• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.77-85
• /
• 2008

This work proposes a 12b 130MS/s 108mW $1.8mm^2$ 0.18um CMOS ADC for high-quality video systems such as TFT-LCD displays and digital TVs requiring simultaneously high resolution, low power, and small size at high speed. The proposed ADC optimizes power consumption and chip area at the target resolution and sampling rate based on a three-step pipeline architecture. The input SHA with gate-bootstrapped sampling switches and a properly controlled trans-conductance ratio of two amplifier stages achieves a high gain and phase margin for 12b input accuracy at the Nyquist frequency. A signal-insensitive 3D-fully symmetric layout reduces a capacitor and device mismatch of two MDACs. The proposed supply- and temperature- insensitive current and voltage references are implemented on chip with a small number of transistors. The prototype ADC in a 0.18um 1P6M CMOS technology demonstrates a measured DNL and INL within 0.69LSB and 2.12LSB, respectively. The ADC shows a maximum SNDR of 53dB and 51dB and a maximum SFDR of 68dB and 66dB at 120MS/s and 130MS/s, respectively. The ADC with an active die area of $1.8mm^2$ consumes 108mW at 130MS/s and 1.8V.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.317-329
• /
• 1998

In this paper, we have analyzed the packet error probability of DS/CDMA-Trellis Coded QPSK modulation signal with MRC(Maximum Ratio Combining) diversity reception in Rician fading, multi-user interferences and multipath channel. And then we have evaluated the performance and capacity of DS/CDMA-Trellis Coded QPSK system using the MRC diversity reception as a function of direct power to indirect power ratio ($K_R$), the number of diversity branch(M), the number of multi-user(U), PN chip rate(PN), the number of multipath channel($L_P$), and packet length(PL). From the results, we know that the coding gain of DS/CDMA-Trellis Coded QPSK system with 2 branch MRC diversity is about 6 dB against uncoded DS/CDMA BPSK system with 2 branch MRC diversity in Rician fading ($K_R=6dB), 5 multi-user interferences, and 3 multipath channel. And, we know that coded QPSK signal designed for the AWGN channel also perform well on a Rician fading channel with MRC diversity reception. Consequently, we expected that proposed system structure is reliable to the wireless data communication system in Rician fading, multi-user interferences, and multipath channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.389-398
• /
• 2011

In this paper, the design and fabrication of a transmit/receive(T/R) module for Ka-band phased array radar is presented. A 5bit digital phase shifter and digital attenuator were used in common for both transmitter and receiver considering unique Ka-band characteristic. The circulator was excluded in the T/R module and was placed outside T/R module. The transmitting power per element antenna is designed to be about 1 W and the noise figure is designed to be below 8 dB. The designed T/R module RF part has a compact size of $5\;mm{\times}4\;mm{\times}57\;mm$. In order to implement the T/R module, MMICs used in T/R module was separately assessed before assembly of the designed T/R module. The transmitter of the fabricated T/R module shows about 1 W at 5 dBm unit module input power and the receiver shows a gain of about 20 dB and a noise figure of below 8 dB as expected in the design stage.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.81-90
• /
• 1999

This paper describes an EEG(electroencephalogram) software for two-channel cerebral function monitoring system to detect the cerebral ischemia. In the software, two-channel bipolar analog EEG signals are digitized and from the signals various EEG parameters are extracted and displayed on a monitor in real-time. Digitized EEG signal is transformed by FFT(Fast Fourier transform) and represented as CSA(compressed spectral array) and DSA(density spectral array). Additional 5 parameters, such as alpha ratio, percent delta, spectral edge frequency, total power, and difference in total power, are estimated using the FFT spectra. All of these are effectively merged in a monitor and displayed in real-time. Through animal experiments and clinical trials on men, the software is modified and enhanced. Since the software provides raw EEG, CSA, DSA, simultaneously with additional 5 parameters in a monitor, it is possible to observe patients multilaterally. For easy comparison of patient's status, reference patterns of CSA, DSA can be captured and displayed on top of the monitor. And user can mark events of surgical operation and patient's conditions on the software, this allow him jump to the points of events directly, when reviewing the recorded EEG file afterwards. Other functions, such as forward/backward jump, gain control, file management are equipped and these are operated by simple mouse click. Clinical tests in a university hospital show that the software responds accurately according to the conditions of patients and medical doctors can use the software easily.

• Journal of Nutrition and Health
• /
• v.32 no.5
• /
• pp.540-551
• /
• 1999

This study was performed to investigate the effects of dried leaf powders and ethanol extracts of Perilla frutescens(perilla leaf), Artemisia princeps var. orientalis(mugwort) and Aster scaber(chamchui) on lipid metabolism and antioxidative capacity in rats. Forty-nine male Sprague-Dawley rats weighing 105.9$\pm$1.7g were blocked into seven groups according to body weigth and raised for four weeks with diets containing 5% dried powders of perilla leaf, mugwort and chamchui, or ethanol extracts from the same amount of each dried leaf powder. Food intake was higher in the control and chamchui powder groups than the other remaining groups. Weight gain was not significantly different among all experimental groups. Food efficiency ratio was highest in the perilla leaf powder group. Plasma total lipid and cholesterol, liver total lipid and triglyceride levels were highest in the perilla leaf powder group. In contrast, dried powders of mugwort and chamchui showed hypolipidemic effects in plasma and liver. Plasma and liver TBARS levels in both dried powder and ethanol extract groups of the three plants were lower than control. There was also no significant difference between corresponding dried powder and ethanol extract groups. Catalas and GSH-Px activities in erythrocyte and liver were not different among all the experimental groups. However, SOD activities were significantly different among the esperimental groups. In erythrocyte. SOD activiteis of all dried powder and ethanol extract groups except the perilla leaf powder group were higher than control, and the chamchui power group showed the highest activity among them. In liver, all the plant groups showed higher SOD activities than control. There was no significant difference between corresponding dried powder and ethanol extract groups. In conclusion, the dried chamchui powder and liver. All the dried plant powder and ethanol extract were effective in decreasing the TBARS levels of liver and particularly plasma. Among the antiocidative enzymes, SOD activity was most responsive to the experimental diets. All the plant groups showed increases in liver SOD activities and there were more increments in dried powder groups. Since the effects of dried powder groups on lipid metabolism were better than those of extract groups, it is plausible that the high dietary fiber level in dried powders was effective. Antioxidative effects were not significantly different between corresponding dried power and extract groups, and it was thought that ethanol extracts from three plants also had similar antioxidative effects as dried powderers.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.162-167
• /
• 2015

This paper describes the reason and the problem solving for the double-layer pattern of a Daejeon correlator operated in Korea-Japan Correlation Center. When the electric power of an input signal in the correlator is charged small enough to be buried in the noise, it is hard to see a signal with a specific pattern in the input signal, but when the electric power is large, a specific one is reported to be seen. By comparing data from observation with one from software correlator, it was confirmed from the analysis using the AIPS software that the amplitude gain of a source signal was affected about 3%. Therefore, in order to solve the problem of double-layer patterns, we found that a problem in the memory management module responsible for both the data input and the data serialization of the correlator is a cause for the double-layer pattern detected periodically. In other words, while data is serialized and read repeatedly in the memory area assigned to serialize the data from the serialization module, redundant last data is generated and an overlap for the memory allocation is occurred. Therefore, by modifying the program of the FPGA memory sections on serialization module to correct the problem, we confirmed that double-layer pattern is disappeared and correlation results are normally acquired.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.638-644
• /
• 2018

Relay systems have recently gained attentions because of its capability of cell coverage extension and the power gain as the one of key technologies for 5G. Relays can be exploited for small-cell base stations and the autonomous network, where communication devices communicate with each other cooperatively. Therefore, the relay technology is expected to enable the low power and large capacity communication. In order to maximize the benefits of using a limited number of relays, the efficient relay selection method is required. Especially, when two nodes exchange their data with each other via relay, the relay selection can maximize the average data rate by the spatial location of the relay. For this purpose, the average data rate is analyzed first according to the relay selection. In this paper, we analyzed the average data rate when two nodes exchange their data via dual-hop decode and forward relaying considering the interference by the concurrent transmission under Nakagami-m fading channel. The correctness of the analysis is verified by the Monte Carlo simulation. The results show that the concurrent transmission is superior to the non-concurrent transmission in the high required data rate region rather than in the low required data rate region.

• The Korean Journal of Archival Studies
• /
• no.45
• /
• pp.121-153
• /
• 2015

Struggles to gain acknowledgement of identity have a characteristic of movement to recover human dignity. Participants in this movement come to confirm themselves as the subject of rights and communicate one another, free from oppression. Being guaranteed the opportunity to participate in the public opinion formation process is an indispensable element of human rights. In 1980, though it was short and incomplete, Gwangju experienced communal autonomy under the condition that state power was temporarily stopped. The contents and memories of the Gwangju Democratization Movement that intended to protect autonomy of civil society, resisting pillage of state power, remain intact in the 1980 Archives for the May 18th. The 5.18 archives were registered in UNESCO's Memory of the World in 2011, with its value of human rights and protection of democracy being acknowledged. The 5.18 archives have memories of resistance and struggles for justice, and sacrifices and pains of citizens under oppressive political authority in Gwangju, 1980. Thus, these archives are related to the historical struggles for democracy, and suggest a lesson on the transition process towards democracy to us. Preservation and utilization of the documentary heritage constantly lead the memories of historical events to the present, and enable exchanges of experiences and ideas between the present and the future. This study, through the process of UNESCO's Memory of the World registration and post-registration process, beyond the value of archives, tries to examine how historical events are led to the present, through the archives and to discuss the other values of archives.

• Asia Marketing Journal
• /
• v.15 no.1
• /
• pp.57-81
• /
• 2013

The purpose of this paper is to seek ways to improve the competitiveness of Korea's fashion industry by utilizing the source of competitiveness of Japan's fashion industry, which represents the world's leading countries in terms of fashion, so that Korea can better enter the global fashion market. The study shall first compare the competitiveness of the Japanese and Korean fashion industries by utilizing the generalized double diamond model; second, provide an understanding of what the Japanese fashion industry can offer to Korean fashion industry and companies - that is, understand what the Japanese fashion industry's competitive edge is; and third, study the kind of global competitiveness that Korea's fashion industry must achieve. To adopt a generalized double diamond model to compare the competitiveness of the Korean and Japanese fashion industries, we selected 31 sub-variables to act as determinants of the model. That is, we extracted 31sub-variables by doing research of literature to analyze national competitiveness of the fashion industries. To measure these 31 sub-variables, secondary data was gathered. We collected data related to each sub-variable from various sources of Korea and Japan. And to calculate the competitiveness index, we took three steps with reference to previous studies. We found that status of the fashion industry of the two countries as it stands. That is, Japan is an advanced country of which fashion industry is domestic market-oriented while Korea is a small open economy that mainly focuses on the foreign market. Out of 31 proxy variables, Korea's fashion industry shows higher measurements relating to production and export than Japan, but Japan's fashion industry reports higher measurements than Korea in the fields of R&D, design and brand power, the rate of value added, the efficiency of companies and globalization. In order for Korea's fashion industry to achieve competitiveness in the global market, it should pursue the following development direction. First, it is very difficult for Korea to follow the footsteps of the U.S. and Japanese fashion industries that are able to take advantage of economies of scale, because Korea is smaller than those countries. Therefore, in the case of small economies such as Singapore, strengthening of international activities will practically improve domestic determinants that Korea should improve its domestic diamond by enhancing the current competitiveness of its international diamond. In other words, Korea needs to further endeavor to develop and expand global resources and markets as well as improve its competitiveness in terms of R&D, design and brand power, the rate of value-added, and the efficiency of companies. As the Korean fashion industry shows relatively advanced level of information technology and the fashion education system, it has considerable potential to grow. Korea is expected to have a huge growth potential since it has relatively higher level of information technology, fashion education system and activities than those of Japan in both the domestic diamond and international diamond. In particular, a better environment is laid out before Korea to gain competitiveness in the fashion industry due to the recently growing influence of the Korean Wave that Korea is expected to grow as a leader in the Asian market as well as in the global market.