• Journal of Preventive Medicine and Public Health
• /
• 제40권2호
• /
• pp.114-121
• /
• 2007

Power and sample size estimation is one of the crucially important steps in planning a genetic association study to achieve the ultimate goal, identifying candidate genes for disease susceptibility, by designing the study in such a way as to maximize the success possibility and minimize the cost. Here we review the optimal two-stage genotyping designs for genomewide association studies recently investigated by Wang et al(2006). We review two mathematical frameworks most commonly used to compute power in genetic association studies prior to the main study: Monte-Carlo and non-central chi-square estimates. Statistical powers are computed by these two approaches for case-control genotypic tests under one-stage direct association study design. Then we discuss how the linkage-disequilibrium strength affects power and sample size, and how to use empirically-derived distributions of important parameters for power calculations. We provide useful information on publicly available softwares developed to compute power and sample size for various study designs.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.446-448
• /
• 2008

A new plasma display panel sustaining driver using single side sustaining technique with the dual resonant method is proposed. Since this circuit enables to reduce switches in energy recovery circuit with keeping voltage stress like that of prior circuit, it can be low cost circuit comparing with a conventional driver. To integrate sustain function into one side with single power source in the driver, a charge pump method is adopted to make negative sustaining voltage and achieve dual resonant energy recovery on sustaining modes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.36-38
• /
• 2002

Low voltage circuit breakers which interrupt rapidly and raise the reliability of power supply are widly used in power distribution systems. In the paper, it was investigated how much Interrupting capability was improved by correcting the shape of the contact system in molded case circuit breaker(below MCCB), Prior to the interrupting testing, it was necessary for the optimum design to analyze magnetic forces on the contact system, generated by current and flux density. This paper presents both our compuational analysis and test results contact system in MCCB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.859-862
• /
• 1988

This paper discusses one overall reactive power installation pattern that will satisfy system performance constraints for base case. The cost of installation is minimized, Existing controllers are fully utilized prior to any addition of new installation. Installation pattern for the required new shunt compensation is comprised of discrete, standard size components.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1522-1528
• /
• 2007

Electric Power cable is the apparatus that receives electric power from the Korea Electric Power Corporation and supplies electric power to electric train and annex facilities of each railway station. With substantial ripple effect during power blackout accidents, such power blackout accidents must be coped with by discriminating the status of insulation deterioration of electric power cable in advance. Discrimination of insulation deterioration of the electric power cable is normally executed while the power is disconnected and it is very difficult to discover, at early stage, the insulation deterioration of the power cable in operational state since the duration of inspection is limited. This research aims to consider method of diagnosing the insulation deterioration of electric power cable in On-Line state rather than diagnosis in Off-Line state in order to secure reliability of power supply by reducing duration of power blackout (accidental blackout and blackout during works) and by seeking reduction in equipment and manpower used in diagnosis of deterioration through prevention of the accident itself prior to occurrence through early restoration of accident due to insulation deterioration of the electric power cable and assessment of performance of the cable under operation.

• 정보과학회 논문지
• /
• 제43권1호
• /
• pp.126-134
• /
• 2016

OLED 디스플레이는 빠른 응답속도, 전력 효율성 등 여러 장점 때문에 점차 사용이 증가하고 있는 추세이다. 뛰어난 전력 효율성에도 불구하고 메신저, 게임 등의 사용자와의 상호작용 기반의 어플리케이션 사용의 증가로 OLED에 의한 전력 소모 비중이 여전히 크게 나타나고 있다. OLED에서는 출력하는 영상에 따라 소모 전력이 크게 달라지기 때문에 저전력 색 변환 기법이 대표적인 전력 절감 기법이다. 기존의 저전력 색 변환 기법들은 색 변환 시 인간 시각 시스템의 만족에 대한 엄밀한 연구가 없으며, 시각 만족도와 소모 전력을 동시에 최적으로 고려하는 연구가 부재했다. 본 연구에서는 기존 기법들의 문제점을 보완한 새로운 저전력 색변환 기법을 제안한다. 실험 결과를 통해서 제안 기법이 기존 기법보다 시각 만족도 측면에서 더 인간 시각 시스템을 만족하며 또 전력절감 측면에서도 색 변환거리에 따라 기존 기법보다 평균 13.4% 및 22.4% 향상된 전력 절감이 가능한 것으로 나타났다.

• 전력전자학회논문지
• /
• 제9권5호
• /
• pp.438-447
• /
• 2004

본 논문에서는 하프ㆍ풀-브리지 셀을 이용하는 새로운 멀티레벨 인버터를 제안하고 독립형 태양광 인버터로서의 가능성을 평가한다. 기본 회로 구조는 기존의 11-레벨형 PWM 인버터에 기초하며 세 개의 풀-브리지 모듈 중 하나의 모듈을 하프-브리지 구조로 대체한다. 이 간단한 회로 구조의 변경으로 제안된 멀티레벨 인버터는 세 가지의 장점을 가지게 된다. 첫째, 출력 전압 레벨 수의 증가를 통해 보다 정현적인 출력 전압 파형을 형성 시킬 수 있다. 둘째, 풀-브리지 모듈 대신 하프-브리지 셀을 이용하므로 두 개의 전력 스위치를 줄일 수 있다. 셋째, 쵸핑용으로 이용되는 인버터와 결합된 변압기에 의해 부하로 전달되는 전력량을 저감 시킬 수 있어 전체 효율 개선에 유리하다. 즉, 대부분의 전력은 저주파 스위칭 동작으로 기본 출력전압을 형성하는 인버터와 이와 결합된 변압기에 의해 부하단으로 전달되고, 고주파 스위칭을 하는 쵸핑용 인버터와 이와 결합된 변압기를 통한 출력은 최종 출력전압을 보다 정현화 하기 위한 목적으로 사용되도록 한다. 기존의 11-레벨형 PWM 인버터와 비교를 통해 제안하는 인버터를 평가하고, 컴퓨터 시뮬레이션 및 실험 결과를 통해 독립형 태양광 인버터로서의 가능성을 입증한다.

• Journal of Electrical Engineering and Technology
• /
• 제2권4호
• /
• pp.452-460
• /
• 2007

The interstate electric power system, as an alternative for energy cooperation under regional economic block, was fervently debated prior to the restructuring of electric power industries and rapidly expanded in many regions since the 1990s. Especially, electric power system interconnection in the Northeast Asia region may bring considerable economic benefits since this region has strong supplementation in resource holdings, load shape, fuel mix, and etc. In this paper, we implement the ORIRES model, proposed by ESI of Russia, in order to analyze the economic feasibility on the Northeast Asia Region Electrical System Ties (NEAREST) project.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.613-616
• /
• 2007

The main structures that comprise a tidal power plant are turbine structure, sluice structure, tide embankment and gate. Since these structures are founded on seabed ground, an extensive geotechnical site investigation to evaluate the engineering properties of field soils must be conducted prior to design and construction. According to the results of geotechnical site investigation conducted at the planned site for construction of Incheon bay tidal power plant, soft ground generally lie 7 meters below the seabed surface level. This research suggests the reliable and economical design of foundations and ground improvements required for construction of main structures in Incheon bay tidal power plant, with considerations on field conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.50-52
• /
• 2005

Research interests in PQ(Power Quality) measurement and monitoring system have been increased. This paper describes an experimental result for monitoring system that monitors power quality and undesirable accidents when distributed generations are connected to the power grid. Prior to develop a physical monitoring system for distributed generation applications, we constitute a mesuring system for the general PQ factors. In this paper, an approach to how to measure the PQ elements is presented by using TMS320C6701 processor. Simulation results using the PSCAD and the power system simulation equipment Dobel have verified the proposed measurement system.