• Journal of Climate Change Research
• /
• v.4 no.2
• /
• pp.105-114
• /
• 2013

Recently, foreign direct investment of Korea has increased significantly. Foreign direct investment is motivated by various reasons and renewable energy investments in foreign countries can be performed by many causes. Korean companies can enjoy the export of products, related EPC contracts, acquisition of the knowledge of the project management technique, pre-occupying effect of the market and profit itself. Wind power projects have biggest share in the investment amounts among the renewable energy business. So, in this study, one wind farm project was selected and supposed to be invested in China, USA, Germany and UK at the same time and the effect of electricity price, corporate income tax, inflation rate and interest rate of debt were analyzed. The result showed that investing in Germany is most profitable because of the highest electricity price and electricity price and debt interest rate are the most sensitive factors for IRR. This approach would be helpful to make decisions in investing foreign wind power projects.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.142-154
• /
• 2023

As the importance of the environment has been recognized worldwide, the need to calculate and reduce carbon emissions has been drawing an increasing attention throughout various industrial sections. Thereby the discipline of LCA (Life Cycle Assessment) involving raw material preparation, production processes, transportation and installation has been established. There is a clear research gap between the need and the practice for Korean Case of renewable energy industry, particularly wind power. To bridge the gap, this study conducted LCA research on wind power generation in the Korean area of Yeongdeok, an example of a domestic onshor wind power complex using SimaPro, which is the most widely used LCA system. As a result of the study, the energy recovery period (EPT) of one wind turbine is about 10 months, and the GHG emitted to generate power of 1 kwh is 15 g CO₂/kWh, which is competitive compared to other energy sources. In the environmental impact assessment by component, the results showed that the tower of wind turbines had the greatest impact on various environmental impact sectors. The experience gained in this study can be further used in strengthening the introduction of renewable energy and reducing the carbon emission in line with reducing climate change.

• Journal of Biosystems Engineering
• /
• v.2 no.2
• /
• pp.37-45
• /
• 1977

Solar energy is a potential source of power that offers much promise being used for low-temperature applications like drying farm crops, space heating, and water heating for domestic uses. Already much of it are being used for those purpose in foreign countries. However, very little research has been done to determine the possibility of using the solar energy in Korea. This study was conducted to develop the general prediction equation of the total radiation on a horizontal surface in Daejeon area based on 5 years 91972, Jun.1-1976. Dec.31) meteorological data (bright sunshine hours, average total horizontal radiation), and to obtain experimentally the thermal efficiency of solar air and water collectors, which will be used as a basic data of designing flat-plate solar collector system.In addition to the thermal efficiency of the collectorsthe relationship among those factors affecting it such as weather condition, orientation factor, and tilted angle of collector was analyzed. The results of this study were as follows. 1. The general predicted equation of the total radiation on a horizontal surface in Daejeon area based on bright sunshine hours was developed as $H_{av} =(1.546\frac{n}{N}-0.582)H_o$. Predicting the total radiation on a horizontal surface by the above equation was thought to be possible because to values of 0.882 was smaller than any t values at above 0.05 level on the basis of two tailed test of the difference between the calculated and the recorded values. 2.It was observed that optimum tilt angle of the collector in the summer and the autumn drying season was 13 degrees and 51 degrees respectively, these values could be obtained by adding or substracting approximately 25 degrees from the latitude of this area $(36.3^{\circ}N)$ .The relationship between orientation factor and declination of sun at suitable tilt angle of 33 degrees $(s=0.9\O)$ was shown at Fig.4. 3.The thermal efficiency of solar wdter collector was shown 13.4-51. 6% on Aug. 15 (the minimum radiation recorded) and 43.8 ~537% Aug.20 (the maximum radiation recorded), and 13.8~ 46.6 and 44.3~ 49.7 were shown on each corresponding day. 4.The thermal efficiency of the collectors according to the weather condition was shown a big difference of about 10% between the day of the maximum radiation recorded and the minimum, but the differen of efficiency between the air and the water collector was at most 2 ~ 3%. 5. Even if the efficiency of the solar water collector was a little higher than the solar air collector, for drying farm products, the solar air collector was thought to be more effective because the air heated by collector could be directly used for drying them.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.303-316
• /
• 2005

Strong radar returns were observed in oyster sea farms, and coherent interferometric pairs were successfully constructed. Tide height in coastal area is possible to be measured by using interferometric phase and intensity of SAR data. This SAR application technique for measuring the tide height in the near coastal zone can be further improved when applied to double bounce dominant areas. In this paper, we investigate the characteristics of polarimetric signature in the oyster farm structures. Laboratory experiments were carried out using Ku-band according to the target scale. Radar returns from vertical poles are stronger than those from horizontal Pole by 10.5 dB. Single bounce components were as strong as double bounce components and more sensitive to antenna look direction. Double bounce components show quasi-linear relation with the height of vertical poles, which implies double bounce is more useful to determine water level than total power. A L-band NASA/IPL airborne SAR (AIRSAR) image was classified into single-, double-bounce, and volume scattering components. It is observed that oyster farms are not always characterized by double bounced scattering. Double bounce is a main scattering mechanism in oyster farms standing above seawater, while single bounce is stronger than double bounce when bottom tidal flats are exposed to air. Ratios of the normalized single to double bounce components in the former and latter cases were 0.46 and 5.62, respectively. It is necessary to use double bounce dominant sea farms for tide height measurement by DInSAR technique.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.265-278
• /
• 2022

The global energy paradigm is rapidly changing by centering on carbon neutrality, and wind energy is positioning itself as a leader in renewable energy-based power sources. The success of onshore and offshore wind energy projects focuses on securing the economic feasibility of the project, which depends on securing high-quality wind resources and optimal arrangement of wind turbines. In the process of constructing the wind farm, the optimal arrangement method of wind turbines considering the main wind direction is important, and this is related to minimizing the wake effect caused by the fluid passing through the structure located on the windward side. The accuracy of the predictability of the wake effect is determined by the wake model and modeling technique that can properly simulate it. Therefore, in this paper, using WindSim, a commercial CFD model, the wake diffusion pattern is analyzed through the sensitivity study of each wake model of the proposed onshore wind farm located in the mountainous complex terrain in South Korea, and it is intended to be used as basic research data for wind energy projects in complex terrain in the future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.4
• /
• pp.266-273
• /
• 2015

In this paper, annual wind data in 2014 at six locations(Seosudo, Gadaeam, Sibidongpa, Galmaeyeo, Haesuseo, Jigwido) are collected and analyzed in order to review optimal candidate site for offshore wind farm in the Western Seas of Korea. Observed wind data is fitted to Rayleigh and Weibull distribution and annual energy production is estimated according to wind frequency. GWE-3kH(3 kW-class) and GWE-10KU (10 kW-class) turbine are selected as wind turbine. Also, power curve are used to calculate wind energy potential. As a result, annual mean wind speed at six locations(Seosudo, Gadaeam, Sibidongpa, Galmaeyeo, Haesuseo, Jigwido) were calculated about 4.60, 4.5, 5.00, 5.13, 5.51, 5.90 m/s, respectively. In addition, annual energy production were estimated at 10,622.752, 11,313.05, 13,509.41, 14,899.55, 17,106.13, 19,660.85 kWh. Generally, annual mean energy density were between poor and marginal class and capacity factor at Jigwido was calculated at 22.44%. Its value is higher than the others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.48-53
• /
• 2017

One of the policies of the Ministry of Agriculture, Forestry and Livestock Food and Livestock aims to export $10 billion worth of products. Although it was not easy to achieve the export goal of $ 6.5 billion in 2016, the policy should be pursued continuously. Accordingly, a facility modernization project and high-tech greenhouse project are being implemented to facilitate exports. Moreover, it is possible to consider substitution of imports in the policy shift. Imports of temperate and tropical fresh fruits totaled 1.2 trillion won in 2016. Accordingly, identification of alternatives to tropical and temperate fresh fruit imports will enable farm income to increase and the fresh fruit industry to grow. The major obstacle to tropical fruit production in Korea is high heating costs. However, Jeju Island apple mango farmers found that using non-taxable kerosene and hot water from power plants could reduce heating costs by 42.5%. Indeed, using hot wastewater can reduce heating costs by more than 40%. To improve competition with imported fruits, farmers can change their heating systems using financial support plans (e.g., 20% government subsidies, 20% loans, 30% subsidies from local governments). The income effect and import substitution effect of fruit tree farmers should be carefully analyzed in the future and the study will be closed to discuss the policy direction.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.1
• /
• pp.75-84
• /
• 2012

Mechanized operation model and mechanical cultivation technology for winter barley, rye, Italian ryegrass and sudan grass wrap silage production system at the paddy field for cropping system was developed. Also, a series of experiment were performed and lots of data were collected and analyzed to develope mechanical technology, coverage area, and optimum size of the farm (break-even point) for wrap silage production system. The coverage area for winter barley or rye wrap-silage production system is determined around 61.9, 73.4, 77.5, 88.2 ha in the case of drill seeding and different ripening species by tractor power 50, 75, 100, 130 ps, respectably. The break-even point of the farming size is analyzed as 20 ha and its production cost is estimated around 367, 383, 430, 443 won/TDN-kg in the case of winter barley wrap-silage by tractor power 50, 75, 100, 130 ps, respectably. The break-even point of the farming size is analyzed as coverage area and its production cost is estimated around 237, 215 won/TDN-kg in the case of winter barley wrap silage and sudan grass by the tractor power 50, 100 ps, respectably.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.357-370
• /
• 1982

Recent concern regarding price and availability of fossil fuels has spurred the interest in alternative sources for farm crop drying. Among the available options such as biomass energy, wind power, nuclear energy and solar energy etc., the increasing attention is being directed to the utilization of heat from solar energy especially for farm crop drying. Even though solar energy is dispersed over a large land area and only a relatively small amount of energy can be simply collected, the advantages of solar energy is that the energy is free, non-polluting. The study reported here was designed to help supply the informations for the development of simple and relatively inexpensive solar warehouse for farm crop drying and storage. Specifically, the objectives of this study were to determine the performance of the solar collector fabricated, to compare solar supplemented heat drying with natural air drying and to develop a simulation model of temperature in stored grain, which can be used to study the effects due to changes in ambient air temperature. For those above objectives, solar collector was fabricated from available materials. Corrugated steel galvanized sheet, painted flat black, was used as absorbers and clear 0.2mm polyethylene sheet was the cover material. The warehouse for rough rice drying and storage was constructed with concrete block, and the solar collector was used as the roof of warehouse instead of original roofing system of it. The results obtained in this study were as follows: 1. The thermal efficiency of the solar collector was average 26 percent and the overall heat transfer coefficient of the collector was approximately $25kJ/hr.m^2\;^{\circ}K$. 2. Solar heated air was sufficient to dry one cubic meter of rough rice from 23.5 to 15.0 percent in 7 days and natural air was able to dry the same amount of rough rice from 20.0 to 5 percent in l2 days. 3. Drying with solar heat reduced the required drying time to dry the same amount of rough rice into a half compared to natural air drying, but overdrying problems of the bottom layer were so severe that these problems should be thoroughly analyzed. 4. Simulation model of temperature in stored grain was developed and the results of predicted temperature agreed well with test results. 5. Based on those simulated temperature, changes in the grain-temperature were a large at the points of the wallside and the damage of the grain would be severe at the contact area of wall.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.115-122
• /
• 2015

Purpose - This study was conducted to develop a beekeeping farm management standard checklist. This is essential to increase the competitive power of beekeeping farmers. Checklists in relation to crops and livestock were established by the Rural Development Administration in the 2000s. To date, 60 checklists have been created by crop and livestock experts. However, other farmers outside the 60 checklists are increasing. Therefore, extra development is required for these farmers. This study was conducted to meet farmers' requirements. The special farming dealt with in this study is beekeeping. Such checklists were not developed due to the small number of beekeeping farmers. However, these days, a number of such farmers are emerging. Research design, data, and methodology - Many related experts participated in this study. This study was conducted in four stages. First, a basic outline of beekeeping was created by surveying many kinds of beekeeping experts. The draft of the beekeeping checklist was created by a secondary advisory council. This draft was then sent to 14 beekeeping experts to confirm whether or not it was suitable as a management checklist. For collecting the experts' opinions, a direct visit survey was done through an arranged questionnaire. Additionally, a basic management checklist blueprint was reviewed by many experts. In the third stage, a Delphi survey method was utilized with a special Delphi questionnaire. In this stage, experts who participated in the first and second stages were excluded. As there were uncertain answers among them, a second Delphi survey was done. As a result of this survey, all answers were agreed among them. Results - From the results of this survey, four subjects in the management accomplishment index were determined. These are farming scale, average product per beehive, the sale price of honey (1kg), and the number of bee plates in the beehive. In the case of the management checklist content, five items were determined. These are beekeeping farming facilities, the environment around the farm land and general management, the product management of the beekeeping harvest, the management of the disease and pest, and farming management. This checklist will be utilized for beekeeping farmers to implement in a management situation. Conclusions - These days, the number of beekeeping farmers is increasing. The management checklist for beekeeping farmers will be used to improve their farming situation and marketing. Beekeeping farmers can understand their management by reviewing their checklist. After checking, the situation of management can be analyzed. Farmers can supplement weaknesses with expert advice. This checklist will be used by agricultural technique extension workers for farming management consulting. This checklist has to be complemented by a change in the management of the environment. This checklist will be delivered to beekeeping farmers after a verification survey is done. The result of the checklist score will be utilized for a benchmarking service to be implemented for beekeeping farmers to utilize.