• 제목/요약/키워드: Power boat

검색결과 105건 처리시간 0.029초

소형 어선용 주기구동 유압식 고주파수 발전장치에 관한 연구 ( 1 ) - 유압펌프 제어방식 - (Hydraulic Constant Frequency Generation System Driven by Main Engine for Small Fishing Boat - Hydraulic Pump Control Type -)

  • 이일영;박상길;정용길
    • 수산해양기술연구
    • /
    • 제24권1호
    • /
    • pp.30-35
    • /
    • 1988
  • An electrical power generation system driven by main engine shaft, briefly SG system for middle or small size fishing boat is studied experimently. In the SG system, power transmission is performed by a variable displacement hydraulic pump driven by the main engine and a constant displacement hydraulic motor. It was verified that the SG system enabled the generation of electrical power with constant frequency regardless main engine speed. In the SG system, setting reference frequency, sensing generator output frequency and setting controller parameters are performed by performed by programming in a microcomputer, so a countermeasure for physical situations of control object is very easy. Futhermore, the SG system has following features; low initial installation cost, wide freedom of installation in engine room, advantage of application in existing ships, especially fishing boat with hydraulic fishing equipments.

  • PDF

전산 유체 해석을 이용한 어선의 속도 성능 추정 (Prediction of fishing boat performance using computational fluid dynamics)

  • 김인섭;박동우;이상봉
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권7호
    • /
    • pp.574-579
    • /
    • 2016
  • 기존의 연구에서 저항 성능을 정도 높게 추정하던 격자 시스템은 모형선의 길이 6-8m, 동적 트림 ${\pm}1^{\circ}$ 이하인 일반 대형 상선에 최적화되어 있다. 이러한 격자 시스템을 소형 어선과 같이 프루드 수 0.3~0.8, 동적 트림이 ${\pm}3^{\circ}$ 이상인 대상선에 적용할 경우 수치적 불안정성을 야기한다. 본 연구에서는 이러한 문제를 해결하기 위해 부심으로부터 입구 경계 조건의 길이를 줄이고, 자유수면의 각도에 따라 밀집된 격자 형태를 갖는 격자 시스템을 구성하였다. 상기 격자 시스템을 이용하여 설계 흘수와 밸러스트 흘수에서 다양한 선속에 대해 어선에 작용하는 저항을 수치 해석으로 계산하였으며, ITTC-1978 2차원 해석법을 이용하여 소형 어선의 유효마력을 추정하였다. 준추진효율 계수는 기존의 모형시험 자료를 활용하였으며, 설계 흘수에서 제동마력 추정을 통해 속도 성능을 평가하였다.

소형선망어업 시험선 운영의 경제성 평가에 관한 연구 (A Study on the Alternatives Evaluation of the Fishing Boat in the Small Powered Purse Seine)

  • 이승우
    • 수산경영론집
    • /
    • 제29권2호
    • /
    • pp.163-175
    • /
    • 1998
  • The decrease of the fishery's business performance is due to the changes of environment-the increase of cost, the reduction of resources, the liberalization of import, the effectuation of the admiralty law Though the government has prepared the alternative policy to strengthen the competitive power of the fishery, fishermen should draw up a plan to improve the business performance. The problems of the small powered purse seine resulting from the small scale of the fishing boat is following. First, its catching activity in the sea is riskful. Second, the space to eat and to work is not enough. Third, the space to put the fish is not enough, it is hard to maintain the freshness of the fish. Therefore it is necessary to solve these problems for the scale of the fishing boat to have to be enlarged. The enlargement of the fishing boat to be required much expenditure of fund is the important investment decision to fishermen. The alternatives evaluation between the existing boat(defender) and the new boat enlarged with the new equipment(challenger) is necessary process to reduce the uncertainty of investment. The profitability of the challenger is better than that of defender due to the reduction of cost and the increase of revenue. Because the net present value of incremental cash flow is positive, it is rational for fishermen to accept the challenger.

  • PDF

소형 어선용 이중강판 방향타의 유체역학적 특성 조사 (Investigation on the Hydrodynamic Characteristics of Double Plate Steel Rudder for Small Fishing Boat)

  • 안남현;박희승
    • 동력기계공학회지
    • /
    • 제16권6호
    • /
    • pp.24-29
    • /
    • 2012
  • In this study, the numerical simulation has been performed to investigate the hydrodynamic evaluation between double plate steel rudder and newly designed foil type rudder for small fishing boat. The simulations are carried out in 2 speed ranges with 7 variations of flow's angle of attack which is at intervals of about 5 degree respectively. As the well-known commercial code, FLUENT and CATIA are used as the solver. The simulation results show that new designed foil type rudder is better than conventional double plate rudder in terms of Lift and Drag of running boat in the water.

항내 예선의 적정규모 결정에 관하여 (On Determining the Optimal Amount of Barbour Tagboat)

  • 박창호;우병구;이철영
    • 한국항만학회지
    • /
    • 제2권1호
    • /
    • pp.75-106
    • /
    • 1988
  • As port transport system consists of subsystems such as navigation system, cargo handling system, storage system, inland transport system, and Management and Information system, the productivity of this system is determined by the minimum level of subsystem. From the viewpoint of elaborating the efficiency of integrated system, it is valuable to determine the optimal level of harbour tug boat which is the most important factor of navigation system. This paper treats the optimal amount of harbour tug boat by simulation, and applied to Pusan port. In the course of simulation, an emperical formula is introduced for determining the Horse Power (HP) of tug boat by the ship's gross tonnage (G/T) refering to the cases of various ports of other countries, that is ; $Y=9.96X^{0.6}+569$. X : The gross tonnage of vessel (G/T). Y : The Horse Power (HP) of tug boat. The results of the simulation are summarized as follows ; 1) In 1987, three or four low-powered harbour tug boats, five mid-powered harbour tug boats and four high-powered harbour tug boats are necessary in the mean level. But, five or seven low-powered harbour tug boats, ten mid-powered harbour tug boats and eight high-powered harbour tug boats are necessary lest delay should occur at all. 2) In 1992, 1lee or four low-powered harbour tug boats, six mid-powered harbour tug boats and seven high-powered harbour tug boats are estimated and be necessary in the mean level.

  • PDF

레저보트 조종시뮬레이터 개념설계에 관한 연구 (A Study for the Conceptual Design of a Small Leisure Boat Handling Simulator)

  • 강남선;윤현규
    • 한국시뮬레이션학회논문지
    • /
    • 제22권4호
    • /
    • pp.99-107
    • /
    • 2013
  • 본 논문에서는 조종이 미숙한 일반인을 위한 모의운전장치로서 보트 운항능력 확보를 위한 레저보트 시뮬레이터 개념설계에 관한 연구를 수행하였다. 레저보트 조종시뮬레이터 요구조건을 도출하기 위하여 국내 외 해양레저산업의 현황을 분석하고 레저보트와 관련된 사고유형과 국내 해양레저관련 제도와 법규에 대하여 분석하였다. 레저보트 보유현황을 기반으로 20 ft 및 40 ft급 파워보트를 개발대상 선박으로 선정하였으며, 실제 레저보트의 운항환경과 동일한 환경을 구현하여 훈련의 집중도와 현실감을 최대화 할 수 있도록 레저보트 시뮬레이터를 설계하였다. 특히, 레저보트의 운항특성 및 운동특성을 보다 정확히 구현하기 위하여 선박의 형상특성과 해상상태가 반영된 파워보트의 6자유도 운동 수학모형을 개발하여서, 파도 바람 조류 등 외란 중 운동을 재현하는 조종자용 6자유도 모션플랫폼을 적용하여 훈련의 현실감을 극대화 할 수 있도록 레저보트 시뮬레이터를 설계하였다. 조종면허, 조종숙련도 향상을 위하여 국내 조종면허제도와 수상레저안전법, 해상교통안전법 등을 분석하여 교육 시나리오를 설계하였다.

선형설계를 통한 G/T 29톤급 근해채낚기 어선의 저항성능 개선 (Improvement of the Resistance Performance for a G/T 29ton Class Coastal Angling Fishing Boat based on Hull-form Design)

  • 하윤진;이영길;이승희;김상현;유진원;백영수;배동균
    • 대한조선학회논문집
    • /
    • 제51권6호
    • /
    • pp.521-529
    • /
    • 2014
  • In this study, numerical simulations and model tests are performed for the hull-form development of a G/T 29ton class coastal angling fishing boat. The numerical simulations are mainly used for the design of bow hull-form and the resistance performance is improved by the adoption of high bulbous bow. And, the resistance performances of the existing boat and the designed boat are verified by the model tests. The results of the experiments and calculations show that the effective power of the designed boat is 13.6% less than that of the existing boat at design speed. Therefore, the results of this research could be used as one of the fundamental data for the design of G/T 29ton class coastal angling fishing boat.

1인승 소형 보트 설계 및 속도성능 분석 (An Analysis on the Design and Speed Performance of a One-man Boat)

  • 박동우;박경민
    • 해양환경안전학회지
    • /
    • 제20권5호
    • /
    • pp.552-557
    • /
    • 2014
  • 본 연구의 목적은 1인승 보트를 설계 제작하여 시운전 및 전산유체역학(CFD)를 이용하여 속도성능을 분석하는 것이다. 선형설계를 포함한 보트의 전반적인 설계과정을 설명하였고, 설계를 바탕으로 제작된 보트에 대하여 잠잠한 해상에서 시운전을 수행했다. 시운전을 통해 보트의 설계속도에서 제동마력은 1680 W가 계측하였다. 유동해석은 상용 CFD 코드인 STAR-CCM+를 이용하여 자유수면과 동적트림을 고려하여 수행되었다. 유동해석 결과 잉여저항 성분이 마찰저항 성분에 비해 크게 나타나는 것을 확인할 수 있었다. 시운전과 CFD 결과를 바탕으로 보트의 전체효율계수를 추정하였다. 전체효율계수는 전달효율과 준 추진효율로 나누었다. 준 추진효율은 동일 프로펠러를 사용하는 솔라보트의 속도성능 추정 시 사용될 수 있다. 연구결과은 향후 개발될 보트의 선형설계, 성능분석 및 개발에 정보를 제공할 수 있다.

소형 어선에서 전자자기 컴퍼스를 이용한 항행자동시스템의 실용화에 관한 기초적 연구 (A Basic Study for Utilization of Autopilot System Using Electromagnetic Compass in a Small Fishing Boat)

  • 조현정;이유원
    • 수산해양기술연구
    • /
    • 제40권1호
    • /
    • pp.54-59
    • /
    • 2004
  • 최근 개발되고 있는 전자자기 컴퍼스를 이용한 소형어선의 항행자동화시스템을 구축하기 위한 기초 연구로서, 부두에 계류된 선박에서 각종 장비의 가동 시켰을 때 나타나는 컴퍼스 오차 변화를 측정하여 비교 분석한 결과를 요약하면 다음과 같다. 1. 목선에서 85kW의 집어등을 점등하였을 때, 조타용 자기컴퍼스는 7$^{\circ}$편서되었고, 전자자기 컴퍼스는 13$^{\circ}$~16$^{\circ}$ 까지 편서되는 것으로 나타났다. 2. FRP 어선에서 13OkW의 집어등을 점등하였을때, 전자자기 컴퍼스는 19$^{\circ}$~23$^{\circ}$ 까지 편동되는 것으로 나타났다. 3. 강선에서 225kW의 전력으로 각종 장비를 가동 시킬 때, 가동전과 비교하여 컴퍼스 오차의 차분은 조타용 자기 컴퍼스에서는 13$^{\circ}$ 편서되고, 전자자기 컴퍼스는 상갑판에서는 68$^{\circ}$ 편서되었고, 선수루 갑판과 조타실 및 컴퍼스갑판에서는 각각 16$^{\circ}$, 32$^{\circ}$, 20$^{\circ}$ 편동되어 나타났다. 4. 소형어선의 항행자동화시스템에 전자자기 컴퍼스를 활용하기 위해서는 선박내에서 사용하는 각종 장비에 의해 발생하는 컴퍼스 오차를 측정하여 적절하게 수정하여 사용해야 할 것으로 판단된다.

호주 NSW 주 수상레저 선박의 면허지침에 관한 사례 연구 (A Study on NSW's Guide Book for the Boat Driver's Licence)

  • 최아옥;노창균
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
    • /
    • pp.247-253
    • /
    • 2006
  • 해양 스포츠와 관련하여 체계적인 시스템을 갖추고 있는 대표적인 나라로 호주가 있다. 호주 NSW 주에만 약 45만 명이 레저용 선박 면허를 가지고 있고, 약 20만 명이 등록된 선박의 소유자이며, 이러한 수치는 매년 3-4%씩 증가하고 있다. 본 연구는 이 NSW 주의 보트면허 지침에 관한 조사이다. 면허의 유형과 종류, 선박 등록, 레저용 선박을 선택하고 유지하는 방법, 구비해야 할 안전장비, 항해 전에 점검해야 할 일 등 수상레저를 즐기고자 하는 사람이라면 누구나 알아야 할 필수사항들을 다루고 있다. 그에 더하여 수로 교통법이라든지, 항해표지, 응급 시 대처 방안과 같은 기술적인 면도 언급한다. 최근 주5일 근무제의 확산으로 많은 사람들이 증가된 여가시간을 활용하기 위하여 해상 레포츠에 관심을 기울이고 있는 추세이다. 이러한 수요를 효율적으로 관리 감독하고, 또한 질서 있고 안전한 여가 활동을 제공하기 위하여 좀 더 체계적이고 편리한 레저용 선박 면허제의 도입을 제안하는 바이다.

  • PDF