarm is a level precursor alarm or a consequencial alarm, it would be suppressed, and the residual alarms go through dynamic prioritization which provide the alarms with pertinent priorities to the current operating mode. Dynamic prioritization is achieved by going through the system- and mode-oriented prioritization. The DAC has the alarm hierarchical structure based on the physical and functional importance of alarms. Therefore the operator can perceive alarm impacts on the safety or performance of the plant with the alarm propagation from equipment level to plant functional level. In order to provide the operator with the most possible cause of the event and quick cognition of the plant status even without recognizing the individual alarms, reactor trip status tree (RTST) was developed. The DAC and the RTST have been simulated with on-line data obtained from the full-scope simulator for several abnormal cases. The results indicated that the system can provide the operator with useful and compact information fur the earlier termination and mitigation of an abnormal state.

• Journal of Korean language education
• /
• v.25 no.1
• /
• pp.83-113
• /
• 2014

This study aims to examine the change of strategy use by analyzing the refusal sequence of beginner Japanese Korean learners by time difference of 10 weeks. The results of the study are as follows; First, in the solidarity system of politeness(power-, distance-), learners showed similar ability as native Koreans after 10 weeks. Second, in the deference system(power-, distance+), there was a difference according to the situational burden when using strategies. In the invitational setting, the learners sought justification for their refusal or tried to negotiate by explaining in detail as time passed. However, in the request setting, they showed no will to compromise by refusing directly and leading the listener to give up. Third, similar difference was found in the use of strategies depending on the situational burden in the hierarchical system(power+, distance+). While learners could present their justification for refusal by showing their interest in the invitation as time passed in the invitation setting, they expressed straight refusal and were not willing to negotiate in the request setting.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.9
• /
• pp.431-439
• /
• 2001

This Paper illustrates a new numerical analysis method using a nodal effective load model for nodal probabilistic production cost simulation of the load point in a composite power system. The new effective load model includes capacities and uncertainties of generators as well as transmission lines. The CMELDC(composite power system effective load duration curve) based on the new effective load model at HLll(Hierarchical Level H) has been developed also. The CMELDC can be obtained from convolution integral processing of the outage capacity probabilistic distribution function of the fictitious generator and the original load duration curve given at the load point. It is expected that the new model for the CMELDC proposed in this study will provide some solutions to many problems based on nodal and decentralized operation and control of an electric power systems under competition environment in future. The CMELDC based on the new model at HLll will extend the application areas of nodal probabilistic production cost simulation, outage cost assessment and reliability evaluation etc. at load points. The characteristics and effectiveness of this new model are illustrated by a case study of MRBTS(Modified Roy Billinton Test System).

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.5
• /
• pp.1-10
• /
• 1998

In this paper, a new hardware-software patitioning algorithm is presented, in which the system behavioral description containing a mixture of hardware and softwae components is partitioned into the hardware part and the software part. In this research, new techniques to optimally partition a mixed system under certain specified constaints such as performance, area, and delay, have been developed. During the partitioning process, the overhead due to the communication between the hardware and software parts are considered. New featues have been added to adjust the hierarchical level of partitioning. Power consumption, memory cost, and the effect of pipelining can also be considered during partitioning. Another new feature is the ability to partition a DSP system under throughput constraints. This feature is important for real time processing. The developed partitioning system can also be used to evaluate various design alternatives and architectures.

• Journal of the Korea Society for Simulation
• /
• v.1 no.1
• /
• pp.87-102
• /
• 1992

This paper presents the development of event-driven system level simulation tool SMPLE(Smpl Extende, an extention fo smpl) and its application to the performance analysis of multiprocessor computer systems. Because of its data structure, it is very difficult to change, expand or add new functions to simulation language smpl implemented by MacDougall. In SMPLE, we change data structure with structure and pointer, add new functions, and enable dynamic memory management. Using new data structure, facilities, and functions added in SMPLE, we simulate job processing of a shared bus multiprocessor system with autonomous hierarchical I/O subsystem. We set system performance contribution of subsystems and units. The impact of disk I/O on system performance is evaluated under vairous conditions of number of processors, processing power, memory access time and disk seek time.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.553-563
• /
• 2016

This paper presents a digital hardware implementation of a real-time simulator for a multiphase drive using a field-programmable gate array (FPGA) device. The simulator was developed with a modular and hierarchical design using very high-speed integrated circuit hardware description language (VHDL). Hence, this simulator is flexible and portable. A state-space representation model suitable for FPGA implementations was proposed for a dual three-phase induction machine (DTPIM). The simulator also models a two-level 12-pulse insulated-gate bipolar transistor (IGBT)-based voltage-source converter (VSC), a pulse-width modulation scheme, and a measurement system. Real-time simulation outputs (stator currents and rotor speed) were validated under steady-state and transient conditions using as reference an experimental test bench based on a DTPIM with 15 kW-rated power. The accuracy of the proposed digital hardware implementation was evaluated according to the simulation and experimental results. Finally, statistical performance parameters were provided to analyze the efficiency of the proposed DTPIM hardware implementation method.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.11
• /
• pp.1401-1409
• /
• 1999

In this paper, a conceptual framework of a new concept of protectability is proposed, which indicates the protection level of the system. Evaluation attributes have been identified and a hierarchical evaluation model has been established. Dempster-Shafer Theory of Evidence is applied in combining multiple uncertain judgements to produce an aggregated evaluation.