• 한국통신학회논문지
• /
• 제30권9A호
• /
• pp.729-736
• /
• 2005

본 논문에서는 OFDMA/TDD 방식을 사용하는 휴대 인터넷 시스템에서 상향링크 부채널 할당 및 전력제어 알고리즘의 설계 및 구현에 대하여 살펴보았다. OFDMA 시스템에서 단말기의 송신전력은 기지국보다 낮게 설계되지만 단말기는 기지국과 같이 최소 1개부터 최대일 때 부채널 전부를 사용할 수 있기 때문에 부채널 전부를 사용할 수 있는 거리(FLR : full loading range)의 제한이 생기고 FLR 바깥에 위치한 단말은 기존의 개방루프 전력제어 방식을 사용할 수 없는 문제가 발생한다. 본 논문에서는 OFDMA 시스템의 ranging 정보를 이용하여 단말기의 위치를 파악하고 단말기의 위치에 따라서 사용가능한 부채널수를 제한하고 PCG(power concentration gain)를 인가하는 방식을 제안하였다. 시뮬레이션을 통한 실험결과에서 제안된 방식은 상향링크 통화반경을 셀 경계지역까지 확보하면서 무선자원의 최적 활용이 가능하며 FLR 바깥에서 상향링크 전력제어가 별도의 하드웨어 없이 가능함을 확인하였다.

• 신재생에너지
• /
• 제7권4호
• /
• pp.37-41
• /
• 2011

This paper presents a Combined solar-wave Power Generation (CPG) concept that the CPG unit is maintained as buoyant at the level of sea water and it is also supported by a submerged tunnel, with the aim of supplying emergency electric power during the station blackout events of nuclear power plants. The CPG concept has been motivated from the 2011 Fukushima-Daiichi Accidents due to the loss of both offsite AC power and emergency diesel power caused by natural hazards such as earthquake and tsunami. The CPG is conceptualized by applying different types and different sites for emergency power generation, in order to reduce common cause failures of emergency power suppliers due to natural hazards. Thus, the CPG can provide a new mean for supplying emergency electric power during station blackout events of nuclear power plants. For this application, the CPG requirements are described with a typical configuration at the ocean side of a submerged tunnel.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권3호
• /
• pp.215-222
• /
• 2019

This work is experimental study of 10 kW specialized Combined Ocean Thermal Energy Conversion. We propose a C-OTEC technology that directly uses exhaust thermal energy from power station condensers to heat the working fluid (R134a), and tests the feasibility of such power station by designing, manufacturing, installing, and operating a 10 kW-pilot facility. Power generation status was monitored by using exhaust thermal energy from an existing power plant located on the east coast of the Korean peninsula, heat exchange with 300 kW of heat capacity, and a turbine, which can exceed enthalpy efficiency of 45%. Output of 8.5 kW at efficiency of 3.5% was monitored when the condenser temperature and seawater temperature are $29^{\circ}C$ and $7.5^{\circ}C$, respectively. The evaluation of the impact of large-capacity C-OTEC technology on power station confirmed the increased value of the technology on existing power generating equipment by improving output value and reducing hot waste water. Through the research result, the technical possibility of C-OTEC has been confirmed, and it is being conducted at 200 kW-class to gain economic feasibility. Based on the results, authors present an empirical study result on the 200 kW C-OTEC design and review the impact on power plant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.251-252
• /
• 2008

Si-Hwa tidal power station is using difference of the ebb and flow. The active power is dependent on up and down sea water level but if it is drastically changed because of a typhoon or waves the generator terminal voltage and active power is changed that is a chief cause of power station unstability. Therefore this paper arrange a present state of power or frequency fluctuation and generator terminal phase difference in case of occurrence a drastic change of sea water level.

• 한국농공학회논문집
• /
• 제48권3호
• /
• pp.73-82
• /
• 2006

Wind energy is one of the promising renewable energies that could provide electricity and other mechanical power. Wind energy market is dramatically growing in many European countries, but wind power is only 0.2% of the total renewable energy uses that is only about 2% of the primary energy consumption in Korea. It is widely accepted that wind resources fur power generation are only limited in some areas including coastal regions and mountainous areas in Gangwon province in Korea, particularly in terms of large scale wind power developments. In this study, wind velocity data were analyzed with respect to the potential utilization. The data provided from National Weather Service were used for the analysis. In addition, field wind data were also collected and analyzed for the comparison between the national data. The comparison showed that there were significant differences between the experimental station and the national station that are about 5km away. Annual average wind speed at the experimental station was less than 2 m/s, which is not enough fur wind power generation. It seemed that the topographic condition resulted in a significant difference in wind speed. When 600 W and 2.5 kW wind turbines were used, annual power productions were only 186 kWh and 598 kWh, respectively. When the average wind speed is lower, wind pumping is an alternative use of wind. At the experimental station, the average pumping rate of $3m^3/h$ at the head of 3 m was expected at a 2.5 m rotor under the conditions that efficiencies of the rotor and the pump were 40% and 80%, respectively. It did not seem that the wind pumping was not applicable at the station either. A higher wind speed was required to install the wind machines. Meanwhile, wind pumping would be applicable in conditions with lower pumping heads. Other applications were introduced far further wind energy utilization, including wind powered ventilation and friction heat generation in greenhouses.

• 한국통신학회논문지
• /
• 제33권5A호
• /
• pp.517-525
• /
• 2008

본 논문은 균일한 도심지역에서의 CDMA 시스템의 상향링크에 대하여 송신전력, 간섭전력 및 블로킹 확률 등을 최소화하는데 기지국 배치에 따라 결정되는 셀 모양의 효과를 분석하기 위하여 시스템 수준의 모의실험이 이루어진다. 도심 마이크로 셀에서 기지국에 대한 경로 손실은 단말이 위치한 거리의 방향성에 영향을 받는다. 단말로부터 기준 기지국에 대한 간섭은 2차 Tier까지 고려된다. 간섭 계산의 정확성에 대한 손실 없이 계산 복잡도를 줄이기 위한 방법으로Wrap around method가 사용된다. 모의실험 결과는 송신전력, 간섭전력 및 블로킹 확률 등이 효율적인 기지국 배치에 따른 셀의 모양에 따라 줄어들 수 있음을 보여준다.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1612-1620
• /
• 2016

This paper presents the dynamic excitation control of a siphon-turbine coupled pico-hydro powered cage rotor induction generator and load matching for off-grid electricity generation. Through the proposed dual-role of the current-controlled voltage source converter (VSC), acting as static synchronous compensator and load controller, real and reactive power are dynamically controlled in a decoupled manner with a self supported DC-bus. The proposed scheme entails minimal computation for ensuring the rated (set) capacity of real power. The scheme also exhibits fault immunity for protection, thus enabling the effective handling of constant power electrical loads presented by base telecom station towers in remote locations. The performance of the system is evaluated under MATLAB/Simulink and is experimented through a developed hardware prototype. Simulation and experimental results show close conformity and validate the effectiveness of the proposed scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1144_1145
• /
• 2009

Tidal power station is using the difference of the ebb and flow and the single action tidal power is dependent on tide amplitude and basin volume. Therefore the inflow of basin in rainy season has also effect on the daily power. Also if operating units are changed then starting head too changed. Therefore the number of units are very important for the optimization model. According to our study the primary point when we make a determination of optimization is starting head and governorl control mode. On this study optimization model for tidal power station is considered all of this conditions.

• 방사성폐기물학회지
• /
• 제19권3호
• /
• pp.297-306
• /
• 2021

In this study, basic strategies for the decommissioning and site remediation of the Fukushima Daiichi Nuclear Power Station (FDNPS) were investigated. Six scenarios were formulated based on two of the three decommissioning strategies of nuclear power plants defined by the International Atomic Energy Agency (IAEA): immediate dismantling and deferred dismantling. A multicriteria decision analysis was performed to analyze the preferences of the options from the viewpoints of the timeframe to complete decommissioning, the resulting waste, the site usability, and the availability of the radioactive waste disposal route. The same six scenarios were applied to both the FDNPS and the nuclear power plants that ceased operation after a normal plant life cycle for comparison. For the FDNPS, the decommissioning project involved fuel debris retrieval, dismantling, and site remediation. The analysis results suggest that the balance between the amount of waste and the time to achieve the end state may be one of the most critical factors to consider when planning the decommissioning and site remediation of the FDNPS.

• Journal of Radiation Protection and Research
• /
• 제49권2호
• /
• pp.65-67
• /
• 2024

This review is based on articles published in Japanese Journal of Health Physics on "Radiation-exposed medical care and waste" related to Tokyo Electric Power Company Incorporated (TEPCO)'s Fukushima Daiichi Nuclear Power Station accident. Here, we have considered three original articles; one technical data, one special article, one 50^th anniversary article, one preface, three topics, and two cases of From Japan to the World (J to W). These articles have reported the system and standards that were established after the accident. Moreover, they have summarized rare experiences such as the fumbling response at the time and the evaluation of samples in that disaster. These articles constitute valuable records of the situation.