• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.98-101
• /
• 2015

최근, 텔레비전을 시청하지 않는 대기 상태에서의 셋톱박스의 대기 전력이 여타 가전기기의 대기 전력보다 10 배 이상을 상회하고 있어, 셋톱박스의 대기전력 저감은 국가적으로도 관심을 받고 있다. 셋톱박스의 대기전력 저감을 위해 대기상태의 셋톱박스의 최소전력 동작 모드인 수동대기모드가 제안되었지만, 셋톱박스가 수동대기모드에서는 셋톱박스의 업데이트 및 제어가 어려우므로, 셋톱박스의 수동대기모드 활용은 어려울 것이다. 본 논문은 수동대기모드에 가까운 대기전력을 소모하면서도 대기상태에서도 셋톱박스의 업데이트를 제공할 수 있는 망연동수동대기 모드를 정의하고, 망연동수동대기모드를 이용한 셋톱박스의 업데이트를 위한 셋톱박스 제어기법을 제안하고, 이 제어 기법을 위한 셋톱박스와 네트워크의 구조, 기능, 시그널링에 대해 설명한다. 본 논문의 망연동수동대기모드와 제어 방안은 셋톱박스 사업자 측면에서 활용성이 높으므로, 낮은 대기전력을 소모하는 셋톱박스 시장을 활성화하여 국가 및 세계적인 전력 감소에 큰 기여를 할 것이다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.46-48
• /
• 2015

본 논문은 외부 전원에 연결되었지만 본래의 용도(예: 셋톱박스인 경우 방송서비스 제공)로 사용되지 않는 대기상태에서도 기존 셋톱박스처럼 업데이트를 수행하면서도 기존의 셋톱박스에 비해 전력소모를 줄일 수 있는, 대기상태의 셋톱박스를 제어하는 방안을 제안한다. 본 논문의 제어방안은 셋톱박스로 전달되는 CPU 활성화 메시지를 이용하거나 메시지의 프로토콜의 일부만 분석하는 방법을 이용하여 셋톱박스 업데이트 필요 유무를 판별하는 방안으로 이는 낮은 CPU(Central Processing Unit) 연산 량만 필요로 하여 셋톱박스 전력소모 저감에 적합하다. 본 논문의 제어방안은 기존의 사업자 측면에서 대기상태 셋톱박스의 업데이트 편의성을 유지시키면서도 국가적 차원의 전력소모 저감에 기여를 할 것이다.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.3
• /
• pp.160-169
• /
• 2013

Two-stage turbocharging is an important way to raise engine power density, to realize energy saving and emission reducing. At present, turbine matching of two-stage turbocharger is based on MAP of turbine. The matching method does not take the effect of turbines' interaction into consideration, assuming that flow at high pressure turbine outlet and low pressure turbine inlet is uniform. Actually, there is swirl flow at outlet of high pressure turbine, and the swirl flow will influence performance of low pressure turbine which influencing performance of engine further. Three-dimension models of turbines with two-stage turbocharger were built in this paper. Based on the turbine models, mechanism of swirl flow at high pressure turbine outlet influencing low pressure turbine performance was studied and a two-stage radial counter-rotation turbine system was raised. Mechanisms of the influence of counter-rotation turbine system acting on low-pressure turbine were studied using simulation method. The research result proved that in condition of small turbine flow rate corresponding to engine low-speed working condition, counter-rotation turbine system can effectively decrease the influence of swirl flow at high pressure turbine outlet imposing on low pressure turbine and increases efficiency of the low-pressure turbine, furthermore increases the low-speed performance of the engine.

• Korea Journal of Hospital Management
• /
• v.7 no.3
• /
• pp.102-120
• /
• 2002

The purpose of study is to understand human-technology integration mechanism by using the study model that takes the core concept and motivation assumptions of technology acceptance model(TAM) into account. This study identifies three motivation mechanisms in adopting or using computer mediated communication(CMC) tool for work. The mechanism comprises with extrinsic, extrinsic motivation, and subjective norm pressure. One hospital with 430 beds and 367 human power was identified and we administered the questionnaire during their work hours. There is 32.4% response rate. The fitting index of the study model surpass the acceptable level, GFI = .980 for none-users, GFI =.986 for users, NNFI = .973 for none-users, and NNFI = .989 for users. In the case of none-users, perceived ease of use determines perceived usefulness that explains behavioral intention to use. As a result, adotpers' usage motivation is based on extrinsic motivation that does not consider their affective factor, attitude, in use of CMC. Users considers their attitudes as the mediating factor of all behavioral beliefs for using CMC continually. Thus, users are likely to depend their adoption behaviors on their affective factor. Moreover, users' behavioral intention is subject to pressures of use from other persons who are important to them, such as supervisor, director, or boss. Achieving human-technology integration in a hospital may cause cost saving and work efficiency. However, the success of information system should base on a profound understanding of employees' adoption behaviors in rejecting, adopting, using, continually using of IT, and organization culture in using IT.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.43-48
• /
• 2020

The purpose of this study is to develop an earth leakage alarm circuit breaker, equipped with a leakage alarming function (JER-E2S, ETECKOREA Co., Korea), and to analyze its characteristics. The developed mechanism is exclusively used for single-phase and 220 V circuits, with a rated current of 32 A, 20 A, 20 A (for restrooms), 16 A, etc. It satisfies all characteristics of existing earth leakage circuit breakers (ELB). If a fire current, which is a resistive leakage current (Igr), flows through an electric line, the device detects the leakage current in real time and warns against the leakage through a blinking LED lamp. Since the developed device displays a tolerance to a capacitative leakage current (Igc) that inevitably occurs in LED lamps, communication devices, etc., it ensures a stable power supply. In addition, the earth leakage alarm circuit breaker protects against power failure due to a momentary ground fault. Therefore, it can supply power without the risk of the circuit breaker malfunctioning due to a momentary ground fault caused by water droplets, leaves, etc. Moreover, with a standby power of less than 0.1 W, the developed earth leakage alarm circuit breaker exhibits a power saving performance that is 3~8 times greater than that of other ELBs. Installation of approximately 10 earth leakage alarm circuit breakers in one apartment household, with an area of 120 ㎡, can save 2~5 kWh per month. Therefore, the developed earth leakage alarm breaker not only satisfies the characteristics of existing earth leakage breakers, but also exhibits outstanding power supply quality since it has the functions of electric fire prevention and malfunction prevention. Therefore, this device can innovatively contribute to electric fire prevention.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.5
• /
• pp.12-23
• /
• 1994

The two-phase flow is observed in power plants, chemical process plants, and refrigeration systems etc., and it is very important to solve the heat transfer mechanism of a boiler, an automic reactor, a condenser and various types of evaporators. Recently, the problem of two phase heat transfer is braught up in many regions with development of energy saving technique. In flow boiling system it is necessary to store data in each condition because the heat transfer characteristics of flow boiling region vary by the change of flow pattern and the magnetude of heat flux to tube length, and be subtly affected by the flow and heating condition. So basic study for knowing flow pattern in heat transfer region and the relation between heat transfer characteristic and flow condition is desired to accumulate data in wide variety of liquid and flow system in the study of heat transfer of two phase flow. In this study R-113 was selected as working fluid whose properties were programmed by least square method, and experiment was conducted in the region of mass flow $1.628{\times}10^6$~$4.884{\times}10^6$/kg/$m^2$hr with inlet subcooling 10~3$0^{\circ}C$, sustaining test section inlet pressure to 1.5kg$_f$/$cm^2$abs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2263-2268
• /
• 2015

This paper describes packet scheduling techniques that can be used to alleviate the impact of interference. The mechanism is consisted of interference estimation and master delay police. Proposed scheduling police is effective in reducing packet loss and delay. Another advantage worth mentioning, are the additional saving s in the transmitter power since packet are not transmitted when channel is bad. This paper gives that scheduling policy works only with data traffic since voice packets need to be sent at fixed intervals. However, if the delay variance is constant and the delay can be limited to a slot, it may be worthwhile to use DM packet for voice.

• The Journal of Fisheries Business Administration
• /
• v.36 no.3 s.69
• /
• pp.1-24
• /
• 2005

Korean fishery wage system has been evolved with the different titles. However, Since the law of fishing crew was enacted in 1984, the fishery wage system has been established as a rate system, which is a legal term. The present rate system in practice shows various contents and modalities, depending on fisheries and regions, but the fisheries of large trawl cooperative employ a rate system of fixed plus rate wage. However, such change did not transform basically the properties of pure rate scheme. As well known, fishing vessel owners face an awful lot of difficulty in managing and controlling effectively the production process because fishing activities are carried out in the seas remote from the land. Thus, it tend to be inevitable for vessel owners to employ a rate system to induce fishermen's positive motivation for promoting productivity and saving operating costs. However, the rate system has worked out as a driving force, which induce an increase in production more strongly under the expansion of vessel numbers and power and the keener competition of fishing activities. Even though the control mechanism of fishing instruments are well established, fishermen become naturally to have an incentive to increase their fishing effort for maximizing production since they are able to raise their shares by maximizing the quantity harvested. Thus, as far as the rate system exists, fisheries administration may have much difficulty in realizing its fishery management goals only through vessel reduction and fishing gear regulations. Also, under the rate system fishery management authority may be in face of a serious dilemma between the spontaneous rate system and vessel reduction policy. If the realistic aspect of the rate system is recognized and resource restoration and profit promotion are main policy goals, it is necessary to develop effective ways to control vessel owners' and fishermen's production-maximizing motives at an appropriate level. From this point of view, it seems reasonable to introduce TAC system by species or by fisheries into the existing fishery system. The research results suggest that if the fisheries administration could understand clearly the spontaneous fisheries wage system, it would know the norm of TAC and the basic reasons for illegal fishing activities and thus it would be able to develop and implement more realistic resource management policies.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.1-13
• /
• 1994

Procedures for the development of a preswirl stator-propulsion system for a VLCC 300K are described in this paper. The preswirl stator-propulsion system is one of the compound propulsor systems, which is used for the purpose of recovering propeller slipstream rotational energy by locating a stator in front of the propeller. The preswirl stator-propulsion system can be considered as a most reliable energy saving device because of its simple mechanism. Five stators are designed for the existing hull form and propeller, and their effects are verified by model tests. Open-water test result of the preswirl stator-propulsion system at the cavitation tunnel show $4{\sim}6%$ increase of open-water efficiency compared to that of a propeller without stators. Maximum 6.5% decrease of delivered power at the design speed(15.5knots) is expected with the designed stator based on the analysis results of resistance and self-propulsion test at the towing tank.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.209-213
• /
• 2019

Recently, demand for high energy density and long cycling stability of energy storage system has increased for application using with frequency regulation (F/R) in power grid. Supercapacitor have long lifetime and high charge and discharge rate, it is very adaptable to apply a frequency regulation in power grid. Supercapacitor can complement batteries to reduce the size and installation of batteries. Because their utilization in a system can potentially eliminate the need for short-term frequent replacement as required by batteries, hence, saving the resources invested in the upkeep of the whole system or extension of lifecycle of batteries in the long run of power grid. However, low energy density in supercapacitor is critical weakness to utilization for huge energy storage system of power grid. So, it is still far from being able to replace batteries and struggle in meeting the demand for a high energy density. But, today, LIC (Lithium Ion Capacitor) considered as an attractive structure to improve energy density much more than EDLC (Electric double layer capacitor) because LIC has high voltage range up to 3.8 V. But, many aspects of the electrochemical performance of LIC still need to be examined closely in order to apply for commercial use. In this study, in order to improve the capacitance of LIC related with energy density, we designed new method of pre-doping in anode electrode. The electrode in cathode were fabricated in dry room which has a relative humidity under 0.1% and constant electrode thickness over $100{\mu}m$ was manufactured for stable mechanical strength and anode doping. To minimize of contact resistance, fabricated electrode was conducted hot compression process from room temperature to $65^{\circ}C$. We designed various pre-doping method for LIC structure and analyzing the doping mechanism issues. Finally, we suggest new pre-doping method to improve the capacitance and electrochemical stability for LIC.