• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.286-291
• /
• 2000

본 논문에서는 일반적인 EMI 노이즈 개요 및 SMPS(Switching Mode Power Supply)에서의 Noise 발생 메카니즘을 분석하고, 전도성 Noise를 측정하였으며, SMPS에서 발생되는 잡음행태를 분석하여 대책방법을 연구하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권1호
• /
• pp.11-19
• /
• 2007

This paper presents two novel compensation circuits for leakage current and power supply noise (PSN) in phase locked loop (PLL) using a nanometer CMOS technology. The leakage compensation circuit reduces the leakage current of the charge pump circuit which becomes more serious problem due to the thin gate oxide and small threshold voltage in nanometer CMOS technology and the PSN compensation circuit decreases the effect of power supply variation on the output frequency of VCO. The PLL design is based on a 32nm predictive CMOS technology and uses a 0.9V power supply voltage. The simulation results show that the proposed PLL achieves a 88% jitter reduction at 440MHz output frequency compared to the PLL without leakage compensator and its output frequency drift is little to 20% power supply voltage variations. The PLL has an output frequency range of $40M{\sim}725MHz$ with a multiplication range of 11023, and the RMS and peak-to-peak jitter are 5ps and 42.7ps, respectively.

• 한국정보통신학회논문지
• /
• 제18권9호
• /
• pp.2176-2182
• /
• 2014

이 논문에서는 기존의 위상고정루프에 전원 잡음 제거 회로를 추가한 위상고정 루프 회로를 제안한다. 제안한 구조는 주파수 전압 변환기를 변형한 전원 잡음 제거 회로를 사용하여 임의의 전원 잡음에 대해 보상하여 동작한다. 전원 잡음 제거 회로를 사용하여 전원 잡음에 의해 발생하는 지터의 크기를 1/3로 줄였다. 제안한 위상 고정 루프는 0.18um CMOS 공정을 사용 하여 HSPICE 시뮬레이션을 통해 예측되는 결과를 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.75-82
• /
• 1994

The existence of peroodic impulse noises in distribution line carrier (DLC) communication system is known to be the most serious obstacle for improving DLC communication quality in reliability and capacity. From the spectral points, impulse noises can be divided into baseband type and modulation type the noise width of whichs are much different each other. With each nose type, this study presents the basic characteristics in relation to what they originate from and how their spectrum properties are revealed. The baseband type impulse noise is normally caused from thyristor circuit running with low switching speed and the modulation type noise from the circuit of switching power supply. The base wave of modulation noise is shown to be the pulsuatic charging current to primary condenser in switching power circuit. The study result indicates also that placing the DLC carrier frequency away the band predominated by modulated noise especially from RCC type switching power circuit is very important in DLC design.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.41-45
• /
• 2013

Modern electronic devices such as tablets and smartphones are getting more powerful and efficient. The demand in feature sets, functionality and usability increase exponentially and this has posed a great challenge to the design of a power distribution network (PDN). Power rails merging is a popular option used today in a PDN design as numerous power rails are no longer feasible due to form factor limitation and cost constraint. In this paper, the criteria and limitations for power rails merging are discussed. Despite having all the advantages such as pin count reduction, decoupling capacitors sharing, lower impedance and cost saving, power rails merging can however, introduce coupling noise to the system. In view of this, a PDN design with power rails merging that fulfills design recommendations and specifications such as noise target, power well placement, voltage supply values as well as power supply quadrant assignment is extremely important.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1009_1010
• /
• 2009

This paper presents a power supply system with pre-regulator using zero voltage switching (ZVS) interleaving two-transistor forward converter for high input voltage and high power application. A SMPS has a advantage that a good efficiency, small size and light weight but has a noise problem. A linear power supply system has a advantage that a good stability, low ripple and noise but has a disadvantage that a big size, low efficiency and heat problem. To alleviate these problems, we propose an power supply system using dual ZVS interleaving two-transistor forward pre-regulator. The proposed converter is verified on a 1kW, 50kHz experimental prototype.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.69-74
• /
• 2013

In this paper, the impact of integrating large number of I/O (Input-Output) and Core power Delivery Network (PDN) on a 6 layers Flip-Chip Ball Grid Array (FCBGA) package is investigated. The impact of core induced supply noise on high-speed I/O interfaces, and high-speed I/O interface's supply noise coupling to adjacent high-speed I/O interfaces' jitter impact are studied. Concurrent stress validation software is used to induce SSO noise on each individual I/O interfaces; and at the same time; periodic noise is introduced from Core PDN into the I/O PDN domain. In order to have the maximum coupling impact, a prototype package is designed to merge the I/O and Core PDN as one while impact on jitter on each I/O interfaces are investigated. In order to understand the impact of the Core to I/O and I/O to I/O noise, the on-die noise measurements were measured and results were compared with the original PDN where each I/O and Core PDN are standalone and isolated are used as a benchmark.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.326.2-326
• /
• 2002

A PDP(Plasma Display Panel) module consists of a discharge panel, a SMPS for power supply, driving boards for panel control, and a logic board. Driving boards supply high voltage pulses to induce glow dischargein the PDP panel. The electrical pulses excite the circuit elements and subsequentlyacoustic noises. The main sources of the noise in the circuit are the transformer of SMPS and the power MOSFET of driving boards, and the heat sinks often amplify the noise level. (omitted)

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.589-600
• /
• 1999

사무실에서 사용되는 소용량 무정전진원 장치(UPS : Uninterruptible Power Supply)는 대부분의 소음이 냉각팬을 통하여 발생되고 있는데, 이와 같이 장치의 여러 방향으로 방사되는 소음의 능동적 소음제어를 위해서는 FXLMS(Filtered-x LMS) 알고리즘에 기초를 둔 다중채널 방식의 FXLMS(multiple-channel FXLMS) 알고리즘의 사용이 적당하다. 본 논문에서는 사무실에서 주로 사용되는 소용량 UPS의 소음 발생 특성을 분석하고 다중채널 방식 MRMO(Multiple-Reference/Multiple-Output) FXLMS 알고리즘을 적용하여 방사상으로 전파되는 UPS의 소음을 저감시키기 위한 능동 소음 제어를 수행하고 이의 소음저감 특성을 고찰한다.

• 한국인터넷방송통신학회논문지
• /
• 제22권5호
• /
• pp.99-103
• /
• 2022

밀리미터파 추적 레이더는 다양한 환경조건에서 운용하므로 입력전압의 큰 변동에도 안정적인 출력전원을 공급하는 전원공급기가 필요하며, 송수신기에 고품질의 전원공급을 위해 낮은 잡음레벨 특성을 가져야 한다. 본 논문에서는 Ka-대역 추적 레이더에 적용하기 위한 최대 출력 727 W급의 소형 전원공급기 설계 및 구현방안에 대해 기술한다. 전압안정도 및 효율 요구사항을 충족하기 위해 buck 타입의 DC-DC 컨버터의 윗면이 전원공급기의 커버와 맞닿게 배치하여 방열효율을 극대화하였다. 최대 부하 조건에서 시스템 효율 88.4 %, 전압정밀도 ±2 %, 잡음레벨은 전압값의 1 % 이내임을 확인하였다.