• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.11a
• /
• pp.114-117
• /
• 2006

Diffraction grating is the optical device which has periodic pattern. Decorative logotypes is the one of application of diffraction grating. In this paper diffraction grating for decorative logotype is fabricated by dot pattern in stead of line pattern. A metallic mold for diffraction gratings is fabricated with a mode-locked 12 ps $Nd:YVO_4$ laser. Laser pulses with a wavelength of 355nm are irradiated on the surface of NOK 80, a mold material, to generate dot patterns. In order to minimize the dot diameter, laser power is set just above the ablation threshold of NOK 80. Results show that the spectrum from the fabricated mold is good enough for some industrial application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.14-24
• /
• 2017

In this paper, we propose a new EIM(erasure insertion method) based on the average-minimal-noise-power for HOM(higher order modulation) over AWGN(additive white Gaussian noise) under PBJ(partial-band jamming). Then we design SFH/SS(slow-frequency-hopping spread-spectrum) system by applying this method and formulate the PER(packet error rate) of the system. Based on this formula, we propose a new method to set the optimal threshold of the EIM and verify it at the designed 16-QAM SFH/SS system.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2246-2253
• /
• 2000

In this paper, we show that one can enhance the performance of blind segmentation of phoneme boundaries by adopting the knowledge of Korean syllabic structure and the regions of voiced/unvoiced sounds. eh proposed method consists of three processes : the process to extract candidate phoneme boundaries, the process to detect boundaries of voiced/unvoiced sounds, and the process to select final phoneme boundaries. The candidate phoneme boudaries are extracted by clustering method based on similarity between two adjacent clusters. The employed similarity measure in this a process is the ratio of the probability density of adjacent clusters. To detect he boundaries of voiced/unvoiced sounds, we first compute the power density spectrum of speech signal in 0∼400 Hz frequency band. Then the points where this paper density spectrum variation is greater than the threshold are chosen as the boundaries of voiced/unvoiced sounds. The final phoneme boundaries consist of all the candidate phoneme boundaries in voiced region and limited number of candidate phoneme boundaries in unvoiced region. The experimental result showed about 40% decrease of insertion rate compared to the blind segmentation method we adopted.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.175-180
• /
• 1998

Nd:YAG single crystal widely used as solid state laser was grown by Czochralski method. <111> single crystal with 0.9at% of $Nd^{3+}$ was grown from the Czochralski furnace with a automatic diameter control system. The vertical temperature gradient in the liquid was the major factor that influence the crystal quality, and the crystal diameter was controlled by the home made computer program. The crystal boule with $\phi$50mm$\times$ι100mm effective size was cut, polished, and antireflection coated. The optical evaluation such as absorption spectrum, fluorescence spectrum coincide with typical features of Nd:YAG single crystal. The laser rod was assembled into the CW laser generator with a Kr lamp. The maximum CW laser output was 70 W and the threshold power and efficiency was 1.3kW and 1.64% respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.4819-4834
• /
• 2015

The spectral efficiency of cellular networks can be improved when proximate users engage in device-to-device (D2D) communications to communicate directly without going through a base station. However, D2D communications that are not properly designed may generate interference with existing cellular networks. In this paper, we study resource allocation and power control to minimize the probability of an outage and maximize the overall network throughput. We investigate three power control-based schemes: the Partial Co-channel based Overlap Resource Power Control (PC.OVER), Fractional Frequency Reuse based Overlap Resource Power Control (FFR.OVER) and Fractional Frequency Reuse based Adaptive Power Control (FFR.APC) and also compare their performance. In PC.OVER, a certain portion of the total bandwidth is dedicated to the D2D. The FFR.OVER and FFR.APC schemes combine the FFR techniques and the power control mechanism. In FFR, the entire frequency band is partitioned into two parts, including a central and edge sub-bands. Macrocell users (mUEs) transmit using uniform power in the inner and outer regions of the cell, and in all three schemes, the D2D receivers (D2DRs) transmit with low power when more than one D2DRs share a resource block (RB) with the macrocells. For PC.OVER and FFR.OVER, the power of the D2DRs is reduced to its minimum, and for the FFR.APC scheme, the transmission power of the D2DRs is iteratively adjusted to satisfy the signal to interference ratio (SIR) threshold. The three schemes exhibit a significant improvement in the overall system capacity as well as in the probability of a user outage when compared to a conventional scheme.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.06a
• /
• pp.97-100
• /
• 2006

Picosecond (ps) laser micro-machining has emerged as an attractive method of fabricating high-precision microstructures, especially in metals. In this paper, a metallic mold for diffraction gratings is fabricated with a mode-locked 12 ps $Nd:YVO_4$ laser. Laser pulses with a wavelength of 355nm are irradiated on the surface of NOK 80, a mold material, to generate line patterns. In order to minimize the line width, laser power is set just above the ablation threshold of NOK 80. Results show that the spectrum from the fabricated mold is good enough for some industrial application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1832-1840
• /
• 2000

The error diffusion algorithm is good for reproducing continuous images to binary images. However the reproduction of edge characteristics is weak in power spectrum an analysis of display error. In this paper an edge enhanced error diffusion method is proposed to improve the edge characteristic enhancement. Spatial gradient information in original image is adapted for edge enhance in threshold modulation of error diffusion. First the horizontal and vertical second order differential values are obtained from the gradient of peripheral pixels(3x3) in original image. second weighting function is composed by function including absolute value and sign of second order differential values. The proposed method presents a good visual results which edge characteristics is enhanced. The performance of the proposed method is compared with that of the conventional edge enhanced error diffusion by measuring the edge correlation and the local average accordance over a range of viewing distances and the RAPSD of display error.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.37-44
• /
• 1999

Spectral characteristic of Kyeongju earthquake occurred on the June 2, 1999 with magnitude 3,4 is analyzed. It is guessed that the stress energy release of source within relatively short period caused the ground near the epicenter to vibrate with large amplitude for the magnitude and predominantly high frequency. The cumulative absolute velocity and average spectrum acceleration are 0.034 gsec and 0.118g, respectively lower than threshold values of potential earthquake damage which is consistent with the investigation of damage in field. The analysis of the acceleration records of Kyeongju earthquake shows the need to develop the ration criterion for the determining the operating basis earthquake of nuclear power plant.

• The Journal of Korean Physical Therapy
• /
• v.16 no.3
• /
• pp.176-191
• /
• 2004

The purpose of this study was to find the effects of the eccentric exercise induced delayed muscle soreness on proprioception, muscle strength, muscle fatigue, and muscle pain of the elbow flexor muscles. Thirty one healthy male subjects were participated in this study. Before resisted eccentric exercise of the elbow flexors and immediately and at 1, 3, 5, and 7 days post-exercise, pain threshold, proprioception, tension tracking, initial median frequency, and fatigue index were measured. Pain pressure threshold and visual analog scale (VAS) was used to measure muscle pain. Proprioception of the elbow joint was measured by using 3 dimension motion analysis system. Maximum isometric contraction was measured by using digital tensiometer. Electromyography and power spectrum analysis was used to measure initial median frequency (IMF) and fatigue index (FI). Immediately post-exercise, a significant decrease pain threshold was observed that continued to 5 days post-exercise. VAS score was significantly increased at 1 and 3 days post-exercise compared to that of immediately post-exercise. Maximum isometric contraction, IMF, tension tracking ability of the exercised elbow joint were significantly decreased at 1, 3, and 5 days post-exercise compared to that of pre-exercise. FI was significantly increased at 1 and 3 days post-exercise compared that of pre-exercise. Proprioception sense of exercised elbow joint was significantly decreased immediately and at 1, 3, and 5 days post-exercise compared to that of pre-exercise. Proprioception sense of the contralateral elbow joint was significantly decreased immediately post-exercise compared to that of pre-exercise. However, proprioception sense that was measured in close chain kinematic position was not significantly difference between pre-exercise and post-exercise. These results could be useful to determine the resume time for exercising and participating sports activities.

• Laser Solutions
• /
• v.15 no.3
• /
• pp.16-19
• /
• 2012

We have successfully formed brown colored patterns inside of a transparent borosilicate glass generally known as BK7, laying the focus of near infrared Ti: sapphire femtosecond laser beam in the bulk BK7 glass. It is important to keep the laser power well below the damage threshold of BK7 in forming the color center. According to the low laser power, there was no laser induced mechanical damage such as cracks or threads in the color formed area. From the absorbance spectrum and its gaussian fitting, we found the band gap of BK7, 4.21eV, and three absorption edges.