• KIEE International Transactions on Power Engineering
• /
• 제5A권3호
• /
• pp.280-285
• /
• 2005

This paper proposes a novel method for determining the kind and rating of power quality solutions. To determine the kind of solution, event cause and direction are utilized. According to the event cause and direction, an adequate type of solution is determined for effective compensation. To rate the required capacity of solution, the concept of lost energy is adopted. Lost voltage, lost power and lost energy are calculated and the rating of the solution is determined to compensate a specific event. The rating method that utilizes the result of stochastic diagnosis is also proposed. A power quality index such as CP95 is adopted for solution suggestion. The method developed in this paper is applied to the test system and proved to be useful for enhancing the power quality of the customer system. It can provide customers with information pertaining to what is a proper and cost-effective solution among various compensating devices.

• 품질경영학회지
• /
• 제18권1호
• /
• pp.116-128
• /
• 1990

Consumer's demand level for products and goods selection power is considerably improved. The pressure of loss compensation is also being accelerated by products which bring damage on property. The producer prevents the loss from causing poor products and considering the quality cost allotment in these circumstances. That is to say, producer should be concerned with the strategy of product liability prevention instead of passive defence policy. This paper intends to estabilish the optimum quality cost in considering product liability, and present the correlation of quality cost elements and multiple regression analysis. It can utilized in qualitycost and budget planning.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.293-300
• /
• 2021

본 연구에서는 SCDF를 사용하여 전력공급의 가치를 산정하고, 부하점별 중요도를 다면적인 평가를 하는 방법을 제시한다. 이의 방법으로 지속정전, 순간정전, 전압 Sag/Swell에 대응할 수 있는 SCDF를 제공하고, 이 SCDF를 사용하여 정전과 관련하여 어느 부하점에 어느 정도의 비용이 발생하는지를 계산하였으며, 이들 비용을 다면평가를 통해 어느 부분이 어느정도 취약한지를 평가하고 어느 부분의 확장이 필요한 지를 수치적으로 설명할 수 있도록 하였다. 본 연구를 우리나라의 실배전계통에 적용하여 평가하고 유용성을 검증하였다.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1054-1065
• /
• 2015

Multi-functional voltage source inverters (VSIs) have attracted increasing attention in recent years for their advantageous auxiliary services for power quality enhancement in autonomous microgrids. These types of VSIs can not only achieve a proper control scheme in autonomous mode but also cope with the prescribed power quality and stability requirements. These functionalities are integrated within the same device, thereby significantly improving the cost-effectiveness of microgrids while decreasing the investment and bulk compared with those of multiple devices with independent functionalities. Control strategies for power quality enhancement in autonomous microgrids using multi-functional VSIs are comprehensively reviewed in this paper. In addition, such VSIs are discussed in detail, and comparisons of which are also provided. Lastly, a number of future research directions for multi-functional VSIs are recommended.

• 전자공학회논문지
• /
• 제50권9호
• /
• pp.144-155
• /
• 2013

본 논문에서는 안드로이드 앱과 TI 320F28335 MCU를 활용한 마이크로그리드용 저가형 원격 전원품질이상 감시 시스템(Remote Power-quality-failure Monitoring System : RPMS)을 제안한다. 설계한 RPMS 테스트 베드는 스마트 노드와 서버 그리고 안드로이드 앱으로 구성된다. 특별히 RPMS 스마트 노드는 기존 감시 시스템과는 달리 C2000 계열 MCU를 이용한 저가형으로 설계되며 전력신호처리를 위한 신호처리 기능과 함께 전원품질 모니터링 정보 전송을 위한 데이터 전송 기능을 포함한다. 전력신호처리 기능은 순시전압강하, 순시전압상승 혹은 순시정전에 대한 웨이브렛 기반 검출 알고리즘과 고조파에 대한 FFT 기반 검출 알고리즘을 구현하며, 이를 이용 신뢰성 있는 실시간 전원품질 감시를 가능하게 한다. 데이터 전송 기능은 전원품질 원격 감시를 위한 저 복잡도의 전용 전송 프로토콜 알고리즘을 구현하며, 품질이상 검출 메시지 전송을 위한 간단한 데이터 포맷 (msg_Diag)을 정의 사용한다. 스마트 노드 측정 결과는 서버는 물론 WiFi (혹은 WAN) 망에 연동되는 안드로이드 폰으로 전송되어 실시간 원격 모니터링을 가능하게 한다. RPMS 테스트 베드의 서버와 노드 간 통신에는 RS-232 혹은 블루투스의 유 무선통신을 이용하며, 노드에 구현된 전원품질이상 검출 알고리즘은 CCS (Code Composer Studio) 3.3 환경하에 C 언어로 구현한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권2호
• /
• pp.53-58
• /
• 2006

This paper proposes a small low-cost power quality compensator to be installed at the electricity supply inlet of residential customer. The compensator is composed of a single-phase active power filter with a simple controller using analog electronics, which can correct the power factor and damp out the harmonics. The operation and performance of proposed compensator was verified through simulations with PSCAD/EMTDC and experimental works with hardware prototype. The proposed compensator can offer reduction of power loss and improvement of power quality to the residential customer.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1348-1357
• /
• 2015

Under traditional unified power quality conditioner (UPQC) control, a UPQC series converter (SC) is mainly used to handle grid-side power quality problems while its parallel converter (PC) is mainly used to handle load-side power quality problems. The SC and PC are relatively independent. The SC is usually in standby mode and it only runs when the grid voltage abruptly changes. In this paper, novel UPQC coordinated control strategies are proposed which use the SC to share the reactive power compensation function of the PC especially without grid-side power quality problems. However, in some cases, there will be a circulating current between the SC and the PC, which will probably influence the compensation fashion, the compensation capacity, or the normal work of the UPQC. Through an active power circulation analysis, strategies with and without a circulating current are presented which fuses the reactive power allocation strategy of the SC and the PC, the composite control strategy of the SC and the compensation strategy of the DC storage unit. Both of the strategies effectively solve the SC long term idle problem, limit the influence of the circulating current, optimize all of the UPQC units and reduce the production cost. An analysis, along with simulation andexperimental results, is presented to verify the feasibility and effectiveness of the proposed control strategies.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.962-969
• /
• 2000

Quality that character of energy is the same at every state in case of equal working fluid and net concept of material flow was applied to thermoeconomics about energy system, and we could naturally explain the suitable degree about this concept, also thermoecomic equations about general power plant was easily deduced. And deduced equations exactly corresponded with principle of thermoeconomics that overall input cost flow rate equal overall output cost flow rate. This equations is applied to gas turbine cogeneration power plant as one example and found the product unit cost. Also this product cost comparison could been naturally explained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.79-82
• /
• 2002

Non-linear loads are the sources of power systems harmonics, and the power quality is influenced by harmonics, Recently, the requirements of power quality is important. For the power quality problems. it is very important that the development of power measurement circuit for non-linear load. In this paper, it is discoursed on that high speed sampling circuit and efficient power analysis algorithms. The sampling circuit is implemented using FPGA. Since the power measurement circuit system is composed by FPGA and efficient power algorithms. it is practicable application that accurate power measurement, stable protection relaying, and low cost system configuring.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.60-67
• /
• 1998

Edge detection is the first step and very important step in image analysis. We cast edge detection as a problem in cost minimization. This is achieved by the formulation of a cost function that evaluates the quality of edge configurations. The cost function can be used as a basis for comparing the performances of different detectors. This cost function is made of desirable characteristics of edges such as thickness, continuity, length, region dissimilarity. And we use a simulated annealing algorithm for minimum of cost function. Simulated annealing are a class of adaptive search techniques that have been intensively studied in recent years. We present five strategies for generating candidate states. Experimental results(building image and test image) which verify the usefulness of our simulated annealing approach to edge detection are better than other operator.