Operating Characteristics of Hybrid Type Superconducting Fault Current Limiter

하이브리드형 초전도 한류기의 동작 특성

  • 조용선 (조선대 공대 전기공학과) ;
  • 남긍현 (조선대 공대 전기공학과) ;
  • 임성훈 (숭실대 공대 전기공학과) ;
  • 최효상 (조선대 공대 전기공학과)
  • Published : 2006.06.01

Abstract

We investigated the operating characteristics of the hybrid-type superconducting fault current limiter (SFCL) according to the inductance of secondary windings. The hybrid type SFCL consists of a transformer that has a primary winding and a secondary winding with serially connected $YBa_2Cu_3O_7$ (YBCO) films. The resistive-type SFCL has difficulty when it comes to raising the capacity of the SFCL due to slight differences of critical current densities between units and structure of the SFCL. The hybrid-type SFCL with closed-loop is able to achieve capacity increase through the electrical isolation and reduction of the inductance of the secondary winding with a superconducting element of the same critical current. On the other hand, the current limiting characteristics were nearly identical in the hybrid-type SFCL with open-loop compared to closed-loop, but quench time was longer than the hybrid-type SFCL with closed-loop. We confirmed that the capacity of the SFCL was increased effectively by the reduced inductance of the secondary winding. In addition, the power burden of the system also could be lowered by reducing the inductance of secondary winding.

Keywords

References

  1. W. Paul, M. Chen, M. Lakner, J. Rhyner, D. Braun, W. lanz, 'Fault current limiter based on high temperature superconductors different concepts, test results, simulations, applications', Physica C, Vol. 354, No. 1-4, pp. 27-33, May 200l https://doi.org/10.1016/S0921-4534(01)00018-1
  2. Yu Jiang, Shi Dongyuan, Duan Xianzhong, Tang Yuejin and Cheng Shijie, 'Comparison of superconducting fault current limiter in power system', IEEE Power Engineering Society Summer Meeting, Vol. 1, pp. 43-47, 2001 https://doi.org/10.1109/PESS.2001.969980
  3. M. Yamaguchi, S. Fukui, T. Satoh, Y. Kaburaki, T. Horikawa and T. Honjo, 'Performance of DC reactor type fault current limiter using high superconducting coil', IEEE Trans. Appl. Superco-nd., Vol. 9, No. 2, pp. 940-943, Jun. 1999 https://doi.org/10.1109/77.783452
  4. Sung-Hun Lim, Hyo-Sang Choi and Byoung-Sung Han, 'Operational characteristics of flux-lock-type high - T/sub c/superconducting Fault Current Limiter with a Tap changer', IEEE trans. Appl. Supercond., Vol. 14, No. 1, pp. 82-86, Mar. 2004 https://doi.org/10.1109/TASC.2004.824344
  5. Hyo-Sang Choi, Hye-Rim Kim and Ok-Bae Hyun, 'Operating properties of superconducting fault limiters ?based on YBCO thin films', Cryogenic, Vol. 41, No. 3, pp. 163-167, Mar. 2001 https://doi.org/10.1016/S0011-2275(01)00064-9
  6. Hyo-Sang Choi, Ok-Bae Hyun, Hye-Rim Kim and Kwon-Bae Park, 'Switching properties of a hybrid type superconducting fault current limiter using YBCO stripes', IEEE trans. Appl, Supercond., Vol. 14, No. 3, Sep. 2002 https://doi.org/10.1109/TASC.2002.801816