• Title/Summary/Keyword: Power System for the Ocean

Search Result 654, Processing Time 0.027 seconds

Design interchangeable battery modules with spare cells for electrical propelled ship (전기추진선박에서 예비-셀을 이용한 자가 진단 기반의 배터리 관리 시스템 설계 및 구현)

  • Lee, Jong-Hak;Oh, Ji-Hyun;Oh, Jin-Seok
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.25 no.5
    • /
    • pp.709-718
    • /
    • 2021
  • As regulations on environmental pollution of ships have been strengthened, interest in smart ships such as electric propulsion ships equipped with hybrid power systems is increasing. Since batteries used in electric propulsion ships have a larger capacity than batteries used in vehicles, the price is high and maintenance is considered important. The ship's battery is manufactured as an integral type and is managed by the battery management system, and the maintenance and repair of the battery is performed through the replacement of the battery. we design and implement a battery module and a control algorithm using pre-cell for easy battery management. In addition, a controller is designed to transmit the data necessary for the electric propulsion ship power system control to the power control system. When a battery to which the corresponding spare-cell is applied is used, the stability of the ship and the battery system is increased, and it can have an advantage in terms of maintenance and repair.

Extraction of Wave Energy Using the Coupled Heaving Motion of a Circular Cylinder and Linear Electric Generator (원기둥과 선형발전기의 연성 수직운동을 이용한 파 에너지 추출)

  • Cho, Il-Hyoung;Kweon, Hyuck-Min
    • Journal of Ocean Engineering and Technology
    • /
    • v.25 no.6
    • /
    • pp.9-16
    • /
    • 2011
  • The feasibility of wave energy extraction from a heaving truncated cylinder and the corresponding response of the linear electric generator (LEG) composed of spring, magnet, and coil has been investigated in the frame of three-dimensional linear potential theory. The heaving motion of a circular cylinder is calculated by means of the matched eigenfunction expansion method. Further, the analytical results are validated by numerical results using the ANSYS AQWA commercial code. By the action of a heaving circular cylinder, the magnet suspended by a spring can slide vertically inside the heaving cylinder. The mechanical power is extracted from the magnet motion relative to the coil/stator which is attached to the cylinder. The coupled ODE of a heaving cylinder and LEG system in waves is derived to obtain the magnet motion relative to a cylinder. To maximize the relative motion of the magnet, both the buoy draft and the LEG system parameters (spring stiffness, damping) should be selected properly for generating the double resonance considering the peak frequency of the target spectrum.

An Estimation Technique for the Thrust Performance of AUVs (AUV의 추진성능 추정 기법 연구)

  • Lee, Chong-Moo;Choi, Hyun-Taek;Moon, Il-Sung;Lee, Pan-Mook
    • Journal of Ocean Engineering and Technology
    • /
    • v.23 no.4
    • /
    • pp.47-51
    • /
    • 2009
  • Thrust is one of the important performance characteristics of an AUV. At the design stage, the resistance of an AUV at its maximum speed is estimated and then the thrust system is designed, including the propeller diameter, propeller rpm, driving system, and required power. However, it is not possible to be certain that the thrust system has been correctly designed until the AUV is launched and its speed is measured. If data from a propeller open-water test is available, the thrust and torque of the propeller at a certain speed can be estimated. In addition, if the motor's torque characteristics are available, the maximum speed saturated by the induced propeller torque can be estimated. In this paper, an easy technique for estimating the maximum speed of an AUV will be shown, even in a case where additional resistance is gained from appendages not considered at the design stage. Furthermore, the thrust performance changes by adjusting the diameter of the propeller can be easily investigated.

Assessment of fishing power and fishing capacity of the snow crab (Chionoecetes opilio) gillnet fishery in the East Sea (동해안 대게 자망어업의 어획 성능 및 어획 능력 평가)

  • Lee, Kyoung-Hoon;Kim, Pyung-Kwan;Kim, Do-Hoon;An, Heui-Chun;Lee, Chun-Woo
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.48 no.1
    • /
    • pp.29-39
    • /
    • 2012
  • Currently, environment-friendly and sustainable fisheries are one of the major issues among fisheries authorities. A variety of alternative management policies and projects are going on to enhance fisheries management systems and fishery resources such as a TAC management program and a VDS (Vessel Day Scheme) management scheme for distant water fishing nations in Western and Central Pacific Fisheries Commission (WCPFC) convention area. These kinds of efforts among fisheries management authorities are aimed at limiting fishing capacity or fishing power. In terms of fisheries management, Fishing capacity and fishing power have increased the importance of the impact on a fishery and level of the resources. Increased fishing capacity and fishing power have caused not only depletion of fisheries resource, but also additional fishing cost. therefore, there is a clear need for authorities to manage fishing capacity and fishing power. It is also help ensure the conservation and sustainability of the fishery resources. Because of lack of data, absolute fishing power is difficulty to measure. The notion of relative fishing power is frequently used. In this study, relative fishing power was assessed using Mastuda (1991) method for fishing power index. The raw data for assessment was based on fishermen's logbook data from sampled fishing vessels in coastal snow crab gillnet fishery. Data Envelopment Analysis (DEA) method was used to assess fishing capacity. DEA is a linear programming methodology to measure the efficiency of a set of entities called Decision-Making Units (DMUs). It was recommended by FAO for assessing capacity in fisheries.

Vibration and Noise Analysis for Rotary Compressor in Medium-to-high Frequency Ranges (중고주파수 대역의 회전형 압축기 진동소음 해석)

  • Kwon, Hyun-Wung;Song, Jee-Hun;Hong, Suk-Yoon;Hwa, Jong-Hun
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.22 no.11
    • /
    • pp.1033-1041
    • /
    • 2012
  • Power flow analysis(PFA) is introduced for solving the noise and vibration analysis of system structures in medium-to-high frequency ranges. The vibration analysis software, $PFADS_{C++}$ R4 based on power flow finite element method(PFFEM) and the noise prediction software, $NASPFA_{C++}$ R1 based on power flow boundary element method(PFBEM) are developed. In this paper, the coupled PFFE/PFBE method is used to investigate the vibration and radiated noise of the rotary compressor. PFFEM is employed to analyze the vibrational responses of the rotary compressor, and PFBEM is applied to analyze the radiation noise around rotary compressor. The vibrational energy of the structure is used as an acoustic intensity boundary condition of PFBEM. Numerical simulations are presented for the rotary compressor, and reliable results have been obtained.

Digital DC power supply for light accelerator

  • Kim, Yoon-Sik
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.38 no.8
    • /
    • pp.1000-1003
    • /
    • 2014
  • There are 70 vertical and 70 horizontal correctors for Pohang Light Source. Until mid of 2000, power supplies for these correctors were based on 1990's technology, so the global orbit feedback system was not possible with poor 12 bit resolution. A new task force team was assembled to develop new power supplies with BESSY type DAC cards. After the project, two vertical correctors in each lattice were connected with new power supplies, and the global orbit feedback was available within the accuracy of 5 microns. However, this replacement was not enough to satisfy the beam stability requirement of 2 microns for PLS. We have launched another power supply design based on all digital technology. This attempt was completed within a year, and 80 units were assembled in house. Currently, the global orbit feedback system is running successfully with new digital power supplies and the compensation of chamber motion due to the thermal load by using digital displacement transducers attached on each BPMs.

The Characteristics of Wave Statistical Data and Quality Assurance (파랑 통계자료의 특성과 신뢰성 검토)

  • Park, J.H.
    • Journal of Power System Engineering
    • /
    • v.13 no.2
    • /
    • pp.63-70
    • /
    • 2009
  • This paper discusses the influence on long-tenn predictions of the ship response in ocean by using the Global Wave Statistics data, GWS, and wave information from the remote sensing satellites. GWS's standard scatter diagrams of significant wave height and zero-crossing wave period are suggested to be corrected to a round number of 0.01/1000 fitted with a statistical analytic model of the conditional lognormal distribution for zero-crossing wave period. The GEOSAT satellite data are utilized which presented by I. R. Young and G. J. Holland (1996, named as GEOSAT data). At first, qualities of this data are investigated, and statistical characteristic trends are studied by means of applying known probability distribution functions. The wave height data of GEOSAT are compared to the data observed onboard merchant ships, the data observed by measure instrument installed on the ocean-going container ship and so on. To execute a long-tenn prediction of ship response, joint probability functions between wave height and wave period are introduced, therefore long-term statistical predictions are executed by using the functions.

  • PDF

Development of a Side Scan Sonar System for Underwater Sun (천해용 Side Scan Sonar의 송수신 시스템 구현 및 운용에 관한 연구)

  • 오영석;이철원;강도욱;우종식
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2000.10a
    • /
    • pp.222-227
    • /
    • 2000
  • "Side scan sonar" using acoustic signal has been developed to survey cable laying, sunken bodie\ulcorner bottom and so on. It use the acoustic signals, which are emitted from two transducer arrays, to get gemetri\ulcorner target area. This system consists of transceiver board, towed body, and deck unit. The transceiver board, w\ulcorner watertight canister of the towed body, controls the transmitting and receiving of 400kHz acoustic signals from \ulcorner After receiving the scattered signals, it processes the filtering, AGF(Automatic Gain Control), TVG(Time Heterodyne. The deck unit is composed of the signal processing part, A/D converter, power supplier, and real\ulcorner And the towed body has been designed to satisfy the optimal hydrodynamic behavior during towing. The de\ulcorner theory of transceiving part and some results from field-experiments will be introduced here.

  • PDF

A Study on the Foam Wastewater Treatment and Foam Collection by Inhalation Force at the Outlet of Power Plants (발전소 방류구의 흡입력을 이용한 거품수거 및 거품액 처리 연구)

  • Jang, Heui-Su;Mun, Gyeng-Seok
    • Journal of Korean Society on Water Environment
    • /
    • v.21 no.5
    • /
    • pp.496-499
    • /
    • 2005
  • Power Plant is requested, by environmental bodies and fisherman, to correct the pollution of coastal area due to the outflow of foam from the outlet of the power plants. Foam wastewater cause a lot of environmental problems, expecially in aesthetic points of view. Therefore, It is needed to be collect from the stream into nearby ocean, and the collected foams should be treated before being discharged into nearby ocean. The most effective and feasible treatment method researched for the effective treatment of foam wastewater generated at the power plants. The result of the test is confirmed with collecting Foam wastewater by inhalation force. The treatment pilot ($3m^3/hr$) collected wastewater was operated by Biological degradation method(Aerobic/anaerobic Processes) for approximately two months. It was removed SS, COD, nutrient(T-P, T-N), etc. The System is expected successfully by Minimizing the operating costs such as electricity, repair expenses, chemicals and supplies expenses.

Hegemonic Competition and the Role of Naval Power (패권경쟁과 해군력의 역할)

  • Kim, Kyeong-Sik
    • Strategy21
    • /
    • s.41
    • /
    • pp.108-152
    • /
    • 2017
  • This paper aims to analyze hegemonic competition and the role of naval power. To this end the paper is composed of four chapters titled introduction, the role of naval power in the hegemonic competition, the role of naval power in the East Asia, and the lessons and implications for the Korean Peninsula. Since the modern era, the hegemonic competition in the East Asian region has been the intrusion and struggle process between the world system and the East Asian regional system, and the ocean between these two systems has become the goal and means of supremacy(hegemony). Currently, the hegemonic competition between the US and China consists of systemic competition at the global level and marine competition at the regional level. When South Korea is forced to make strategic choices in the course of the US-China hegemonic competition, naval power will be the first factor to be considered. The ROK is asymmetrically maintaining a deep dependency relationship with the United States in terms of security and China in relation to the economy. And while the ROK's national economic power is acquired from the ocean, the ROK's military power is imbalanced because it is centered on the ground forces. These international relations and asymmetric-unbalanced resources distribution will not be able to effectively cope with the hegemonic competition between the US and China in the future, and will limit Korea's strategic choice. Since naval power and forces are the prerequisites for the hegemonic competition or the maintenance of supremacy we must construct balanced naval forces(naval power) that are not subordinate to the ground forces at the national strategic level for the future of the country.