• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.27-33
• /
• 2022

Sleep is an essential factor for living a healthy life, but most modern people complain of poor sleep. For these people, as the need for a means to simply evaluate and manage the quality of sleep increases, devices that can check the sleep state at home without monitoring by an examiner are being developed. The smart sleep mask, which is the subject of this usability test, provides bio-signal monitoring while sleeping so that you can conveniently measure and manage your sleep state for yourself. The purpose of this study is to evaluate the usability and safety of the smart sleep mask, to find and prevent potential factors related to errors in use that may occur, and to develop the comfort and safety of this product. As a result of the formative evaluation of the sleep mask prototype, it was reported that it was difficult to turn on the power and check the results, and that the sleep mask was not comfortable to wear. Different opinions were presented on the size and weight of the sleeping mask by people in different age groups.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.5
• /
• pp.23-36
• /
• 2010

Signcryption is a cryptographic primitive which offers authentication and confidentiality simultaneously with a cost lower than signing and encrypting the message independently. We propose a new cryptographic notion called Identity-based online/offline signcryption. The notion of online/offline scheme can be divided into two phases, the first phase is performed offline prior to the arrival of a message to be signed or encrypted and the second phase is performed online phase after knowing the message and the public key of recipient. The Online phase does not require any heavy computations such as pairings or exponents. It is particularly suitable for power-constrained devices such as smart cards. In this paper, we propose ID-based signcryption scheme and ID-based online/offline signcryption scheme where the confidentiality and authenticity are simultaneously required to enable a secure and trustable communication environment. To our best knowledge, this is the first ID-based online/offline signcryption scheme that can be proven secure in the standard model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.1-12
• /
• 2021

Technologies for an MVDC(medium voltage direct current) distribution system are being considered as an effective alternative to overcome the interconnection delay issues of PV systems. However, the implementation of a DC distribution system might lead to economic problems because of the development of DC devices. Therefore, this paper deals with the scale of a PV plant based on its capacity and proposes hosting-capacity models for PV systems to establish a network to evaluate the feasibility of an MVDC distribution system. The proposed models can be classified as AC and DC distribution systems by the power-supply method. PV systems with hundreds of MW, dozens of MW, and a few MW can be categorized as large-scale, medium-scale, and small-scale models, respectively. This paper also performed modeling for an economic evaluation of MVDC distribution system by considering both the cost of AC and DC network construction, converter replacement, operation, etc. The profit was composed of the SMP and REC rate of a PV plant. A simulation for economic evaluation was done for the MVDC distribution system using the present worth and equal-principal costs repayment method. The results confirmed that the proposed model is a useful tool to evaluate economic issues of a DC distribution system.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.89-94
• /
• 2021

The mechanical reliability of flexible devices has become a major concern on their commercialization, where the importance of reliable bonding is highlighted. In terms of component materials' properties, it is important to consider thermal damage of polymer substrates that occupy large area of the flexible device. Therefore, room temperature bonding process is highly advantageous for implementing flexible device assemblies with mechanical reliability. Conventional epoxy resins for the bonding still require curing at high temperatures. Even after the curing procedure, the bonding joint loses flexibility and exhibits poor fatigue durability. To solve this problems, low-temperature and adhesive-free bonding are required. In this work, we develop a room temperature bonding process for polymer substrates using carbon nanotube heated by microwave irradiations. After depositing multiple-wall carbon nanotubes (MWNTs) on PET polymer substrates, they are heated locally with by microwave while the entire bonding specimen maintains room temperature and the heating induces mechanical entanglement of CNT-PET. The room temperature bonding was conducted for a PET/CNT/PET specimen at 600 watt of microwave power for 10 seconds. Thickness of the CNT bonding joint was very thin that it obtains flexibility as well. In order to evaluate the mechanical reliability of the joint specimen, we performed lap shear test, three-point bending test, and dynamic bending test, and confirmed excellent joint strength, flexibility, and bending durability from each test.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.7-13
• /
• 2021

Various research has been done on fires and explosions at gas stations at home and abroad. However, only studies of off-site damage in the event of fire at the gas station were conducted, and research on fire at the auxiliary facilities in the gas station was insufficient. The gas station is a place where anyone can easily access dangerous goods. As the risk of fire increases due to the recent increase of auxiliary facilities such as convenience stores and car repair shops in gas stations, it is important to detect the effects of fire on the main oil refinery in case of fire and to verify the validity of existing regulations. In this thesis, we conducted a study to find out the effect of radiation heat on the separation between fixed and fixed oil reactors in the event of fire at an auxiliary facility. Simulation was modelled using FDS 5.5.3 Version, and the size of the fire source was configured with 13 fire assessment devices and the heat emission rate per unit area was entered. Simulation shows that the separation distance of 2 m does not secure the safety of the gas pump in the event of fire at the auxiliary facilities, and radiation heat does not damage at the separation distance of at least 4 m. Accordingly, facilities that can block radiant heat in the event of fire at auxiliary facilities, and measures to limit the use of auxiliary facilities or to re-impose the separation between buildings and fixtures will be needed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.537-542
• /
• 2022

There is a limit to the current indoor air quality (IAQ) monitoring method using fixed sensors and devices. A mobile robot for IAQ monitoring was developed by mounting IAQ monitoring sensors on a small multi-legged robot to minimize vibration and protect the sensors from vibration while robot moves. The developed mobile robot used a simple gait mechanism to enable the robot to move forward, backward, and turns only with the combination of forward and reverse rotation of the two DC motors. Due to the simple gait mechanism, not only IAQ data measurements but also gait motion control were processed using a single Arduino board. Because the mobile robot has small number of electronic components and low power consumption, a relatively low-capacity battery was mounted on the robot to reduce the weight of the battery. The weight of mobile robot is 1.4kg including links, various IAQ sensors, motors, and battery. The gait and turning speed of the mobile robot was measured at 3.75 cm/sec and 14.13 rad/sec. The maximum height where the robot leg could reach was 33 mm, but the mobile robot was able to overcome the bumps up to 24 mm.

• Journal of Broadcast Engineering
• /
• v.27 no.3
• /
• pp.378-390
• /
• 2022

With the recent development of deep composite multiplication neural network learning, deep learning techniques applied to single-image super-resolution have shown good results, and the strong expression ability of deep networks has enabled complex nonlinear mapping between low-resolution and high-resolution images. However, there are limitations in applying it to real-time or low-power devices with increasing parameters and computational amounts due to excessive use of composite multiplication neural networks. This paper uses blocks that extract hierarchical characteristics little by little using information distillation and suggests the Recursive Distillation Super Resolution Network (RDSRN), a lightweight network that improves performance by making more accurate high frequency components through high frequency residual purification blocks. It was confirmed that the proposed network restores images of similar quality compared to RDN, restores images 3.5 times faster with about 32 times fewer parameters and about 10 times less computation, and produces 0.16 dB better performance with about 2.2 times less parameters and 1.8 times faster processing time than the existing lightweight network CARN.

• Smart Media Journal
• /
• v.11 no.3
• /
• pp.39-53
• /
• 2022

Cloud of Things (CoT) can provide IoT applications with unlimited storage functions and processing power supported by cloud services. However, in a centralized cloud of things, it can create a single point of failure that can lead to bottleneck problems, outages of the CoT network. In this paper, to solve the problem of centralized cloud of things and interoperate between different service domains, we propose an IoT service interoperability system using distributed fog computing and blockchain technology. Distributed fog is used to provide real-time data processing and services in fog systems located at a geographically close distance to IoT devices, and to enable service interoperability between each fog using smart contracts and distributed ledgers of the blockchain. The proposed system provides services within a region close to the distributed fog entrusted with the service from the cloud, and it is possible to access the services of other fogs without going through the cloud even between fogs. In addition, by sharing a service right token issuance information between the cloud and fog nodes using a blockchain network, the integrity of the token can be guaranteed and reliable service interoperability between fog nodes can be performed.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.119-125
• /
• 2022

With the recent increase in dementia patients due to aging, measures to prevent their wandering behavior and disappearance are urgently needed. To solve this problem, various authentication methods and location detection techniques have been introduced, but the security problem of personal authentication and a system that can check indoor and outdoor overall was lacking. In order to solve this problem, various authentication methods and location detection techniques have been introduced, but it was difficult to find a system that can check the security problem of personal authentication and indoor/outdoor overall. In this study, we intend to propose a system that can identify personal authentication, basic health status, and overall location indoors and outdoors by using wristband-type wearable devices in a private blockchain environment. In this system, personal authentication uses ECG, which is difficult to forge and highly personally identifiable, Bluetooth beacon that is easy to use with low power, non-contact and automatic transmission and reception indoors, and DGPS that corrects the pseudorange error of GPS satellites outdoors. It is intended to detect wandering behavior and abnormal signs by locating the patient. Through this, it is intended to contribute to the prompt response and prevention of disappearance in case of wandering behavior and abnormal symptoms of dementia patients living at home or in nursing homes.

• (The) Research of the performance art and culture
• /
• no.43
• /
• pp.229-261
• /
• 2021

On the musical stage in 2019, there were many works depicting the Japanese colonial period. This is due to 2019 the timeliness of the March 1st Movement and the centennial of the establishment of the Provisional Government of the Republic of Korea. The way of remembering and commemorating historical facts reflects the power relationship between memory subjects and the time, namely the politics of memory. Until now, stage dramas dealing with the era of Japanese rule have focused on the commemoration of modern national and national defense, including feelings of misfortune and respect for patriots. This study analyzed the metaphor of the memorials emphasized to the audience in the commemorative musicals Shingheung Military School, Ku: Songs of the Goblin, and Watch which were performed in 2019, and looked at how to adjust memories and memorials. The above works highlight the narratives of ordinary people as well as those recorded against the backdrop of the Manchurian Independence Movement and Hongkou Park, expanding the object of the commemoration. Through this, active armed resistance efforts, self-reflection and reflection were highlighted. The case of Shingheung Military School revealed the earnestness of ordinary people who led the independence movement through the movement of central figures. Ku: Songs of the Goblin revises memories by reproducing forgotten objects and apologizing through time slip. Watch has strengthened the spectacles of facilities through documentary techniques such as photography, news reels, and newspaper articles, but it also reveals limitations limited to records. In the 3.1 Movement and the 100th anniversary of the establishment of the Provisional Government of the Republic of Korea, devices that actively reveal that the "people's movement" is connected to the present. To this end, the official records reflected the newly produced values and memories and devoted themselves to the daily lives and emotions of the crowd. In addition, both empirical consideration and calligraphy were utilized to increase reliability. These attempts are meaningful in that they have achieved the achievement of forming contemporary empathy.