• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.258-261
• /
• 2001

High Power factor Active Filter converter is used for Inverter Air conditioner power supply to meet IEC standard. In the active filter topology for power factor, extra switch just control the input current indirectly to meet the IEC standard for reducing the cost and size. In this paper, low cost converter was suggested by simulation using extra switch which auxiliary pulse is inserted and quasi resonant soft switching topology control is adapted for panel's inverter air conditioner converter Inserting auxiliary Pulse method to the extra switch has the benefit of reducing THD by low cost input control circuit. And also quasi resonant soft switching topology can reduce switching loss. So both technical is suitable for Panel's Air conditioner.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2142-2148
• /
• 2009

A microgrid is defined as two or more distributed generation or storage assets configured in a networks and capable of operation in parallel or independently form a larger electric gird, while providing continuous power to one or more end users. And when microgrid are separated from grid oprating protection devices by faults of the grid side, microsources should charge electrical power needs of loads in microgrid and operate maintaining power quality. The magnitude of the switching transients will vary based on voltage phase difference between microgrid and grid, when the microgrid is resynchronized to grid. In this paper, when microgrid is resynchronized to grid, we analyzed the existing problems for reducing switching transients of SS(Static Switch).

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1402-1412
• /
• 2017

This paper presents a new high step-up dc/dc converter for renewable energy systems in which a high voltage gain is provided by using a coupled inductor. The operation of the proposed converter is based on a charging capacitor with a single power switch in its structure. A passive clamp circuit composed of capacitors and diodes is employed in the proposed converter for lowering the voltage stress on the power switch as well as increasing the voltage gain of the converter. Since the voltage stress is low in the provided topology, a switch with a small ON-state resistance can be used. As a result, the losses are decreased and the efficiency is increased. The operating principle and steady-states analyses are discussed in detail. To confirm the viability and accurate performance of the proposed high step-up dc-dc converter, several simulation and experimental results obtained through PSCAD/EMTDC software and a built prototype are provided.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.320-327
• /
• 2016

We propose a multi-channel current-balancing single switch light-emitting diode (LED) driver for a 3D TV. Conventional LED drivers require non-isolated DC/DC converters as many as the number of LED channels, whereas the proposed LED driver needs only one power switch and several balancing capacitors instead of expensive non-isolated DC/DC converters. Therefore, the proposed driver features a simple structure with low cost and high efficiency. In particular, because its power switch can be turned off under the zero-current switching condition, the proposed driver has desirable advantages, such as improved electromagnetic interference characteristics and high efficiency. Moreover, it only uses a small number of DC blocking capacitors with no additional active devices for the current balancing of multi-channel LEDs. Therefore, the proposed driver exhibits high reliability and cost effectiveness. To confirm the validity of the proposed driver, we perform a theoretical analysis and present design considerations and experimental results obtained from a prototype that is applicable to a 46" LED TV.

• 한국전자파학회논문지
• /
• 제19권9호
• /
• pp.992-999
• /
• 2008

본 논문은 $20{\sim}100$ MHz 범위의 VHF 대역에서 $50{\mu}s$ 이내에 2 kW 이상의 고전력 신호를 제어할 수 있는 SPST(Single Pole Single Throw) PIN 다이오드 스위치의 설계 및 제작에 관하여 기술하였다. 고전력 스위치 설계에 필요한 설계 요소를 고찰하였고, 시뮬레이션을 통해 설계된 스위치의 삽입 손실, VSWR 및 격리도 특성이 목표 값을 만족함을 확인하였다. 또한, 실험을 통하여 최대 $20{\mu}s$ 이하의 빠른 스위칭 속도로서 2 kW의 고전력 취급이 가능함을 알 수 있었고, 0.2 dB 이하의 삽입 손실, 1.17:1 이하의 VSWR 및 40 dB 이상의 격리도 특성을 얻었다.

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.55-64
• /
• 2013

In this paper, a new topology which can add a small reactor in series to a condenser-bank type reactive power compensator to limit current is proposed. And also the proposed topology can add or remove a power condenser safely without any addition of inrush-current suppression resistance. The proposed method tests variable resistance of the drain source of a switching device which is controlled by gate voltage in a two-way switch with a diode rectifier and FET switch. In other words, the proposed method is a inrush-current suppression method with the structure of variable resistance. In particular, the proposed method creates smooth current without any resonance in inrush-current as well as is not limited by the time of switch on and off.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.62-69
• /
• 2005

본 논문에서는 보조 스위치의 하드 스위칭 문제를 개선한 AC/DC PFC(Power-Factor-Correction) ZVT(Zero-Voltage-Transition) Boost 컨버터에 관하여 논하였다. 기존의 AC/DC PFC ZVT Boost 컨버터는 주 스위치 턴온 시 보조 스위치를 함께 동작시켜 경부하시에도 강제적으로 영전압 스위칭이 가능하게 함으로써 전 부하범위에서 주 스위치 손실을 저감하였다. 그러나 보조 스위치에서의 손실이 크며 주 스위치의 턴온시 역방향 전류가 증가하는 문제점을 지닌다. 따라서 본 연구에서는 기존의 ZVT 컨버터에 단지 하나의 다이오드를 추가함으로써 보조 스위치의 전류 스트레스 및 주 스위치의 턴온시 역방향 전류를 감소시키게 되어 효율 향상을 기할 수 있었다. 본 논문에서는 MOSFET를 사용하여 640[W]급 시작품을 제작, 100[kHz]에서 실험하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.155-157
• /
• 2009

This paper proposed a soft switching boost converter with an auxiliary circuit, and a modified control method for reduction of switch stress. The proposed converter applies an auxiliary circuit, which is added to the conventional boost converter and used to achieve soft switching for both a main switch and an auxiliary switch. The auxiliary circuit consist of a resonant inductor and two capacitors, an auxiliary switch. The main switch is operated ZVS turn-on, turn-off also auxiliary switch is operated ZCS turn-on, ZVS turn-off. The proposed soft switching boost converter has lower switch loss and higher efficiency than conventional soft switching boost converter.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.99-104
• /
• 2020

In this paper, efficiency and loss characteristics of GaN FET were reported by applying it into the QR flyback converter. In particular, for the comparison of efficiency characteristics, QR flyback converter experimental circuits with Si FET and with GaN FET were separately produced in 12W class. As a result of the experiment, the experimental circuit of the QR flyback converter using GaN FET reached a high efficiency of 90% or more when the load power was 2W or more, and the maximum efficiency was observed to be about 92%, and the maximum loss power was about 1.1W. Meanwhile, the efficiency of the experimental circuit with Si FET increased as the input voltage increased, and the maximum efficiency was observed to be about 82% when the load power was 9W or higher, and the maximum loss power was about 2.8W. From the results, it is estimated that that in the case of the experimental circuit applying the GaN FET switch, the power conversion efficiency was improved as the switching loss and conduction loss due to on-resistance were reduced, and the internal loss due to the synchronous rectifier was minimized. Consequently, it is concluded that the GaN FET is suitable for under 20W class power supply unit as a high efficiency power switch.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.11-22
• /
• 2018

This paper presents a single switch, high step-up, non-isolated dc-dc converter suitable for renewable energy applications. The proposed converter is composed of a coupled inductor, a passive clamp circuit, a switched capacitor and voltage lift circuits. The passive clamp recovers the leakage inductance energy of the coupled inductor and limits the voltage spike on the switch. The configuration of the passive clamp and switched capacitor circuit increases the voltage gain. A wide continuous conduction mode (CCM) operation range, a low turn ratio for the coupled inductor, low voltage stress on the switch, switch turn on under almost zero current switching (ZCS), low voltage stress on the diodes, leakage inductance energy recovery, high efficiency and a high voltage gain without a large duty cycle are the benefits of this converter. The steady state operation of the converter in the continuous conduction mode (CCM) and discontinuous conduction mode (DCM) is discussed and analyzed. A 200W prototype converter with a 28V input and a 380V output voltage is implemented and tested to verify the theoretical analysis.