• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.336-344
• /
• 2017

This paper presents the three-port DC-DC converter modeling and controller design procedure, which is part of the solid-state transformer (SST) to interface medium voltage AC grid to bipolar DC distribution network. Due to the high primary side DC link voltage, the proposed converter employs the three-level neutral point clamped (NPC) topology at the primary side and 2-two level half bridge circuits for each DC distribution network. For the proposed converter particular structure, this paper conducts modeling the three winding transformer and the power transfer between each port. A decoupling method is adopted to simplify the power transfer model. The voltage controller design procedure is presented. In addition, the output current sharing controller is employed for current balancing between the parallel-connected secondary output ports. The proposed circuit and controller performance are verified by experimental results using a 30 kW prototype SST system.

• 동력기계공학회지
• /
• 제6권2호
• /
• pp.18-23
• /
• 2002

Recently, as people pay attention to the environmental pollution, the emission of diesel engine has become a serious problem. Diesel Oxidation Catalysts(DOC) were experimentally investigated for the purification of pollutants exhaust emission from the diesel engine. In this study, the conversion efficiency of exhaust gas was investigated with various washcoat materials of the DOC. It was formed that CO conversion efficiency depended on temperature, but THC conversion was dominated by temperature and space velocity. Conversion efficiency of THC and CO increased with the addition of ZSM-5 in the washcoat, whereas these conversion efficiency decreased by adding Nd and Ba additives. $V_2O_5$ additive had the thermal stability for high temperature. Thermal durability of the catalyst was improved as increase of $V_2O_5$ additive.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.660-667
• /
• 2001

Power electronics plays an important role in providing an interface between fuel cells and loads. Furthermore, power electronic converters ensure that the power is reliably and efficiently delivered to the load in the required DC or AC form. In this paper, major types of fuel cells are presented. Basic structures, operating principles, and different applications of fuel cells are described. In addition, current status and future trends in the areas of power electronics for fuel cell applications are explained. A review of fuel cell power electronic system topologies and basic requirements are given as well.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.591-598
• /
• 2011

This paper investigates a power supply of medium voltage with enhanced ignition characteristics for plasma torches. A series resonant half-bridge topology is presented as a suitable ignition circuitry. The ignition circuitry is integrated into the main power conversion system of a multi-phase staggered three-level dc-dc converter with a diode front-end rectifier. A plasma torch rated at 3MW, 2kA and having a physical size of 1m is selected to be the high enthalpy source for a waste disposal system. The steady-state and transient operations of a plasma torch are simulated. The parameters of a Cassie-Mary arc model are calculated based on 3D magneto-hydrodynamic simulations. The circuit simulation waveform shows that the ripple of the arc current can be maintained within ${\pm}10%$ of its rated value under the presence of a load disturbance. This power conversion configuration provides a high enough ignition voltage, around 5KA, during the ignition phase and high arc stability under the existence of arc disturbance noise resulting in a high-performance plasma torch system.

• 한국산업정보학회논문지
• /
• 제16권4호
• /
• pp.1-7
• /
• 2011

본 논문에서는 수동형 RFID 시스템을 이용한 무선 전력 전송을 위해 910MHz 대역에서 동작하는 정류회로를 두 종류의 쇼트키 다이오드 HSMS_2822와 HSMS_2852를 사용하여 설계한 후 입력 전력, 부하 저항에 따른 출력 전압을 측정하여 RF-DC 변환 효율을 비교 분석하였다. 입력 전력이 -20~17dBm에서 HSMS_2822를 사용했을 때보다 HSMS_2852를 사용한 경우 변환 효율이 더 높게 나타났다. 제작된 정류회로와 다이폴 안테나를 이용하여 RFID 리더기가 동작할 때 거리에 따른 수선되는 전압과 전류를 측정하였으며, 50cm 떨어진 거리에서 2.5V의 전압과 5.75mA의 전류가 측정되었다.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.211-219
• /
• 2014

This paper proposes a low voltage high current LLC resonant converter for Green PC. Green PC is composed of a lot of blade PCs, and it is a centralized system to manage them in computer center. Green PC should require that its power supplies have several characteristics such as low output voltage, high output current, and high power conversion efficiency. Conventional PSFB (Phase Shift Full Bridge) converter is usually used as DC/DC converter for computer power supply because it has high power conversion efficiency thanks to ZVS (Zero Voltage Switching) operation under middle and high load conditions. However, this converter has some problems such as large switching noise and limitation of ZVS operation under light load condition. In order to improve the performance of power supply for Green PC, a new power supply using popular high efficiency LLC resonant converter for low voltage and high current application is proposed in this paper. The proposed power supply has ZVS capability over the entire load range, thus resulting in good efficiency and high switching frequency. Experimental results verify the performance of the proposed power supply for Green PC using 2[kW] (19[V], 105[A]) rated prototype converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.13-14
• /
• 2011

The power conversion converter for driving the wireless power transfer system is can be into the two part of the DC power conversion rectifier and the high frequency dc-ac power conversion inverter. In this paper, The operating characteristics of the Class-${\Phi}_2$ resonant inverter have been investigated through by simulation and by experiment. It can be switched at a high frequency without the switching losses and the harmonics are reduced effectively due to the input LC filter. Its switching frequency is 1MHz and the input voltage is 96V which is the output voltage of LLC resonant converter. And its output peak voltage is 170V. The resonant inverter module operated at the commercial power source of 220V was built. And also the electromagnetic coupled resonance coils were designed for wireless power transfer with a 1MHz operating frequency. As a experimental result, the wireless power transmission was confirmed and it is varified the validity of the experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.121-126
• /
• 2013

교류기기의 속도 및 토크 제어시스템에서 전력변환장치로 사용되는 싸이클로컨버터는 저속에서 토크가 크고 제어가 간단한 장점을 가지고 있다. 또한, 정류기, 직류링크부, 인버터가 설치되지 않으므로 시스템이 간단하고 대전력 시스템에 적합하다. 현재 사용되고 있는 대형선박의 추진전동기의 구동용 전력변환장치를 싸이클로컨버터로 변경하면 시스템이 간단해지므로 설치비용을 크게 감소시킬 수 있다. 하지만 기존의 싸이클로컨버터는 전력 반도체소자의 고속 스위칭에 의한 손실이 크고 출력 전압파형이 왜곡되어서 고조파 성분이 증가하게 된다. 본 논문에서는 이러한 단점을 개선하기 위해서 1차측에 위상이 다른 2개의 입력단과 2차측에 1개의 출력단으로 구성되는 상천이 필터를 설치한다. 위상이 다른 2개의 전압파형이 더해져서 2차측으로 변압됨으로써 전압파형이 정현파에 가깝게 출력된다. 그로 인해 추진전동기에 입력되는 전압파형이 개선되고 총고조파왜형율도 크게 감소한다.

• 신재생에너지
• /
• 제6권3호
• /
• pp.22-29
• /
• 2010

The concept of Ocean Thermal Energy Conversion (OTEC) is simple and various types of OTEC have been proposed and tried. However the location of OTEC is limited because OTEC requires $20^{\circ}C$ of temperature difference as a minimum, so most of OTEC plants were constructed and experimented in tropical oceans. To solve this we proposed the modified OTEC which uses condenser discharged thermal energy of existing fossil or nuclear power plants. We call this system CTEC (Condenser Thermal Energy Conversion) as this system directly uses $32^{\circ}C$ partially saturated steam in condenser instead of $20{\sim}25^{\circ}C$ surface sea water as heat source. Increased temperature difference can improve thermal efficiency of Rankine cycle, but CTEC should be located near existing plant condenser and the length of cold water pipe between CTEC and deep cold sea water also increase. So friction loss also increases. Calculated result shows the change of efficiency, pumping power, net power and other parameters of modeled 7.9 MW CTEC at given condition. The calculated efficiency of CTEC is little larger than that of typical OTEC as expected. By proper location and optimization, CTEC could be considered another competitive renewable energy system.

• 한국항해항만학회지
• /
• 제42권1호
• /
• pp.9-16
• /
• 2018

인류의 한정된 석유자원의 개발은 유가의 상승과 함께 필연적으로 심해지역의 유전을 탐사하고 개발하고 있다. 이러한 심해지역에는 심층수의 온도가 약 $4^{\circ}C$이고 표층수의 온도는 약 $30^{\circ}C$로 이때의 온도 차이를 이용하여 발전설비를 가동하는 Ocean Thermal Energy Conversion(OTEC) 기술에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 기존의 심해지역에 설치되는 FPSO(Floating Production Storage Offloading; 부유식 생산설비)에서 수심 100m의 해수를 냉각수로 이용하는 조건을 400m까지 변경하는 조건으로 하고, FPSO에서 냉각수로 사용되고 배출되는 해수를 이용하여 Discharged Thermal Energy Conversion(DTEC) 발전장치를 적용하는 방안을 설계하고 해석하였다. 기존의 설계 수심보다 깊은 수심에서 냉각수를 취수하여 DTEC 시스템을 적용하면 수심에 따라 보다 많은 전력을 생산할 수 있는 시스템의 설계가 가능한 것을 확인하였다. FPSO와 OTEC 발전설비의 유사성을 고려하였을 때, 심해지역의 FPSO에 DTEC 시스템을 적용하여 기술을 축적하고 유전의 수명이 다한 뒤에 OTEC 발전설비로 개조한다면 자원개발과 지속가능한 발전이라는 두 가지 중요한 과제를 이룰 수 있을 것이다.