• 제목/요약/키워드: Power Signal

검색결과 5,913건 처리시간 0.032초

재벌기업에서 경영자능력이 장·단기 기업성과에 미치는 영향 (The effect of managerial ability on short-term or long-term firm performance in Chaebol)

  • 강선아;김용식
    • 경영과정보연구
    • /
    • 제36권1호
    • /
    • pp.233-249
    • /
    • 2017
  • 본 연구에서는 경영자 능력이 기업 성과에 긍정적인 영향을 미친다는 선행연구결과를 확장하여, 기업의 소유구조와 자본구조 및 의사결정 행태가 다른 재벌기업에서 경영자 능력이 기업의 성과에 미치는 영향이 차별적으로 나타나는지 여부를 분석한다. 재벌그룹의 경우 기업가치를 상승시키는 중요한 의사결정이 대부분 그룹의 총수에 의해 결정되고 강력한 지배력을 보임에 따라 그룹소속 경영자들 은 그룹총수의 의사결정 방향과 같은 방향으로 노력을 집중하게 된다. 따라서 재벌기업 소속의 경영자는 자신의 성과를 평가받기 위한 단기 회계이익보다는 장기적 관점의 기업가치 증가를 위해 자신의 능력을 집중할 것이고, 재벌기업 소속이 아닌 일반 경영자는 자신의 성과를 높이기 위하여 회계이익을 개선하는데 자신의 능력을 집중할 것으로 예상된다. 본 연구에서는 2000년부터 2015년 동안 상장기업을 대상으로, 장기 기업성과인 기업가치와 단기 기업성과인 회계이익을 각각 종속변수로 하여 재벌기업의 경영자능력과 기업의 장 단기성과 간 관계를 분석한다. 연구결과, 경영자의 능력과 장 단기성과 간에는 유의한 양(+)의 관계가 확인되었고, 일반기업과 달리 재벌그룹의 경우 장기성과인 기업가치는 높이는 방향으로, 단기성과인 회계이익은 낮추는 방향으로 관계가 확인되었다. 또한 재벌기업의 경영자능력은 추가적으로 장기성과 즉 기업가치에 긍정적인 영향을 주는 것으로 보고되었다. 이러한 결과는 재벌기업의 경영자가 재벌구조의 특성상 장기관점의 기업성과에 자신의 능력을 보다 집중하는 것을 의미한다. 재벌기업이 한국경제에서 차지하는 비중은 매우 크고 이러한 현상은 당분간 큰 변화가 없을 것으로 예상된다. 따라서 재벌기업의 지속적인 성장 여부는 우리 사회에서 매우 중요한 이슈이다. 최근 재벌기업의 지배주주 역할이 2세 또는 3세와 4세로 옮겨가고 있고 세계적인 저성장 구도와 함께 경쟁이 더욱 치열해지는 상황에서, 경영자 능력이 기업성과에 미치는 영향이 재벌기업에서 차별적으로 나타나는지 검증하는 연구는 매우 시의적절하고 중요하다고 볼 수 있다. 따라서 본 연구결과가 재벌기업의 성과측면에서 일면의 장점을 부각시키고, 일반 경영자의 능력이 단기적 회계이익이 아닌 장기적 관점에서 기업 가치 상승에 기여할 수 있도록 정부 및 관련당국의 정책마련에 새로운 시각을 제시한다는 점에서 시사하는 점이 크다고 본다.

  • PDF

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

Structural Behavior of Mixed $LiMn_2O_4-LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ Cathode in Li-ion Cells during Electrochemical Cycling

  • 윤원섭;이상우
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2011년도 춘계학술발표대회
    • /
    • pp.5-5
    • /
    • 2011
  • The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

  • PDF

심부 지열자원 개발을 위한 원거리 기준점 MT 탐사자료의 2차원 역산 해석 (Two-Dimensional Interpretation of Ear-Remote Reference Magnetotelluric Data for Geothermal Application)

  • 이태종;송윤호
    • 지구물리와물리탐사
    • /
    • 제8권2호
    • /
    • pp.145-155
    • /
    • 2005
  • 경상북도 포항시 흥해읍 일대에서 지열자원 개발을 위한 심부 파쇄대 탐지를 목적으로 수행된 자기지전류 (MT) 탐사에서 경북 안동과 충북 청원시의 대청호 및 일본의 Kyushu에 원거리 기준점을 설치하고 이를 이용한 자료처리 결과의 상호 비교를 통하여 원거리 기준점에 따른 겉보기 비저항과 위상 자료의 질을 검토하였다. 대상지역에서 약 165 km떨어진 대청호 자료를 이용한 경우는 전력주파수인 60 Hz대역과 자연 전자기장 신호가 미약한 $10^{-1}Hz\~1\;Hz$ 대역을 제외한 주파수 대역에서 매우 좋은 자료를 얻을 수 있었으며, 약 480 km 떨어진 Kyushu 원거리 기준점 자료를 이용해서 거의 모든 주파수 대역에서 연속성이 매우 좋은 전기비저항과 위상 곡선을 얻을 수 있었다. 이를 이용하여 2차원 역산을 수행한 결과, 지표의 10ohm-m 이내의 전기비저항을 보이는 반고결 이암층은 대상지역의 남쪽에서는 약 500 m 이상, 북쪽에서는 200 m 이내의 두께로 분포하며 북에서 남으로 경사진 형태로 나타났다. 심도 $500\~1,500m$에서 저비저항(L-2)과 고비저항(H-2)의 경계면은 단층면으로 해석되며 측점 206, 112와 414를 지나는 대략 $N15^{\circ}E$의 주향을 보인다. 1 km 이내의 천부의 저비저항 이상(L-4)은 파쇄대로 해석되며 측점 105를 지나면서 데략 $N60^{\circ}W$의 주향을 보인다. 또한, 북쪽의 큰 하천을 따라 저비저항 이상대가 공통적으로 나타나 구조선일 가능성을 시사한다. 그리고, 대상지역의 서쪽과 서남쪽의 $2\~3km$ 하부에서 10 ohm-m이내의 저비저항 이상대(L-3)가 나타나는데 이 층에 대해서는 향후 추가적인 연구가 요구된다.

E-Prime에 기반한 손가락 촉각 자극기의 개발 (Development of a Finger Tactile Stimulator Based on E-Prime Software)

  • 김형식;민윤기;김보성;민병찬;양재웅;이수정;최미현;이정한;탁계래;이봉수;전재훈;정순철
    • 감성과학
    • /
    • 제13권4호
    • /
    • pp.703-710
    • /
    • 2010
  • 본 연구에서는 선행 연구에서 개발된 촉각 자극 시스템의 시스템적인 문제, 자극 제어에 관한 문제, 기타 부가적인 문제들을 보완할 수 있는 촉각 자극기를 개발하였다. 개발된 장치는 제어부(control unit), 구동부(drive unit), 진동부(vibrator)의 세부분으로 구성된다. 제어부는 E-Prime 소프트웨어로부터 명령을 전송받고 진동 자극 신호를 발생한다. 구동부는 촉각 자극기가 효과적으로 진동 자극을 발생할 수 있도록 충분한 전류를 공급한다. 진동부는 작은 동전(coin) 형 진동기(vibrator)와 벨크로(velcro)로 구성되며 피험자의 손에 쉽게 고정 할 수 있도록 제작하였다. 개발된 장치는 소형, 경량, 저전력 구동, 간단한 구조, 최대 35개의 자극 채널, 시각 및 청각과의 다양한 자극 조합을 지연시간 없이 제시할 수 있도록 설계 되어 시스템적인 문제들을 보완하였다. 자극의 크기와 시간을 10단계로 조절할 수 있도록 하고, 넓은 동작주파수 범위를 확보하여 자극 제어에 관한 문제들을 보완하였다. 저전압 구동으로 인체에 대한 안정성을 확보하고, 손가락 이외에 신체의 어느 부분이든 자극 제시가 가능하도록 제작하였다. 특히 본 시스템은 인지과학 연구에서 범용으로 사용되는 소프트웨어인 E-Prime을 기반으로 개발되었기 때문에 활용성이 매우 높을 것으로 판단된다.

  • PDF

AMOLED 컬럼 구동회로 응용을 위한 시분할 기법 기반의 면적 효율적인 10b DAC (An Area-Efficient Time-Shared 10b DAC for AMOLED Column Driver IC Applications)

  • 김원강;안태지;이승훈
    • 전자공학회논문지
    • /
    • 제53권5호
    • /
    • pp.87-97
    • /
    • 2016
  • 본 논문에서는 시분할 기법을 적용하여 AMOLED 컬럼 구동회로용 DAC의 유효 채널 면적을 최소화한 2단 저항 열 기반의 10비트 DAC를 제안한다. 제안하는 DAC는 시분할 기법 기반의 DEMUX, 6비트 및 4비트의 2단 저항 열 구조를 기반으로 하는 롬 구조의 디코더를 2단계로 사용하여 기존의 디스플레이용 DAC보다 빠른 변환속도를 가지는 동시에 하나의 패널 컬럼 구동을 위한 DAC의 유효 면적을 최소화하였다. 두 번째 단 4비트 저항 열에서는 DAC 채널의 면적과 부하 영향을 줄이는 동시에 버퍼 증폭기로 인한 채널 간 오프셋 부정합을 제거하기 위해 기존의 단위-이득 버퍼 대신 간단한 구조의 전류원으로 대체하였다. 제안하는 1:24 DEMUX는 하나의 클록과 5비트 2진 카운터만을 사용하여, 하나의 DAC 채널이 24개의 컬럼을 순차적으로 구동할 수 있도록 하였다. 각 디스플레이 컬럼을 구동하는 출력 버퍼 입력 단에는 0.9pF의 샘플링 커패시터와 작은 크기의 source follower를 추가하여 top-plate 샘플링 구조를 사용하면서 채널 전하 주입에 의한 영향을 최소화하는 동시에 출력 버퍼의 신호정착 정확도를 향상시켰다. 제안하는 DAC는 $0.18{\mu}m$ CMOS 공정으로 제작하였으며, DAC 출력의 정착 시간은 입력을 '$000_{16}$'에서 '$3FF_{16}$'으로 인가했을 때 62.5ns의 수준을 보인다. 제안하는 DAC 단위 채널의 면적 및 유효 채널 면적은 각각 $0.058mm^2$$0.002mm^2$이며, 3.3V의 아날로그 및 1.8V의 디지털 전원 전압에서 6.08mW의 전력을 소모한다.

이갈이 진단 및 조절용 구내장치의 개발과 신뢰도 조사 (Development and Reliability of Intraoral Appliance for Diagnosis and Control of Bruxism)

  • 김성원;김미은;김기석
    • Journal of Oral Medicine and Pain
    • /
    • 제30권1호
    • /
    • pp.69-77
    • /
    • 2005
  • 이갈이 치료에 가장 널리 이용되고 있는 구내교합장치는 치아와 턱관절 및 주위조직을 보호함으로써 이갈이 때문에 발생하는 여러 합병증을 예방하는 것을 주목적으로 하지만, 이갈이 억제에 있어서는 일시적인 증상감소의 효과만을 가질 뿐이므로 환자 스스로가 이갈이를 인지하여 습관을 중단할 수 있도록 하기 위한 특수한 장치의 개발이 시도되고 있다. 본 연구에서는 소형 방수 스위치를 이용하여 구내장치에 들어가는 부품을 최소화하고 전원의 사용시간을 최대화 함으로서 상품화 가능한 이갈이 진단 및 조절용 장치(이하 이갈이장치)를 개발하여 소개하고, 임상적으로 사용하기 전 장치에 대한 신뢰도를 조사하고자 하였다. 새로 개발한 장치는 이갈이 센서인 소형 방수스위치로 구성된 정보입력부, 중앙정보처리장치(CPU)인 정보처리부, 이갈이 신호를 수신하는 정보저장부, 이갈이 신호에 대한 소리나 진동으로 반응하는 반응장치부 및 컴퓨터상에서 저장된 이갈이 정보를 표시하여 이갈이 빈도와 시간, 양태 등을 확인시켜주는 정보표시부로 구성되어 있다. 이 중에서 resin sheet로 만든 상하의 wafer 사이에 정보입력부인 스위치는 좌우 견치 설면에 고정하고 정보처리부 CPU는 구개중앙에 고정하여 구내교합장치를 제작한 한편, 여기에서 송신되는 정보는 별도의 외부 장치인 반응장치 및 정보저장장치에서 인식하여 feedback을 보낼 수 있도록 하였다. 장치제작의 신뢰도조사를 위해서는 단국대학교 치과대학 학생 중 정상교합을 가진 지원자 10명의 상악 석고모형에 대하여 두 명의 술자가 각각 이갈이장치를 제작하여 그 장치가 반응하는 힘의 크기를 비교하였으며(술자간 신뢰도조사), 또한 한명의 술자가 첫 회에 조사한 정보를 기억하지 못하게 약 2일의 시간 간격을 두고 각각 제작하고 그 장치가 반응하는 힘의 크기를 비교하였다(술자내 신뢰도조사). 술자간 및 술자내 조사에서 이갈이장치가 반응하는 최소의 수직력, 측방력, 중심력에서 모두 높은 상관관계를 보였으며 측정된 값에 있어 서로 유의한 차이를 보여주지 않았다. 새로 개발한 이갈이장치는 부품을 소형화하였으며 제작이 편리하고 구강내에서 안전하게 사용할 수 있을 뿐만 아니라 전원의 사용시간을 최대로 할 수 있다는 장점을 가지고 있으며 술자간 및 술자내 신뢰도 조사를 통하여 임상에 적용가능한 높은 재현성을 확인할 수 있었다. 결론적으로 이 장치는 정보처리 및 저장장치가 있고 음향이나 진동을 이용한 바이오피드백 기능을 가지고 있어 이갈이 환자의 진단과 조절에 임상적으로 유용하게 사용될 수 있을 것으로 생각된다.

A MEASUREMENT OF THE COSMIC MICROWAVE BACKGROUND B-MODE POLARIZATION WITH POLARBEAR

  • ADE, P.A.R.;AKIBA, Y.;ANTHONY, A.E.;ARNOLD, K.;ATLAS, M.;BARRON, D.;BOETTGER, D.;BORRILL, J.;CHAPMAN, S.;CHINONE, Y.;DOBBS, M.;ELLEFLOT, T.;ERRARD, J.;FABBIAN, G.;FENG, C.;FLANIGAN, D.;GILBERT, A.;GRAINGER, W.;HALVERSON, N.W.;HASEGAWA, M.;HATTORI, K.;HAZUMI, M.;HOLZAPFEL, W.L.;HORI, Y.;HOWARD, J.;HYLAND, P.;INOUE, Y.;JAEHNIG, G.C.;JAFFE, A.H.;KEATING, B.;KERMISH, Z.;KESKITALO, R.;KISNER, T.;JEUNE, M. LE;LEE, A.T.;LEITCH, E.M.;LINDER, E.;LUNGU, M.;MATSUDA, F.;MATSUMURA, T.;MENG, X.;MILLER, N.J.;MORII, H.;MOYERMAN, S.;MYERS, M.J.;NAVAROLI, M.;NISHINO, H.;ORLANDO, A.;PAAR, H.;PELOTON, J.;POLETTI, D.;QUEALY, E.;REBEIZ, G.
    • 천문학논총
    • /
    • 제30권2호
    • /
    • pp.625-628
    • /
    • 2015
  • POLARBEAR is a ground-based experiment located in the Atacama desert of northern Chile. The experiment is designed to measure the Cosmic Microwave Background B-mode polarization at several arcminute resolution. The CMB B-mode polarization on degree angular scales is a unique signature of primordial gravitational waves from cosmic inflation and B-mode signal on sub-degree scales is induced by the gravitational lensing from large-scale structure. Science observations began in early 2012 with an array of 1.274 polarization sensitive antenna-couple Transition Edge Sensor (TES) bolometers at 150 GHz. We published the first CMB-only measurement of the B-mode polarization on sub-degree scales induced by gravitational lensing in December 2013 followed by the first measurement of the B-mode power spectrum on those scales in March 2014. In this proceedings, we review the physics of CMB B-modes and then describe the Polarbear experiment, observations, and recent results.

하저 지반특성 규명을 위한 수상 전기비저항 탐사에 관한 연구 (A Study on the DC Resistivity Method to Image the Underground Structure Beneath River or Lake Bottom)

  • 김정호;이명종;송윤호;조성준;이성곤;손정술;정승환
    • 지구물리와물리탐사
    • /
    • 제5권4호
    • /
    • pp.223-235
    • /
    • 2002
  • 수로는 약선대를 따라 형성되는 경우가 많으며, 특히 강을 따라 단층이 발달하는 경우가 많다. 교량과 같은 수상 구조물의 건설을 위하여 탐사의 필요성이 높음에도 불구하고 육상과는 달리 수상 전기비저항 탐사가 활발하게 적용되지 못한 것은 현장탐사와 자료해석의 어려움 때문이었다고 볼 수 있다. 그러나 무엇보다도 중요한 것은 양질의 자료 획득이며, 양질의 자료 획득이 육상 탐사보다 어려운 것은 영상화하고자 하는 지하구조가 물로 덮여 있다는 점에서 연유한다. 이 연구에서는 이와 같은 점에 중점을 두고 수치 모델링과 현장탐사 사례 분석을 통하여 수상 전기비저항 탐사 자료의 특성, 현장 탐사와 해석 방법에 대하여 논하였다. 수상 전기비저항 탐사는 전극이 물 표면에 혹은 물 바닥에 설치되어 있는가에 따라 탐사자료의 획득방법, 고려할 사항, 해석 방법이 달라지므로, 전극을 물 표면에 띄운 경우와 바닥에 설치한 경우로 나누어 논의를 전개하였다. 이를 통하여 하상 전기비저항 탐사는 수층 하부 지반을 정확하게 영상화할 수 있음을 보였다. 또한 수상 전기비저항 탐사에서 전극을 물 바닥에 설치하는 것이 물 표면에 설치하는 것보다 훨씬 더 분해능이 높은 영상을 획득할 수 있다. 그러나 두 방법 모두 육상 탐사에 비하여 지하구조에 대한 민감도는 낮고, 유동전위 등에 의하여 전기잡음이 높을 가능성이 높기 때문에 육상 탐사보다 높은 S/N 비를 갖는 현장 탐사자료의 획득이 필수적이며 가능한 한 높은 분해능을 갖는 전극배열을 선택하여야 하는 것으로 나타났다. 변형된 전극배열법은 원거리 접지가 불필요하다는 점과 아울러 그의 원천이 되는 전극배열보다 높은 신호대 잡음비를 갖는 자료 획득이 가능하다는 점에서 수상 전기비저항 탐사에 많은 활용이 기대된다.

스트리머 전기비저항 탐사에 의한 하저 단층 탐지 (Delineation of a fault zone beneath a riverbed by an electrical resistivity survey using a floating streamer cable)

  • 권형석;김정호;안희윤;윤진성;김기석;정치광;이승복
    • 지구물리와물리탐사
    • /
    • 제8권1호
    • /
    • pp.50-58
    • /
    • 2005
  • 하저지반은 단층대의 분포가능성이 매우 높으나 수층으로 인해 지표지질조사가 불가능하여 단층대를 파악하기가 쉽지 않다. 하상 전기비저항 탐사는 하저지반에 대한 연속적인 영상을 제공하여 주므로 단층이나 연약대의 위치를 파악하는데 매우 효과적인 탐사법이다. 하저터널의 설계에서는 단층대의 위치뿐만 아니라 단층대의 주향방향이 매우 중요한 요소이다. 단층대의 주향방향을 파악하는 방법으로는 격자형의 측선에 대한 광대역 조사가 매우 효과적이다. 하지만. 종래의 하상 전기비저항 탐사는 케이블을 하저에 설치하여야 하므로 광대역 조사에 적합하지 않다. 이에 이 연구에서는 소형보트에 스트리머 케이블을 설치하여 신속하게 광대역의 하저지반을 영상화하는 스트리머 전기비저항 탐사의 적용성에 대해 고찰하였다. 스트리머 전기비저항 탐사에 의한 단층대의 분해능을 고찰하기 위하여, 수직단층이 수층 하부의 퇴적층에 피복되어 있는 모형을 설정하여 수치모형실험을 수행하였다. 전극의 설치위치와 수심의 변화에 따른 수직단층의 분해능에 대해 살펴보았으며, 그 결과 수층의 두께가 전극간격의 2 배 이내인 경우에는 전극을 수층 표면에 설치하는 방식으로도 단층을 영상화할 수 있음을 보였다. 또한, 스트리머 전기비저항 탐사에 적합한 4 가지의 전극배열법을 설정하여 신호대 잡음비와 수직 단층의 분해능을 비교 검토하였다. 수치모형실험을 기초로 하여 한국 서울에 위치한 한강의 하저터널 예정부지에서 하상 전기비저항 탐사를 수행하였다. 하저터널 예정노선에서는 고분해능의 영상이 요구되므로 하저에 전극을 설치하여 자료를 획득하였으며, 2차원 역산을 적용하여 강 양단에서 단층대로 추정되는 3개의 저비저항 이상대를 탐지하였다. 저비저항 이상대의 윈인을 규명하기 위하여 시추조사를 수행하였으며, 그 결과 수 m 이상의 폭을 가지는 다수의 단층이 관측되었다. 단층대의 주향방향을 탐지하기 위하여 확인된 저비저항 이상대를 중심으로 격자형의 측선을 설정하여 스트리머 전기비저항 탐사를 수행하였다. 이를 통해 하저에 케이블을 설치하는 방식에 비해 매우 신속하고 경제적으로 하저에 분포하는 이상대의 분포범위와 발달방향을 규명할 수 있었다.