• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.313-322
• /
• 2000

This paper presents optimal placement of minimal set of Phasor Measurement Units (PMU's) and observability analysis of the network with PMU's. In order to find a observable system, a symbolic method which directly assigns an appropriate symbol for measurement or pseudo-measurement to every entry of node-branch incidence matrix is proposed. It is much simpler and easier to analyze the observability of the network with PMU's than the conventional ones. For the optimal PMU placement problem, two approaches which are based on a modified Simulated-Annealing (SA) method and a Direct Combination method are proposed. Some case studies with IEEE sample system are made to show the performance of the proposed methods are almost alike and more effective than the conventional simulated-annealing method. It is also shown that the Direct Combination method is more effective than the modified simulated-annealing one in the sense of computation burden. The results of this study showed also that the accuracy of power system estimation and system observability can be improved the proposed PMU placements.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권9호
• /
• pp.455-458
• /
• 2004

In this paper, we investigated impurities content and physical properties showing by changing the content of carbon black that is semiconductive materials for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Impurities content of specimens was measured by ICP-AES (Inductively Coupled Plasma Atomic Emission Spectrometer), and density of specimens were measured by density meter And then specific heat (Cp) was measured by DSC (Differential Scanning Calorimetry). A ranges of measurement temperature were from $0^{\circ}[C]$ to $200^{\circ}[C]$, and heating temperature was $4^{\circ}[C/min]$. Impurities content was highly measured according to increasing the content of carbon black from this experimental result, also density was increased according to these properties. Especially impurities content values of the Al and A2 of existing resins were measured more than 4000［ppm］. Specific heat from the DSC results was decreased according to increasing the content of carbon black. Because ionic impurities of carbon black having Fe, Co, Mn, Al and Zn are rapidly passed kinetic energy increasing the number of times breaking during the unit time with the near particles according to increasing vibration of particles by the applied heat energy.

• 분석과학
• /
• 제8권4호
• /
• pp.427-434
• /
• 1995

Inductively coupled plasma mass spectrometry combined with the isotope dilution method is used for the determination of lithium. The isotope dilution method is based on the addition of a known amount of enriched isotope (spike) to a sample. The analyte concentration is obtained by measuring the altered isotope ratio. The spike solution is calibrated through so called reverse isotope dilution with a primary standard. The spike calibration is an important step to minimize error in the determined concentration. It has been found essential to add spike to a sample and the primary standard so that the two isotope ratios should be as dose as possible. Since lithium is neither corrosive nor toxic, lithium is used as a chemical tracer in the nuclear power plants to measure feedwater flow rate. 99.9% $^7Li$ was injected into a feedwater line of an experimental system and sample were taken downstream to be spiked with 95% $^6Li$ for the isotope dilution measurements. Effects of uncertainties in the spike enrichment and isotope ratio measurement error at various spike-to-sample ratios are presented together with the flow rate measurement results in comparison with a vortex flow meter.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.63-69
• /
• 2007

The evaporation pressure drop of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and an evaporator (test section). The test section consists of a smooth, horizontal stainless steel tube of 4.57 mm inner diameter. The experiments were conducted at saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$, and heat flux of 10 to $40kW/m^2$. The test results showed that the evaporation pressure drop of $CO_2$ are highly dependent on the vapor quality, heat flux and saturation temperature. The measured pressure drop during the evaporation process of $CO_2$ increases with increased mass flux, and decreased saturation temperature. The evaporation pressure drop of $CO_2$ is much lower than that of R 22. In comparison with test results and existing correlations, the best fit of the present experimental data is obtained with the previous correlation. But existing correlations failed to predict the evaporation pressure drop of $CO_2$. Therefore, it is necessary to develop reliable and accurate predictions determining the evaporation pressure drop of $CO_2$ in a horizontal tube.

• 한국통신학회논문지
• /
• 제35권9B호
• /
• pp.1407-1415
• /
• 2010

최근 전 세계적으로 많은 관심을 받고 있는 스마트 그리드는 기존 전력망의 에너지 효율을 최적화하고자 하는 차세대 전력망을 말한다. 그 중에서 수요 반응(Demand Response)은 현재 전력망과 차별화되는 핵심 기술이다. 가정에서 전력 요금의 최소화 및 사용자의 만족도를 최대화하기 위해, 본 논문은 가정에서 사용하고 있는 여러 종류의 전력 기계의 특성을 활용하여, 최적화 문제를 통한 스케쥴링 알고리듬을 제안한다. 여러 전력 기계의 소비패턴을 수학적 모델로 유도하였으며, 하루 동안 각 시간에서 전력 기계의 중요도에 따른 최적화된 스케쥴링 기법을 제안한다. 실제 통계 수치를 활용한 본 논문의 실험 결과에서는 제안하는 최적화 스케쥴링 알고리듬이 전력요금을 최소화하는 유틸리티에 매우 효과적인 것으로 나타났다.

• 한국안전학회지
• /
• 제11권3호
• /
• pp.81-88
• /
• 1996

In order to investigate the electrical properties of transformer oils for large power, the characteristics of AC and Impulse breakdown in gap length of 1.0~2.5mm and that of volume resistivity were researched in temperature range of 20~$100^{\circ}C$. An geometrical capacitance of electrode with coaxial cylindrical shape for measuring the volume resistivity was 16pF, and highmegohm meter with model no. VMG-1000 was used, and also the applied voltage were DC 100, 250 and 500V. In the dependance of breakdown characteristics due to electrode gap length, it was confirmed that breakdown voltage was nearly uniform by volume effect according to the increase of gap. In the characteristics for AC breakdown, the dielectric strength was increased to $90^{\circ}C$ but decreased over $90^{\circ}C$, and also in case of impulse breakdown, it was increased to 7$0^{\circ}C$ and at dated $70^{\circ}C$ over in temperature range. The calculated mobility of oils in the characteristics for impulse breakdown were about $10^{-5}$~$10^{-4}cm^2/V{\cdot}S$, and the value of volume resistivity was almost invariable in low temperature range, regardless of voltage by the stable thermal properties, and it indicated a peak at $50^{\circ}C$ and had a sudden change to decrease over that temperature, and also the value of volume resistivity in 250V/mm at $80^{\circ}C$ is suitable for the International electrical standards, it was confirmed.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.201-207
• /
• 2020

With the expansion in the use of DC power systems and increased need for system maintenance, the development of measurement devices for maintenance requires high stability. Of the different kinds of DC current measurement devices, the single-shot measurement device causes the input signal of the current measuring unit to initially generate a high inrush current. The high inrush current flows into the signal processor of the meter, shortening the life of the internal fuses and causing failure. Therefore, in this study, the I²t value for increasing the durability of the fuse is designed using the available wire diameter. Operating characteristics for 210~400% over-current of the rated current, which is relatively low over-current, are realized by the plating of low melting tin metal. As a result, a method of designing a fuse element for a DC power supply, which improves the safety of the DC current measurement device by blocking the failure caused by the inrush current, is presented.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2038-2042
• /
• 2010

In this paper, we confirmed the thermal & optical properties for improving the heat transfer coefficient by changing the via hole size and in FR4 PCB with the same area. Osram 1W power LED Package (Golden Dragon) was used and the K-factor which is relative constant between LED junction temperature and forward bias was measured with power source meter(KEITHLEY 2430) to measure the thermal resistance from PCB configuration. As results, thermal resistance in metal PCB came out to the lowest as $26 [^{\circ}C/W]$ and thermal resistance in FR4 PCB without via-holes emerged as the highest as $69 [^{\circ}C/W]$. However thermal resistance of FR4 PCB could have decreased until $32[^{\circ}C/W]$ in 0.6 mm by using the via hole. Also, the luminous flux could have improved, too.

• 정보보호학회논문지
• /
• 제29권3호
• /
• pp.685-692
• /
• 2019

스마트그리드는 기존의 단방향 전력 전송에서 나아가 양방향 정보 교환이 이루어지는 시스템으로 전력의 이동 및 소요량에 대한 실시간 파악이 가능하다. 전력 생산자는 전력 소모량 집계 결과로부터 향후 전력 생산량 예측이 용이하며, 사용자 또한 다수 전력원으로부터의 단위 사용 비용을 고려한 선택적 전력 사용 및 전력 절약 계획 수립이 용이해져 자원의 효율적 생산 및 사용을 가능하게 한다. 반면 자원의 사용 및 이동에 대한 실시간 정보 수집은 개인의 프라이버시를 침해할 수 있는 위험성을 내포하고 있다. 이러한 스마트그리드에서의 전력량 집계 과정에서 프라이버시 침해를 방지하기 위하여, 본 논문에서는 동형 암호화 기법을 활용함으로써 단순 합계를 포함한 복합 연산을 허용하는 유연하면서도 효율적인 전력량 집계 및 분석 기법을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1391-1393
• /
• 2002

There arc some problems on storage batteries which are called Secondary Battery, such as long charging time, limited cycle life, low coulomb efficiency and inaccurate residual power meter. To solve those problems, a complex system of capacitors and Super Capacitors of increased energy density. Though the capacitors alone arc not capable of delivering stable output, the accompanied circuits compensate the various characteristics all through the charge-and discharge-cycle. This paper deals with Energy Storage System with Super Capacitor for PV System Discussed in this paper are, explains the accompanied circuits of Super Capacitor which is compared with the Second Batteries.