• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.113-114
• /
• 2006

In this paper, dual-gate mixer has been designed and optimized to have variable conversion gain for WiBro and WLAN applications and to save power. With the LO power of 0dBm and RF power of -50dBm, the mixer shows 15dB conversion gain. When RF power increases from -50dBm to -20dBm, the conversion gain decreases to -2dB with bias change. The variable conversion gain can reduce the high dynamic range requirement of AGC burden at IF stage. Also, it can save the dc power dissipation of mixer up to 90%.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.660-666
• /
• 2010

This paper presents the approach followed to develop a course that introduces reliability into the design of power electronics converters. The course is part of the curriculum of a master of science in electrical engineering program, and it is aimed at providing reliability tools that can be used in a straightforward manner, while avoiding the mathematical intricacies. The reliability calculations are performed according to the Military Handbook 217, using the evaluation version of a commercial software package which greatly reduces the computational burden usually associated with this task. The course assessment shows that, after attending the course, students were able to improve the mean time between failures in a power-electronics converter, from a minimum of 5%, up to 100%.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (C)
• /
• pp.253-255
• /
• 2003

Electricity is the prime commodity in mobile device, e.g. smart phone, PDA, MP3 player and etc. This strict restriction on power consumption requirement of the mobile device puts unique demand in designing hardware and software components of the device. In this paper, we address the issue of minimizing the power consumption in retrieving the continuous media data from the disk drive for real-time playback purpose. Different from the legacy text based data, real-time multimedia playback requires that the storage supplies the data block continuous fashion. This may put immense burden on the power scarce environment since the disk Is required to be active for the entire playback duration. We develop elaborate algorithm which carefully analyzes the power consumption profile of the disk drive and which establishes the data retrieval schedule for the given playback. It computes the amount of data blocks to read, the length of active and standby period. According to our simulation result, the ARM algorithm exhibits superior performance in continuous media retrieval from the aspect of power consumption to legacy playback scheme.

• 전기학회논문지P
• /
• 제58권1호
• /
• pp.79-84
• /
• 2009

In order to increase the capacity of the superconducting fault current limiter(SFCL), the current and voltage grades of the SFCL must be increased. As a method for the increase of the current and voltage grades of the SFCL, we compared the various characteristics between the flux-lock type SFCL "With three superconducting units connected in series and the transformer type SFCL using the transformer with three secondary circuits. One of three superconducting units had not quenched in the flux-lock type SFCL. Therefore, the unbalanced power burden happened because of the voltage difference generated by unbalanced quenching between the superconducting units. In the meantime, the three superconducting units were all quenched in the transformer type SFCL using the transformer, and the voltage difference generated between the superconducting units was decreased. Therefore, the difference of critical characteristics was complemented by distribution of fault current in accordance with the turn's ratio between primary and secondary windings. The unbalanced power burden of the superconducting units was reduced due to flux-share between the superconducting units in the transformer. In conclusion, the capacity increment of the SFCL using a transformer was easier due to equal distribution of voltages generated by simultaneous quench of the superconducting units. We think that the characteristics is improved more because of the decrease of saturation in the iron core if the secondary winding is increased in the SFCL using the transformer.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권6호
• /
• pp.255-258
• /
• 2006

We investigated the operating characteristics of the hybrid-type superconducting fault current limiter (SFCL) according to the inductance of secondary windings. The hybrid type SFCL consists of a transformer that has a primary winding and a secondary winding with serially connected $YBa_2Cu_3O_7$ (YBCO) films. The resistive-type SFCL has difficulty when it comes to raising the capacity of the SFCL due to slight differences of critical current densities between units and structure of the SFCL. The hybrid-type SFCL with closed-loop is able to achieve capacity increase through the electrical isolation and reduction of the inductance of the secondary winding with a superconducting element of the same critical current. On the other hand, the current limiting characteristics were nearly identical in the hybrid-type SFCL with open-loop compared to closed-loop, but quench time was longer than the hybrid-type SFCL with closed-loop. We confirmed that the capacity of the SFCL was increased effectively by the reduced inductance of the secondary winding. In addition, the power burden of the system also could be lowered by reducing the inductance of secondary winding.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.329-336
• /
• 2008

본 논문은 전동 휠체어 시스템에서 반 자율주행 및 안전 주행, 장애물 회피를 위한 퍼지 신경망 제어 주행 시스템을 제안, 디자인 및 임베디드 리눅스 시스템을 통해 구현하고 검증한다. 자율주행 장애물 검출 알고리즘을 위해 거리측정 센서를 통해 장애물의 크기를 파악하고 회피할 수 있는 폭과 각도, 거리 및 속도를 계산하여 계획된 경로대로 이동할 수 있는 알고리즘을 구현한다. 또한 거리측정 센서를 최소화하기 위해 휠체어 앞쪽에 2개의 스텝모터를 통해 거리측정 센서를 좌우로 움직이면서 패닝 스캔을 한다. 퍼지 신경망 제어 주행 시스템은 센서 스캐닝을 통한 맵 데이터를 분석하고 주행 알고리즘에 따른 자율 주행 경로를 설정한다. 정해진 자율 주행 경로는 퍼지 신경망 제어 주행시스템을 통해 전등 휠체어 컨트롤 주행을 제어 운용한다. 그리고 보호자를 위한 전동 휠체어 보호자 트래킹 알고리즘을 구현한다. 본 시스템은 장애인 및 움직임이 불편한 노인을 위한 반 자동 전동휠체어 시스템을 구축하여 안전하게 사용자가 운용할 수 있게 한다.

• 전력전자학회논문지
• /
• 제16권3호
• /
• pp.209-218
• /
• 2011

연료전지와 같은 저전압 대전류 응용에는 입력전류 리플이 작고 변압기의 턴비가 작은 전류원 DC-DC 컨버터가 더 효과적이다. 5kW급 이상의 응용에서는 기존의 단상을 기본으로 하는 전류원 풀브리지, 하프브리지 또는 푸시풀 의 토폴로지로는 스위치등 소자의 전류부담이 크고 소자의 선정 및 최적설계가 용이하지 않다. 본 논문에서는 대전력 고승압 응용에 적합한 능동 클램프방식의 3상 전류원 푸쉬풀 DC-DC 컨버터를 제안한다. 제안한 컨버터는 소자의 전류부담이 작고 전 영역(0～1)의 듀티 사용으로 입력전압 변동이 큰 응용에 적합하다. 3상 고주파변압기를 비롯한 주요부품의 설계방법을 제시하고 5kW급의 시작품으로부터 제안한 컨버터의 타당성 및 성능을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.47-50
• /
• 2003

For large-scale systems which are composed of interconnections of many lower-dimensional subsystems, decentralized control is preferable since it can alleviate the computational burden, avoid communication between different subsystems, and make the control more feasible and simpler. A power system is such a large-scale system where generators are interconnected through transmission lines. Decentralized control is therefore considered for power systems. In this paper, a robust decentralized excitation control scheme for interactions is proposed to enhance the transient stability of multimachine power systems. First we employ a DFL(Direct Feedback Linearization) compensator to rancel most of the nonlinearities; however, the resulting model still contains nonlinear interconnections. Therefore, we design a robust controller in order to deal with Interconnection terms. In this procedure, an upper bound of interconnection terms is estimated by an estimator. The resulting adaptive scheme guarantees the uniform ultimate boundedness of the closed-loop dynamic systems in the presence of the uncertainties.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.399-405
• /
• 2014

For stable integration of large-scale wind farms, integration standards (Grid codes) have been proposed by the system operator. In particular, voltage control of large-scale wind farms is gradually becoming important because of the increasing size of individual wind farms. Among the various voltage control methods, Secondary Voltage Control (SVC) is a method that can control the reactive power reserve of a control area uniformly. This paper proposes hybrid SVC when a large-scale wind farm is integrated into the power grid. Using SVC, the burden of a wind turbine converter for generating reactive power can be reduced. To prove the effectiveness of the proposed strategy, a simulation study is carried out for the Jeju system. The proposed strategy can improve the voltage conditions and reactive power reserve with this hybrid SVC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.731-734
• /
• 2003

In present, most of metallic structures(gas pipeline, oil pipeline, water pipeline, etc) are running parallel with subway and power line in seoul. Moreover subway system and power line make a stray current due to electrical corrosion on metallic structures. The owner of metallic structures has a burden of responsibility for the protection of corrosion and the prevention against big accident such as gas explosion or soil pollution and so on. So, they have to measure and analyze the data about P/S(Pipe to Soil) potential, amplitude of stray current, point of source of stray current and so. In this paper, results of development about data logger apparatus for measurement stray current of subway and power line are presented.