• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1027-1035
• /
• 2014

휴대용 기기에서 가장 중요한 설계 요소는 소비 전력이다. 본 논문에서는 휴대용 온습도 측정기 설계 초기에 전력 소비 모델을 제시하고, 제시된 모델에 입각해 휴대용 온습도 측정기의 소비 전력을 설계한다. 이렇게 설계된 휴대용 온습도 측정기의 소비 전력을 사전 검증함으로써 제품 구현 전에 설계 검증을 완료하기 위한 전력 소비 설계 모델링 방안을 제시하고자 한다. 한편, 대기 모드에서 소비 전류를 효과적으로 감소시키기 위한 전력 소비 설계 개선 방안도 제시한다. 휴대용 온습도 측정기 구현을 통해 전력 소비 모델링에 입각한 설계 방법론의 타당성을 확인할 것이다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.765-781
• /
• 2019

This study predicts the power consumption of an Electric Propulsion Ship (EPS) in marine environment. The EPS is driven by a propeller rotated by a propulsion motor, and the power consumption of the propeller changes by the marine environment. The propulsion motor consumes the highest percentage of the ships' total power. Therefore, it is necessary to predict the power consumption and determine the power generation capacity and the propeller capacity to design an efficient EPS. This study constructs a power estimation simulator for EPS by using a ship motion model including marine environment and an electric power consumption model. The usage factor that represents the relationship between power consumption and propulsion is applied to the simulator for power prediction. Four marine environment scenarios are set up and the power consumed by the propeller to maintain a constant ship speed according to the marine environment is predicted in each scenario.

• 정보통신설비학회논문지
• /
• 제10권1호
• /
• pp.33-39
• /
• 2011

This paper considers a performance analysis of set-top box (STB) power saving schemes. STB converts the signal into content which is then displayed on the television (TV) screen, and there are typically two operation modes: on mode and stand-by mode. The total energy consumption (TEC), a typical measure of power consumption of STB, is defined by the sum of power consumption in each mode. Recently there are some works of STB power saving schemes that transit STB operation modes efficiently, and the mode transition time point of those schemes can be different. Thus it is required to develop a performance evaluation method that reflects mode transition time points of each scheme to get TEC correctly. This paper proposes a performance evaluation method for STB power consumption using Poisson process to consider the mode transition time point. By modeling STB mode transitions as events of Poisson process, the average time duration of STB mode is computed and accordingly the effect of power saving is evaluated. The performance evaluation result shows that the proposed method achieves 1 to 19% improvement in power consumption compared with a conventional performance evaluation method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.231-233
• /
• 2005

For the low-power design of the mobile multimedia system architecture, this paper modeling the mobile multimedia system and analysis the power consumption profile about the whole communication environment. The mobile system model consist of air interface, RIP front-end, base-band processing module and human interface. For the result of power consumption profile analysis, the power consumption of multimedia processing is above 60% compare to the whole power consumption in mobile multimedia system. To minimize the power consumption in processing module which consumes the large power, this paper proposed the Microscopic DVS technique which applies the optimum voltage for the each multimedia frame. For the simulation result, proposed power minimization technique reduce the power consumption about 30%.

• 정보보호학회논문지
• /
• 제27권4호
• /
• pp.961-970
• /
• 2017

차분전력분석공격은 추측하는 비밀 정보 값에 따라 계산한 중간 값을 전력 소비 모델에 대입하여 전력 소비량을 구한 후 실제 발생한 전력 소비량과 함께 분석하여 암호화에 쓰인 비밀 정보 값을 복원한다. 이 때 흔히 쓰이는 전력 소비 모델로는 해밍 웨이트 모델이나 해밍 디스턴스 모델이 있으며 좀 더 정확한 전력 소비 모델을 구하기 위해서 전력 모델링 기법을 이용한다. 하지만 공격 타켓이 되는 장비가 가정한 전력 소비 모델과 상이한 경우 중간 값에 해당하는 전력 소비량을 옳게 반영하지 못하는 문제가 발생한다. 본 논문에서는 실제 공격 장비에서 측정한 소비 전력을 테이블 형태로 저장하여 전력 소비 모델로써 이용하는 방법을 제안한다. 제안하는 방법은 암호화 과정에서 활용 가능한 정보(평문, 암호문 등)가 쓰이는 시점에서의 소비 전력을 이용한다. 이 방법은 사전에 탬플릿 구성을 할 필요가 없으며 실제 공격 장비에서 측정한 소비 전력을 이용하기 때문에 해당 장비의 소비 전력 모델을 정확하게 반영한다. 제안하는 방법의 성능을 확인하기 위해 시뮬레이션과 실험을 진행하였으며 제안하는 방법의 성능이 기존의 전력 모델링 기법보다 부채널 공격 성능이 향상됨을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.49-50
• /
• 2015

Piezoelectric elements are one of good candidates able to replace motors in various electronics devices. It is slim and compact and low power consumption compare to motors. Linear regulator or class-D amplifier are generally used for piezoelectric element driver, however, suffers from severe power consumption. In this paper, electrical modeling of piezoelectric element will be presented and switching losses on the driver due to the parasitic capacitance will be analyzed. And new ZVS full bridge converter with an inductor will be proposed so as to reduce the power losses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.218-219
• /
• 2006

This paper is about modeling on 1500V DC electric railroad system. Electric railroad systems have peculiar characteristics against other electric system. The characteristics arc that the railroad systems have electric vehicle loads which are power-varying and location-varying with time. Because of this load characteristic, the electric railroad system modeling which reflects its own characteristics on EMTDC simulation could not be achieved. However, to reflect load characteristic on EMTDC, this paper suggests electric railroad system modeling by using TPS (Train Performance Simulator) that was developed in Korea Railroad Research Institute. A TPS program has various kinds of input data, such as operation condition, vehicle condition, and power system condition. By these data, TPS calculates mechanical power consumption and location, especially it decide electric power consumption on the basis of the fact that consumed electric and mechanical power are equal. Moreover, on this paper, movement of vehicle is reflected on EMTDC simulation as variation of feeder impedance. Also, an electric vehicle load is modeled as time-varying constant power load model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.377-382
• /
• 2004

This paper presents a novel optimization method for the air- and gas-supplying network comprised of several air compression systems and air and gas streams in an industrial chemical plant. The optimization is based on the hybrid model developed by Han and $Han^1$ for predicting the power consumption of a compression system. A constrained optimization problem was formulated to minimize the total electric power consumption of all the compression systems in the air- and gas-supplying network under various operating constraints and was solved using a successive quadratic optimization algorithm. The optimization approach was applied to an industrial terephthalic acid manufacturing plant to achieve about 10% reduction in the total electric power consumption under varying ambient conditions.

• 전자공학회논문지CI
• /
• 제43권5호
• /
• pp.1-7
• /
• 2006

본 논문에서는 임베디드 시스템에서 사용되는 대표적 저전력 마이크로컨트롤러인 ATmega128을 대상으로 명령어 레벨의 소모전류를 측정, 모델링하였다. 마이크로컨트롤러가 소모하는 전류는 메모리의 접근 유무에 의해 차이가 나며, 메모리 접근 명령어가 메모리 비접근 명령어에 비해 내부 메모리 기준으로 17% 더 높은 전류소모를 나타낸다. 프로그램의 메모리 접근 명령어 사용빈도가 높을수록, 메모리 계층구조에서 낮은 계층의 정보를 접근할수록 프로그램의 전력소모는 비례한다고 관찰된다. 본 논문에서는 명령어 레벨의 소모전류모델화를 통하여 실제 프로그램의 전력소모를 예측, 분석하고 메모리 접근 명령어의 비율을 줄이는 방향으로 프로그램의 전력소모를 최적화한다. 또한 마이크로컨트롤러 기반 시스템에서 프로그램 실행 전력을 최적화할 수 있는 기법을 하드웨어와 소프트웨어 측면에서 다양하게 제안한다.

• 정보통신설비학회논문지
• /
• 제10권4호
• /
• pp.135-142
• /
• 2011

This paper proposes a performance evaluation method for power consumption of set-top box (STB) stand-by mode transition schemes. A stand-by mode transition scheme characterizes the timing of mode transition. The timing of mode transition affects the duration of stand-by mode operation, and the power consumptions of STB as well. Recently a fast stand-by mode transition scheme (FMT) has been proposed based on user input for selecting the device to be connected to TV. In this paper, we evaluate power consumption of FMT and a conventional mode transition scheme. For the computation of the duration of stand-by mode operation, the user input events are modeled as Poisson process. Simulation results based on the modeling reveals that the proposed scheme is more effective in power saving than the conventional scheme by up to 30%.