• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1639-1645
• /
• 2015

In UHD high-speed video transmission system, when a signal within certain frequency region coincides electrically and structurally, the system becomes unstable because the energy is concentrated, and signal flux is interfered and distorted. For the instability, power integrity analysis should be conducted. To remove the signal distortion for MLB, using a high-frequency design technique for EMI phenomenon, EMI which radiates electromagnetic energy fluxed into power layer was analyzed considering system stabilization. In this paper, we proposed an adaptive MLB design method which minimizes high-frequency noise in MLB structure, enhances signal integrity and power integrity, and suppresses EMI. The characteristic impedance for multi-layer circuit board proposed in this study were High-Speed Video Differential Signaling(HSVDS) line width w = 0.203, line gap d = 0.203, beta layer height h = 0.145, line thickness t = 0.0175, dielectric constant ε_r = 4.3, and characteristic impedance Zdiff = 100.186Ω. When high-speed video differential signal interface board was tested with optimized parameters, the magnitude of Eye diagram output was 672mV, jittering was 6.593ps, transmission frequency was 1.322GHz, signal to noise was 29.62dB showing transmission quality improvement of 10dB compared to previous system.

• The Journal of Korean Philosophical History
• /
• no.30
• /
• pp.311-344
• /
• 2010

Over 100 years in Mainland China, the 'traditional' thought and culture have been transformed from 'the past must be sublated' to 'the heritage must be preserved.' Today, China hopes to deal with the negative effects of industrial development such as the gap between rich and poor, and the absence of common values etc. through the reconstruction of traditional thought and culture, especially that of Confucianism. The Chinese government superficially accepts Confucianism for the purpose of the social stabilization and ongoing economic development while they keep the Socialism as the nation's ideological system. In the private sectors, there is endeavoring move to make the Chinese traditional thought and culture global paralleled to their economic growth. There are also scholars who find the cultural unification and the spiritual comfort from the restoration of the traditional thought and culture. They, so called 'the critical successionists' or 'the cultural conservativists,' believe that the traditional thought and culture could play a role in the Chinese modernization, and the new understanding and interpretation of their tradition could provide an alternative for their future. In my view, we need a careful survey on the view of the critical successionists or the cultural conservativists who regard tradition and culture as a power (力量). With this, we are required to investigate our own problems through the new understanding of our traditional thought and culture.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.597-604
• /
• 2010

This study focuses on the design of a mechanical joint for a zero moment crane (ZMC), which is a specialized loading/unloading system used in a mobile harbor (MH). The mechanical joint is based on the concept of zero moment point (ZMP), and it plays an important role in stabilizing a ZMC. For effective stabilization, it is necessary to ensure that the mechanical joint is robust to a wide variety of loads; further, the joint must allow the structures connected to it to perform rotational motion with two degrees of freedom By adopting a traditional design process, we designed a new mechanical joint; in this design, a universal joint is coupled with a spherical joint, and then, deformable rolling elements are incorporated. The rolling elements facilitate load distribution and help in decreasing power loss during loading/unloading. Because of the complexity of the proposed system, Kriging-based approximate optimization method is used for enhancing the optimization efficiency. In order to validate the design of the proposed mechanical joint, a structural analysis is performed, and a small-scale prototype is built.

• Journal of Korean Physical Therapy Science
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2011

Background: The purpose of this study was to systematic review the effect of exercise programs for chronic low back pain patients. We needs systematic development of low back pain exercise program to reduce economic cost further doing great service to public health promotion. Methods: We searched to the effects of exercise programs for chronic low back pain patients by Dankook University electronic library databases of DBPIA, KSI KISS, CINAHL, MEDLINE and PEDro combined with a hand search of papers published in relevant journals. Any type of study relevant to the topic published during time period from 1970 to 2007 was included. Results: The literature search identified 30 studies. 1.Performing the flexion exercise increased abdominal muscle activity but acute herniated intervertebral disc should be avoided. 2.The general lumbar extension exercise used lumbar extension machine and the muscle power increases, significant probability the change. 3.The spinal segments exercise for the patients offered significant efficacy and appeared to be a reasonable therapeutic option. 4.Spinal stabilization exercises appear to improve trunk endurance and balance to patients with chronic low back pain. This exercise programs had effective decrease pain and disability. Conclusion: The review suggests that although the exercise programs for chronic low back pain patients, and we expected the efficacy of the exercise programs for chronic low back pain patients used in this study should be further investigated in a long period study and objective outcomes.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.6
• /
• pp.51-60
• /
• 2015

This study conducted shear strength test and plate bearing test to look into the characteristics of bearing capacity using geosynthetics case on forest road surface. The shear strength test showed that the internal friction angle at the time when geosynthetics was used was measured larger on average than that in the unreinforced case. Therefore, using geosynthetics case produced more bearing capacity reinforcement effect. The result from the comparison test of internal friction angle by geosynthetics type revealed that the internal friction angle at the time when geotextile case was used was measured larger. That was attributable to the difference between the area of the total cross section of geotextile made in type of non-woven fabric and its material. Plate bearing test showed that the settlement at the time when geosynthetics was used was measured smaller than that in the unreinforced case. Therefore, using geosynthetics produced more bearing power reinforcement effect. The result from the comparison test showed that geogrid case was measured smaller than geotextile case. Henceforth, It is seemed that it will be necessary to keep studying the reinforcement engineering and process of forest road surface which fits the characteristics and conditions of geosynthetics to prevent forest road demage.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.3
• /
• pp.49-58
• /
• 2000

This paper deals with a systematic approach to neural network controller design for static VAR compensator (SVC) using a learning algorithm of error back propagation that accepts error and change of error as inputs, the momentum learning technique is used for reduction of learning time, to improve system stability. A SVC, one of the Flexible AC Transmission System(FACTS), constructed by a fixed capacitor(FC) and a thyristor controlled reactor(TCR), is designed and implemented to improve the damping of a synchronous generator, as well as controlling the system voltage.TO verify the robustness of the proposed method, we considered the dynamic response of generator rotor angle deviation, angular velocity deviation and generator terminal voltage by applying a power fluctuation and rotor angle fluctuation in initial point when heavy load and normal load. Thus, we prove the usefulness of proposed method to improve the stability of single machine-infinite bus with SVC system.

• Journal of Korean Neurosurgical Society
• /
• v.43 no.6
• /
• pp.294-299
• /
• 2008

Objective : To evaluate the clinical characteristics and surgical outcomes of the patients with cervical spondylotic myelopathy associated with athetoid cerebral palsy. Methods : The authors reviewed the clinical and neurodiagnostic findings, surgical managements and outcomes in six consecutive patients with cervical spondylotic myelopathy associated with athetoid cerebral palsy who had been treated with surgical decompression and fusion procedures between January 1999 and December 2005. The mean age of the 6 patients (four women and two men) at the time of surgery was 42.8 years (range, 31-55 years). The mean follow-up period was 56.5 months (range, 17-112 months). The neurological outcome was evaluated before and after operations (immediately, 6 months after and final follow-up) using grading systems of the walking ability, brachialgia and deltoid power. Results : At immediate postoperative period, after 6 months, and at final follow-up, all patients showed apparent clinical improvements in walking ability, upper extremity pain and deltoid muscle strength. Late neurological deterioration was not seen during follow-up periods. There were no serious complications related to surgery. Conclusion : Surgical decompression and stabilization in patients with cervical spondylotic myelopathy associated with athetoid cerebral palsy have been challenging procedure up to now. Our results indicate that early diagnosis and appropriate surgical procedure can effectively improve the clinical symptoms and neurological function in patients with cervical spondylotic myelopathy and athetoid cerebral palsy, even in those with severe involuntary movements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.166-172
• /
• 2001

A RF wideband receiver for INMARSAT-B satellite communications system was composed of low noise amplifier and high gain amplifier, The low noise amplifier used to the resistive decoupling circuit for input impedance matching and self-bias circuits for low noise. The high gain amplifier consists of matched amplifier type to improve receiver gain. The active bias circuit can be used to provide temperature stability without requiring the large voltage drop or relatively high-dissipated power needed with a bias stabilization resistor. The bandpass filter was used to reduce a spurious level. As a result, the characteristics of the receiver implemented here show more than 60 dB in gain and less than 1.8:1 in input and output voltage standing wave ratio(VSWR), especially the carrier to noise ratio which is input signal level -126.7 dB m at 1537.5 MHz is a 45.23 dB /Hz at a 1.02 kHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.147-153
• /
• 2018

Beacon enables one to measure distance indoors based on low-power Bluetooth low energy (BLE) technology, while GPS (Global Positioning System) only can be used outdoors. In measuring indoor distance using Beacon, RSSI (Received Signal Strength Indication) is considered as the one of the key factors, however, it is influenced by various environmental factors so that it causes the huge gap between the estimated distance and the real. In order to handle this issue, we propose the adaptive ANN (Artificial Neural Network) based approach to measuring the exact distance using Beacon. First, we has carried out the preprocessing of the RSSI signals by applying the extended Kalman filter and the signal stabilization filter into decreasing the noise. Then, we suggest the multi-layered ANNs, each of which layer is learned by specific training data sets. The results showed an average error of 0.67m, a precision of 0.78.

• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.264-269
• /
• 2015

An infrared (IR) bolometer measures the change of resistance by absorbing incident IR radiation and generates a signal as a function of the radiation intensity. Since a bolometer requires temperature stabilization and light filtering except for the infrared rays, it is essential for the device to be packaged meeting conditions that above mentioned. Minimization of heat loss is needed in order to stabilize temperature of bolometer. Heat loss by conduction or convection requires a medium, so the heat loss will be minimized if the medium is a vacuum. Therefore, vacuum packaging for bolometer is necessary. Another important element in bolometer packaging is germanium (Ge) window, which transmits IR radiation to heat the bolometer. To ensure a complete transmittance of IR light, anti-reflection (AR) coatings are deposited on both sides of the window. Although the transmittance of Ge window is high for IR rays, it is difficult to use frequently in low-price IR bolometer because of its high price. In this paper, we fabricated IR window by utilizing silicon (Si) substrate instead of Ge in order to reduce the cost of bolometer packaging. To enhance the IR transmittance through Si substrate, it is textured using Reactive Ion Etching (RIE). The texturing process of Si substrate is performed along with the change of experimental conditions such as gas ratio, pressure, etching time and RF power.