• 제목/요약/키워드: Power meter

검색결과 527건 처리시간 0.023초

리노미터를 이용한 할로겐 가시광선 광조사기와 플라즈마 아크 광조사기의 복합레진 및 컴포머의 광중합 양상 비교 (COMPARISON OF LINEAR POLYMERIZATION SHRINKAGE IN COMPOSITES AND COMPOMER POLYMERIZED BY PLASMA ARC OR CONVENTIONAL VISIBLE LIGHT CURING)

  • 이재익;박성호
    • Restorative Dentistry and Endodontics
    • /
    • 제27권5호
    • /
    • pp.488-492
    • /
    • 2002
  • The purpose of this study was to evaluate the effectiveness of plasma arc curing (PAC) unit for composite and compomer curing. To compare its effectiveness with conventional quartz tungsten halogen (QTH) light curing unit, the polymerization shrinkage rates and amounts of three composites (Z100, Z250, Synergy Duo Shade) and one compomer, that had been light cured by PAC unit or QTH unit, was compared using a custome made linometer. The measurement of polymerization shrinkage was peformed after polymerization with either QTH unit or PAC unit. In case of curing with the PAC unit, the composite was light cured with Apollo 95E for 6s, the power density of which was recorded as 1350 mW/$\textrm{cm}^2$ by Coltolux Light Meter. For light curing with QTH unit, the composite was light cured for 30s with the XL2500, the power density of which was recorded as 800 mW/$\textrm{cm}^2$ by Coltolux Light Meter. The amount of linear polymerization shrinkage was recorded in the computer every 0.5s for 60s. Ten measurements were made for each material. The amount of linear polymerization shrinkage for each material in 10s and 60s which were cured with PAC or QTH unit were compared with t test. The amount of polymerization shrinkage in the tested materials were compared with 1way ANOVA with Duncan's multiple range test. As for the amounts of polymerization shrinkage in 60s, there was no difference between PAC unit and QTH unit in Z250 and Synergy Duo Shade. In Z100 and Dyract AP, it was lower when it was cured with PAC unit than when it was cured with QTH unit (p<0.05). As for the amounts of polymerization shrinkage in 10s, there was no difference between PAC unit and QTH unit in Z100 and Dyract AP. The amounts of polymerization shrinkage was significantly higher when it was cured with PAC unit in Z250 and Synergy Duo Shade (p<0.05). The amounts of polymerization shrinkage in the tested materials when they were cured with QTH unit were Z250 (6.6um) < Z100 (9.3um), Dyract AP (9.7um) < Synergy Duo Shade (11.2um) (p<0.05). The amount of polymerization shrinkage when the materials were cured with PAC unit were Dyract AP (5.6um) < Z100 (8.1um), Z250(7.0um) < Synergy Duo Shade (11.2um) (p<0.05).

전력선통신망을 이용한 HSA사업의 경제적 타당성 분석 (The Valuation of HSA Business Using Broadband over Power Line)

  • 유태호;김창섭
    • 에너지공학
    • /
    • 제16권4호
    • /
    • pp.202-214
    • /
    • 2007
  • 에너지 IT 사업을 보다 효율적으로 수행하기 위해서 뿐만 아니라 전력선 통신망을 기반으로 한 서비스 구현을 효과적으로 추진하기 위해 제시되는 개념이 HSA(Home Service Aggregator)이다. 전력선 통신망 기반의 HSA 사업 모델 개발은 새로운 에너지 분야 사업 영역의 확대와 소비자 중심의 서비스를 통한 신수요 창출의 기회를 제공할 것으로 기대를 모으기에 충분하다고 할 수 있다. 따라서 본 연구에서는 보다 효율적이고 성공적인 HSA사업 모델 개발을 위해 가장 우선적으로 행해져야할 경제성 평가를 에너지 사업자 입장에서 면밀히 분석해 정책 의사 결정에 도움을 주고자 하였다. 분석을 위한 기본 데이터 수집을 위해 총 사업 기간은 2009년도부터 2020년까지로 하였으며, HSA사업 비용의 범위로 장비 비용, 장비 설치 비용, 그리고 운영비용으로 나누어 살펴보았다. 이중 장비 비용 및 장비 설치비용은 MGW와 RMS에 대한 것이고, 운영비용은 인건비, 회선운용비 및 설비 유지 비용으로 구성하였다. 그리고, 투자 대상의 범위는 주거 밀도가 높은 도심지를 대상으로 한 약 900만 수용가로 삼았다. HSA사업을 통해서 얻을 수 있는 중요 편익 원천으로는 원격검침서비스(AMR : Automatic Meter Reading), 인터넷통합빌링 서비스, 통합과금서비스, 인터넷 서비스, 그리고 방범 서비스에 대한 편익을 분석 범주로 설정하여 경제성 평가를 수행하였다. 그리고 전기 안전 편익은 사회적 편익으로 별도로 살펴보아 HSA사업의 정책 결정에 도움을 주고자 하였다. 연구 분석 방법론으로써는 경제성평가 방법론 중 가장 많이 쓰이고 있는 현금흐름할인법을 활용한 순현재가치법을 이용하였다. 연구결과 HSA 사업의 총 투자비는 1조 400여억원으로 산출되었고, 사회적편익을 제외한 총편익은 1조 20여억원이 산출되었다고 2015년까지 투자비를 회수한다고 가정하였을때 각가구로부터 얻어야 할 편익은 월간 가구당 513원으로 분석되었다. HSA의 사업에 대한 ROI는 1에 약간 못미치는 0.954값이 나왔으나, 사회편익 요소인 전기안전 편익이 크기에 이를 모두 편익에 포함한다면 HSA사업의 경제성은 1을 넘게 됨을 확인할 수 있었다.

전동지게차용 변속 구동부 및 시험기 설계 (Design of Speed-Variable Driving System and Tester for Electric Forklift Truck)

  • 심재현;강현국;함성훈;오세훈
    • 동력기계공학회지
    • /
    • 제12권3호
    • /
    • pp.38-43
    • /
    • 2008
  • The usage of electric forklift truck is gradually increasing due to the convenience at conveying and arranging the materials in the industrial field. In this study, the author designed and suggested the optimum driving system and load tester which both of them are the most important part of the forklift truck. The planetary gear is chose to driving system because it makes big power even though the motor size is small. The gear teeth of planetary gear were designed and the designed planetary gear was tested considering the yield strength and the abrasion of gear teeth. The B-Type electric brake which consists of multiple plates and operates with non-magnetic type was connected with a single shaft in the driving system. So, it can be applied at the sudden braking situation which has the torque increment. And it has the compact size and excellent durability Load tester can give the various levels of load to the planetary gear of driving system in the electric forklift truck and it can also measure the levels of the load which were applied. Therefore, we can measure the noise, torque and perform the durability, vibration tests using load tester. It will be economical because many kinds of test can be performed using reasonable priced load tester The driving system of electric forklift truck which has sufficient competitive can be manufactured using our designed planetary gear reducer with reasonable price. The designed load tester can use for checking the performance of other reducers, as well.

  • PDF

방사성폐기물 처분시설 주변의 방사선환경조사 (Radiological Environment Investigation of Radioactive Waste Disposal Facility)

  • 백정석;정의영;안상복;김완
    • 방사성폐기물학회지
    • /
    • 제6권4호
    • /
    • pp.387-398
    • /
    • 2008
  • 원자력이용시설 주변의 방사선환경조사는 교육과학기술부 고시 제2008-28호(원자력이용시설 주변의 방사선환경조사 및 방사선환경 영향평가에 관한 고시)에 따라 주변주민들이 받게 되는 방사선량이 연간 선량한도 이내로 충분히 적게 유지되고 있는지를 확인함으로써 주변주민의 건강과 안전을 확보하고 주변 환경의 오염을 사전에 예방하는 데 있다. 그런데 국내 최초의 방사성폐기물처분시설은 시설운영을 시작하기 전 최소 2년 동안의 기초 환경조사 자료를 취득하여 부지주변의 기준 준위를 설정해야 하므로 2007년부터 2009년 상반기 방사성폐기물처분시설의 시범운영 및 2010년 상반기 준공을 목표로 방사선과 방사능에 대한 관한 기초 환경조사 자료를 취득하고 있다. 따라서 방사성폐기물처분시설 주변의 방사선환경조사에 관한 추진내용을 분석하고 최근에 취득한 2008년도 전반기 방사선환경조사결과를 바탕으로 향후 조사계획서 개정방향과 방사성폐기물처분시설 주변의 방사선환경조사를 수행하기 위해 관련 내용을 고찰하였다.

  • PDF

계측기(計測器)를 이용한 O-Ring Test법(法)의 검증(檢證)에 관(關)한 연구(硏究) (The Study of Verification Bi-Digital O-Ring Test by gauges)

  • 김정렬;김달래
    • 대한한의학회지
    • /
    • 제16권2호
    • /
    • pp.225-247
    • /
    • 1995
  • Using Bi-Digital O-Ring Test which was developed by Ohmura Toshiaki, constiution classification by the vegetables' was Measured by various muscle power measurement meters and the results are as follow: 1. Pinch Gauge (Model:pc5030HPG, Japan) is the gauge to measure finger power between the thumb and the second finger, Grip Strength Dynamometer (Model: T.K.K. 5101, Japan) is to measure the hand power (hand dynamometer), Back Strength Dynamometer (Model: T.K.K. 5102, Japan) is to measure back muscle strength, Vertical jump Meter (Model: T.K.K. 5106, Japan) is to measure the height of jump. The above gauges were and its result found that the radish, potato, carrot and cucumber can influence to muscle strength was not true. 2. When the physical constitution is distinguished by the O-Ring Test method, Taeyangin's rate appeared as average 21% although it was insisted that there will be only 0.03-0.1%. This means that the physical constitution but it appears accidently according to the examinee's emotion about the material such as vegetable etc. as favor or unfavor. 3. It was found that the result of O-Ring Test is the same at any time and at any place was not true. there is no reemergence character. 4. The import of O-Ring Test mehtod to the physical discrimination disregarded that the mental factor influences absolutely to the physical heath in the ideological physi cal constitution medical science. 5. 'O-Ring Test method is a objective judgement method.' is wrong judgement. As you see on the above result, Bi-Digital O-Ring Test set the changeable voluntary muscle as the standard of the judgument, that was first mistake logically, second in spite of leass influence of mental influence by the examiner and examinee than the vegetable discrimination influence, the test disregarded the influence. Third, only grasp of some material on hand can influence to the voluntary muscle was a wrong theory disregarding the physiology. Finally the misunderstaning his subjective view as an objective view in spite of examiner and examinee's strong influence. Therefore such kind of physical descrimination method must be sublated.

  • PDF

스마트 그리드를 위한 확장 홈 네트워크 기반의 AMI 시스템 설계 (A Design of an AMI System Based on an Extended Home Network for the Smart Grid)

  • 황유진;이광휘
    • 대한전자공학회논문지TC
    • /
    • 제49권7호
    • /
    • pp.56-64
    • /
    • 2012
  • 스마트 그리드란 기존의 전력망에 정보기술을 융합하여 에너지 효율을 최적화하는 차세대 전력망을 구성하는 기술의 하나이다. 본 논문에서는 스마트그리드를 효과적으로 구축하기 위하여 기존 홈 네트워크와 연동되고 효율적인 관리 기능을 제공하는 AMI 시스템을 제안 한다. 확장된 홈 네트워크 기반의 AMI 시스템은 스마트미터, 통신 모듈, 홈 게이트웨이, 보안 모듈, 미터 데이터 관리 시스템, 전력 응용 모듈 등으로 구성된다. 제안하는 홈 네트워크는 전력소모를 줄이고 효율적인 데이터 전송이 가능할 수 있도록 IEEE 802.15.4를 기반으로 설계하였다. 제안 홈 게이트웨이는 웹 서비스를 통해 외부 관리 시스템과 에너지 소비 정보 등을 실시간으로 교환할 수 있고, AMI 시스템은 인터넷을 통하여 홈 게이트웨이와 미터 데이터 관리 시스템 간의 양방향 통신이 가능하도록 설계되었다. 정보 전달의 안전성을 얻기 위하여 보안 알고리즘을 적용 하였으며 보안 알고리즘은 대칭적 블록 암호화 방식인 AES 알고리즘을 사용하였다. 제안 시스템을 사용하는 경우 본 연구에 제한적이기는 하지만 제어를 하지 않을 경우보다 전력 소비가 평균적으로 4~42%정도 줄어드는 것을 실험 결과에서 확인할 수 있었다.

원자로 제어봉 End-Tip 원주방향균열 와전류검사 (RCCA End-Tip Examination by ECT)

  • 이희종;남민우;정계조
    • 비파괴검사학회지
    • /
    • 제18권6호
    • /
    • pp.455-463
    • /
    • 1998
  • 경수로형 원자로 제어봉집합체(rod cluster control assembly)의 제어봉선단 봉단마개 부위에 발생할 수 있는 원주방향균열을 검출하기 위한 다중표면 와전류탐촉자를 설계하였으며, 이를 MIZ-30 주파수발생장치에 연 결하여 원주방향균열을 검출하고 원주방향길이를 측정 할 수 있는 와전류검사기술을 개발하였다. $8{\times}1$ 다중표면 와전류탐촉자는 원주방향으로 발생할 수 있는 균열 검사에 적합하도록 탐촉자 내부 원주방향으로 8개 표면코일을 일정간격으로 배치하고 코일 후방에 스프링을 설치하여 주사시 코일 머리부분이 표면에 밀착되므로서 코일과 피복관표면 사이의 lift-off 발생이 최소가 되도록 설계하였다. LCR-meter 및 HP-VEE 프로그램을 사용하여 코일의 전기적 특성을 평가하였으며, 탐촉자의 균열검출 특성은 Miz-30과 Eddynet 프로그램을 사용하여 평가하였다. 교정 standard와 시험편은 $14{\times}14$형 제어봉피복관(SS-304, 외경 : 10.95mm, 두께 : 0.48mm)을 사용하여 축방향과 원주방향으로 깊이와 길이를 달리하여 여러가지 균열성 EDM노치 (폭 0.2mm, 관두께의 15, 25, 40, 50, 60%깊이)를 가공하였으며, 이를 이용하여 탐촉자의 균열검출 및 크기측정 특성을 평가한 결과 제어봉 튜브표면에 발생한 원주균열의 검출 가능 최소길이는 3.5mm이고, 깊이는 ${\pm}5.31%$ RMS 오차 이내로 측정 할 수 있었다. 또한, 제어봉선단 봉단마개 부위에 발생할 수 있는 마모, 스크레치, 축 및 원주방향균열 신호는 신호의 위상과 신호형상을 분석하므로서 구분이 가능하였다.

  • PDF

수평 다채널관 내 이산화탄소의 증발 열전달 특성에 관한 실험적 연구 (Experimental study on characteristics of evaporation heat transfer of $CO_2$ in horizontal micro-channel tube)

  • 이상재;김대훈;최준영;이재헌;권영철
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2200-2205
    • /
    • 2007
  • In order to investigate the variation on a heat transfer coefficient during evaporation of $CO_2$, basic experiment on the evaporation heat transfer characteristics in a horizontal micro-channel tube was performed. Hydraulic diameters of micro-channels were 0.68 and 1.46 mm. The experiment apparatus consisted of a test section, a DC power supply, a heater, a chiller, a mass flow meter, a pump and a measurement system. Experiments were conducted for various mass fluxes of 300 to 800 kg/$m^2s$, heat fluxes of 10 to 40 kW/$m^2$ and saturation temperatures of -5 to 5$^{\circ}C$. With the increase heat flux, the evaporation heat transfer coefficient increased. And the significantly change of the heat transfer coefficient was observed at any heat flux and mass flux. As the saturation temperature increased and the hydraulic diameter decreased, the heat transfer coefficient increased.

  • PDF

154[kV]용 반도전층 재료의 최적저항, 비열 및 열전도 측정 (Volume Resistivity, Specific Heat and Thermal Conductivity Measurement of Semiconducting Materials for 154[kV])

  • 이경용;양종석;최용성;박대희
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권11호
    • /
    • pp.477-482
    • /
    • 2005
  • We have investigated volume resistivity and thermal properties showed by changing the content of carbon black which is the component parts of semiconducting shield in underground power transmission cable. Specimens were made of sheet form with the nine of specimens for measurement. Volume resistivity of specimens was measured by volume resistivity meter after 10 minutes in the preheated oven of both 25$\pm$1[$^{\circ}C$] and 90$\pm$1[$^{\circ}C$]. And specific heat (Cp) and thermal conductivity were measured by Nano Flash Diffusivity and DSC (Differential Scanning Calorimetry). The measurement temperature ranges of specific heat using the BSC was from 20[$^{\circ}C$] to 60[$^{\circ}C$], and the heating rate was 1[$^{\circ}C$/min]. And the measurement temperatures of thermal conductivity using Nano Flash Diffusivity were both 25[$^{\circ}C$] and 55[$^{\circ}C$]. Volume resistivity was high according to an increment of the content of carbon black from these experimental results. And specific heat was decreased, while thermal conductivity was increased by an increment of the content of carbon black. And both specific heat and thermal conductivity were increased by heating rate because volume of materials was expanded according to rise in temperature.

원격 전력관리 서비스를 위한 모니터링 시스템 개발 (Development of Monitering System for Remote Power Management Service)

  • 박지상;전민호;이명의
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 춘계학술대회
    • /
    • pp.601-604
    • /
    • 2012
  • 최근 유 무선 통신을 이용하여 원격으로 기기의 상태나 센서 등의 입력장치를 모니터링하거나 출력장치를 제어하기 위한 여러 가지 많은 시도가 있었으며 이에 대한 연구 및 개발도 활발하게 진행되고 있다. 본 논문에서는 다수의 세대를 가지고 있는 아파트의 관리사무소와 세대 사이에 전용 통신망을 개설하여 세대에서 사용하는 전력의 사용량을 입주자가 부재시에도 원격으로 전력 사용량을 검침하고 컴퓨터로 에너지 사용량을 정확하게 검침함으로서 검침요원의 수동검침으로 인한 오류를 없애 입주자와 관리자간의 신뢰성을 확보할 수 있는 모니터링 시스템을 개발한다.

  • PDF