• Title/Summary/Keyword: Power sector

Search Result 531, Processing Time 0.027 seconds

Capacity Optimization of a 802.16e OPDMA/TDD Cellular System using the Joint Allocation Algorithm of Sub-charmel and Transmit Power - Part II : Sub-channel Allocation in the Uplink Using the Channel Sounding and Initial Transmit Power Decision Algorithm According to the User's Throughput (802.16e OFDMA/TDD 셀룰러 시스템의 성능 최적화를 위한 부채널과 전송전력 결합 할당 알고리즘 - Part II : 상향링크에서 Channel Sounding을 통한 부채널 할당 및 사용자의 수율에 따른 초기전송전력 결정 알고리즘)

  • Ko, Sang-Jun;Chang, Kyung-Hi;Kim, Jae-Hyeong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.9A
    • /
    • pp.888-897
    • /
    • 2007
  • In this paper, we propose an uplink dynamic resource allocation algorithm to increase sector throughput and fairness among users in 802.16e OFDMA TDD system. In uplink, we address the difference between uplink and downlink channel state information in 802.16e OFDMA TDD system. The simulation results show that not only an increment of 10% of sector throughput but higher level of fairness is achieved by round-robin using the FLR and the rate / margin adaptive inner closed-loop power control algorithm. The FLR algorithm determines the number of sub-channels to be allocated to the user according to the user's position. Also, we get 31.8% more sector throughput compared with the round-robin using FLR by FASA algorithm using uplink channel state information. User selection, sub-channel allocation, power allocation algorithms and simulation methodology are mentioned in Part I.

Radiation Distribution Around Fukushima Daiichi Nuclear Power Station Decade After the Accident

  • Yukihisa Sanada;Miyuki Sasaki;Hiroshi Kurikami;Fumiya Nagao;Satoshi Mikami
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.21 no.1
    • /
    • pp.95-114
    • /
    • 2023
  • During the decades after the Fukushima Daiichi Nuclear Power Station (FDNPS) accident, ambient dose rates have markedly decreased when compared to those at the early state of the accident. Government projects have been continuously conducted by surveying the ambient dose rate and radiocesium distributions. Airborne surveys using crewed helicopters and unmanned aerial vehicles (UAVs) are the best methods for obtaining an overall picture of the distribution. However, ground-based surveys are required for accurate measurements near the population. The differences between these methods include the knowledge of the post depositional behavior of radionuclides in land use. The survey results form the basis for policy decisions such as lifting evacuation zones, decontamination, and other countermeasures. These surveys contain crucial findings regarding post-accident responses. This paper reviews the survey methods of government projects and current situation around the FDNPS. The visualization methods and databases of ambient dose rates are also reviewed to provide information to the population.

Imperfect Competition and Productivity: Korean Fossil-fueled Power Generation Sector (발전부문의 불완전경쟁과 생산성 변화)

  • Kwon, Oh-Sang;Park, Hojeong
    • Environmental and Resource Economics Review
    • /
    • v.19 no.1
    • /
    • pp.3-21
    • /
    • 2010
  • By the significant structural change in 1999, a partial privatization has occurred in Korean fossil-fuel power generation sector. Under the current price scheme wholesale electricity price is dependent on output size, and hence, may not satisfy the assumption of price-taking producers. The purpose of our study is constructing the productivity change measurements of Korean power generation sector taking into account possibly imperfect competition and variable returns to scale. Our approach based on Harrison (1994) and Levinsohn (1993) derives the plant-level productivity measurements of the period between 2001 and 2007, as well as the measurements of mark-ups and returns to scale. It is shown that the mark-up size is dependent on the plants' fuel type and is decreasing over time. Allowing for imperfect competition and variable returns to scale adjusts the productivity measurements substantially.

  • PDF

Analysis of the Influence of Foreign Direct Investment on Carbon Emissions: Analysis Using Panel VAR Model (외국인투자가 탄소배출량에 미치는 영향분석: 패널 VAR 모형을 이용한 분석)

  • Ryoo, Sung-Woo;Lee, Yang-Kee;Kim, Neung-Woo
    • Korea Trade Review
    • /
    • v.44 no.1
    • /
    • pp.45-56
    • /
    • 2019
  • The purpose of this study is to investigate the relationship between foreign investment and carbon emissions in the Korean electricity sector, the causal relationship between the foreign investment invested in the electric power sector in the 16 regional regions and the carbon emissions in the region, The purpose of this study is to analyze the effects of foreign investment on these sectors and the carbon footprint of these sectors using Panel Random Effect Analysis, Panel VAR and OLS models. A panel analysis of foreign investment and regional carbon emissions showed that there was a causal relationship. Based on this analysis, OLS analysis showed that 7 out of 16 metropolitan areas were foreign investment And carbon emissions were significant. In the remaining six regions except Gwangju, there was a causal relationship between foreign investment in the local power sector and the reduction of carbon emissions. After categorizing the electric power industry by device, process, purpose and number of employees, causality also appeared in relation to foreign investment in these sectors and their carbon emissions. Through this study, the authors suggest that foreign investment can be a way to solve not only the financial burden of carbon emission problem, but also the development of national economy and industry through the inflow of capital and advanced new technology.

A Study on Configuration of Small Wind Turbines for Maximum Capacity of Wind Power Systems Interconnected With a Building (빌딩 내 최대 풍력발전설비 연계를 위한 소형풍력발전원 구성에 관한 연구)

  • Lee, Yeo-Jin;Kim, Sung-Yul
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.66 no.4
    • /
    • pp.605-612
    • /
    • 2017
  • One of the biggest environmental issues that our world has been facing is climate change. In order to cope with such environmental issues, the world is putting a great deal of effort into energy conservation. The building sector, in particular, consumes 36% of the energy consumed worldwide and emits considerable amount of greenhouse gases. Therefore, introduction of renewable energies in the building sector is highly recommended. Renewable energy sources that can be utilized in the building sector include sunlight, solar heat, geothermal heat, fuel cells and wind power. The wind power generation system which converts wind energy into electrical energy has advantages in that wind is an unlimited and pollution-free resource. It is suitable to be connected to existing buildings because many years of operational experience and the enhanced stability of the system have made it possible to downsize the electrical generator. In case of existing buildings, it is necessary to consider the live loads of the buildings to connect the wind power generation system. This paper, through the connection of the wind power generation with existing buildings, promotes reduction of greenhouse gas emissions and energy independence by reducing energy consumption in the building sector. In order to connect the wind power generation system with an exciting building, the live load of the building and the area of the rooftop should be considered. The installable model is selected by comparing the live load of the building and the load of the wind power generation system. The maximum number of the wind turbines that can be installed is obtained by considering the separation distance between the wind turbines within the area of the rooftop. Installations are divided into single installations and multiple installations of two different types of wind turbines. After determining the maximum installable number, the optimal model that can achieve the maximum annual power generation will be selected by comparing the respective total annual amount of the power generation of different models.

Benefit Analysis and Profit Business of Fishery Sector about Tidal Power Plant in Garolim Bay (가로림만 조력발전 사업관련 수산부문 수익사업 도출과 편익 분석)

  • Lee, Kwang-Nam;Jung, Jin-Ho
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.27 no.1
    • /
    • pp.218-229
    • /
    • 2015
  • While promoting a variety of projects by using sea space, there has been a lot of social controversy among the stakeholders based on the results of the analysis. In particular, the benefits of fisheries sector were over-estimated and occurred a lot of opposition from fishermen and environment groups. In order to this solve, we have been studied focussed such as excavation of new projects, the method and result of the estimated benefits for fisheries sector. With regard to the tidal power plant of Garolim, we came up with five kinds of problems such as doing not reflect of the cost of the initial investment, over unit production, over unit price, excessive selection of breed, issues of cost of production in benefits study of fisheries sector derived previously. In order to these problems, we have derived new profitable projects based on the initial materials such as improvement of raising breed, discharge project of fingerlings and a small sea ranch project. As a result, previous study was analyzed in 30.2 billion won(1993), 54.8billion won(2009), but this study was estimated to 26.4 billion won and differences of benefits amount were occurred. In a previous study was calculated benefits by simple method, but this study came up with new projects for fisheries sector and because we estimated benefits considering new project. The method for benefits calculations for fisheries sector was not attempted in previous studies and in this study, we approached for the first time Also, in this study suggested new method to increase incomes fishermen such as development of suitable ranch breeding for the marine environment, ranch license(limited license), development of fisheries resources and the operation of fisheries facility. In the future, we hope to be helpful for the same field of study.

Anticorrosive Monitoring and Complex Diagnostics of Corrosion-Technical Condition of Main Oil Pipelines in Russia

  • Kosterina, M.;Artemeva, S.;Komarov, M.;Vjunitsky, I.;Pritula, V.
    • Corrosion Science and Technology
    • /
    • v.7 no.4
    • /
    • pp.208-211
    • /
    • 2008
  • Safety operation of main pipelines is primarily provided by anticorrosive monitoring. Anticorrosive monitoring of oil pipeline transportation objects is based on results of complex corrosion inspections, analysis of basic data including design data, definition of a corrosion residual rate and diagnostic of general equipment's technical condition. All the abovementioned arrangements are regulated by normative documents. For diagnostics of corrosion-technical condition of oil pipeline transportation objects one presently uses different methods such as in-line inspection using devices with ultrasonic, magnetic or another detector, acoustic-emission diagnostics, electrometric survey, general external corrosion diagnostics and cameral processing of obtained data. Results of a complex of diagnostics give a possibility: $\cdot$ to arrange a pipeline's sectors according to a degree of corrosion danger; $\cdot$ to check up true condition of pipeline's metal; $\cdot$ to estimate technical condition and working ability of a system of anticorrosive protection. However such a control of corrosion technical condition of a main pipeline creates the appearance of estimation of a true degree of protection of an object if values of protective potential with resistive component are taken into consideration only. So in addition to corrosive technical diagnostics one must define a true residual corrosion rate taking into account protective action of electrochemical protection and true protection of a pipeline one must at times. Realized anticorrosive monitoring enables to take a reasonable decision about further operation of objects according to objects' residual life, variation of operation parameters, repair and dismantlement of objects.

Free vibration and buckling analyses of functionally graded annular thin sector plate in-plane loads using GDQM

  • Mohammadimehr, Mehdi;Afshari, Hasan;Salemi, M.;Torabi, K.;Mehrabi, Mojtaba
    • Structural Engineering and Mechanics
    • /
    • v.71 no.5
    • /
    • pp.525-544
    • /
    • 2019
  • In the present study, buckling and free vibration analyses of annular thin sector plate made of functionally graded materials (FGMs) resting on visco-elastic Pasternak foundation, subjected to external radial, circumferential and shear in-plane loads is investigated. Material properties are assumed to vary along the thickness according to an power law with Poisson's ratio held constant. First, based on the classical plate theory (CPT), the governing equation of motion is derived using Hamilton's principle and then is solved using the generalized differential quadrature method (GDQM). Numerical results are compared to those available in the literature to validate the convergence and accuracy of the present approach. Finally, the effects of power-law exponent, ratio of radii, thickness of the plate, sector angle, and coefficients of foundation on the fundamental and higher natural frequencies of transverse vibration and critical buckling loads are considered for various boundary conditions. Also, vibration and buckling mode shapes of functionally graded (FG) sector plate have been shown in this research. One of the important obtained results from this work show that ratio of the frequency of FG annular sector plate to the corresponding values of homogeneous plate are independent from boundary conditions and frequency number.

Empirical Analysis on the Industrial Productivity in the Electricity·Gas·Water Service Sector

  • Zhu, Yan Hua;Kang, Joo Hoon;Park, Sehoon
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.20 no.4
    • /
    • pp.25-37
    • /
    • 2015
  • The early studies indicated that the firm with monopoly power is likely to engage in X-inefficiency such as a managerial slack. The reflection of the X-inefficiency theory has led to the issue that the public sector may be more inefficient than the private sector. In Korea like other many countries the electricity gas water service which can be considered as natural monopoly have been provided mostly by the public sector. In order to provide the empirical evidence to the argument that the public sector may be more inefficient than the private sector this paper estimated the four types of Solow residual which is called the total factor productivity in the electricity gas water service industry with the associated empirical model and compared its productivity with one in the manufacturing industry. The empirical results do not support the argument that the public sector may be more inefficient or less productive than the private sector.