• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2026-2028
• /
• 2000

As the results of evaluation of its performance for 300 kN Ball and Socket type suspension insulators. There was electrically internal puncture of the solid insulating body of the insulating due to the steep front impulse voltage, which usually occurs puncture before external flash-over of insulators, moreover we have obtained satisfactory results in power arc test of 7.2kA cycle fatigue test with high qualify control index of 4.6, especially we have obtained more satisfactory results than that before improvement of its materials.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.246-249
• /
• 2003

For quite a long time various researches and developments of superconducting magnetic energy storage(SMES) device for enhancement of power qualify control of sensitive electric load. This paper describes the design, fabrication and experimental results for the 3MJ SMES magnet made by using the design code of a SMES device that we developed. A computer code was developed to find the parameters of the SMES magnet which has minimum amount of superconductor for the same stored energy, and the 3MJ SMES magnet was designed based upon that. And 3MJ SMES magnet made base of several research result which was ramp up to 1㎄ without quench.

• Journal of Information Technology Applications and Management
• /
• 제13권4호
• /
• pp.215-235
• /
• 2006

Recently, Development of IT and digital-tech, and this is becoming factor of digital contents industry development. But, problem that is more suitable e-business model's necessity and quality enemy of distribution web-site to digital contents as transaction this firm dispute by transaction special quality and Payment-system increase of digital contents increases rapidly was risen. In this study, Digital Contents qualify estimation very important persons of digital contents as sequence of study that investigate from target's viewpoint which is serviced through web-site that digital contents is not factors of web-site service method whether digital contents distribution web-site factors effect that is some in customer satisfaction from general viewpoint of actuality digital contents distribution and is the actual proof enemy. This paper's goal that these study finding leads as digital contents industry discusses individual enterprise's success and failure as field of business in quickening period yet but domestic digital contents industry field will be roared and may can have competitive power by enterprises which wish to already started business or inaugurate an enterprise enter in field with successful beginning and direction and develop continuously.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.276-279
• /
• 2001

Direct torque control(DTC) is known to produce quick response in ac drives. Some drawbacks of the classical DTC are the relatively large torque ripple in a low speed range and notable current pulsation during steady state. They are reflected speed response and increased acoustical noise. In this paper, The DTC quick response are preserved at transient state, while better qualify steady state performance is produced by Space Vector Modulation(SVM). It is able to reduce the acoustical noise, torque ripple and current pulsation during steady state. The system presented are closed loop stator flux and torque observer for wide speed range that inputs are currents and voltages sensing of motor terminal. Simulation results for the 2.2kw general purposed induction motor are presented and discussed.

• 동력기계공학회지
• /
• 제12권3호
• /
• pp.19-25
• /
• 2008

This paper deals with the heat transfer and pressure drop characteristics of R-290 (Propane), R-600a (Iso-butane) and R-1270 (Propylene) as an environment friendly refrigerant and R-22 as a HCFC's refrigerant for condensing. The test section is a horizontal double pipe heat exchanger. Condensing heat transfer and pressure drop measurements were Peformed for 12.70 mm micro-fin tube and compared with the results in smooth tube. The local condensing heat transfer coefficients of hydrocarbon refrigerants were superior to those of R-22 and the maximum increasing rate of heat transfer coefficient was found in R-600a. The average condensing heat transfer coefficients in hydrocarbon refrigerants showed 20 to 28% higher values than those of R-22. Hydrocarbon refrigerants have a higher pressure drop than that of R-22 with respect to refrigerant qualify and mass flux. Also, the condensing heat transfer coefficient and pressure drop of working fluids in smooth and micro-fin tube were compared. The heat transfer enhancement factor (EF) between smooth and micro-fin tube varied from 2.2 to 2.6 in all experimental conditions.

• 항공우주기술
• /
• 제3권1호
• /
• pp.232-241
• /
• 2004

항공우주연구원에서는 KSLV용 추진기관 종합시험설비를 구축, 운영함으로써 발사체 추진기관의 각 구성품의 조립성 및 시스템 적합성을 검증하고, 연소시험을 포함한 각종 시험을 통해 구성품의 성능 확인 및 추진기관 시스템에 대한 종합적 인증(Qualification)을 하고자 한다. 아울러 발사 환경을 모사할 수 있어, 추진기관 구성품 및 시스템의 최종 환경시험이 가능할 뿐 아니라 발사시 추진기관의 성능을 예측할 수 있다. 본 논문에서는 상기 목적을 위해 구축되는 추진기관 종합시험 설비(Integrated Power Plant Test Facility)의 개념설계(Conceptual Design Analysis)과정을 통해 도출된 설계 개념을 정리하여 기술하고자 한다.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.203-213
• /
• 2017

Magnetically suspended control & sensitive gyroscope (MSCSG) is a novel type of gyroscope with the integration of attitude control and attitude angular measurement. To improve the precision and reduce the power consumption of Lorentz Force-type Magnetic Bearing (LFMB), the air gap flux density distribution of LFMB has been studied. The uniformity of air gap flux density is defined to qualify the uniform degree of the air gap flux density distribution. Considering the consumption, the average value of flux density is defined as well. Some optimal designs and analyses of LFMB are carried out by finite element simulation. The strength of the permanent magnet is taken into consideration during the machining process. To verify the design and simulation, a high-precision instrument is employed to measure the 3-dimensional magnetic flux density of LFMB. After measurement and calculation, the uniform degree of magnetic flux density distribution reaches 0.978 and the average value of the flux density is 0.482T. Experimental results show that the optimal design is effective and some useful advice can be obtained for further research.

• 조명전기설비학회논문지
• /
• 제20권6호
• /
• pp.87-95
• /
• 2006

본 연구에서는 부하의 변동 시에 고품질의 전력을 얻기 위하여 중성선과 전력선에 흐르는 각각의 영상 전류 성분과 제3고조파 전류 성분을 감소시킬 수 있는 Zig-Zag 변압기, 그리고 그 변압기의 2차측에 3상 브리지 정류기와 케패시터로 구성된 단상 능동 필터를 제작하였다. 이 단상 능동 필터를 변압기와 비선형 부하에 연결시켜 각 상에 보상 전류를 발생시킴으로써, 비선형 부하로 인하여 발생하는 제3고조파 성분을 감소시킬 수 있었다.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.595-603
• /
• 2010

In this paper, teaching in a "switching converter (SC) design" course using problem-based learning (PBL) with dynamicbehavior- model simulation, given at Lunghwa University of Science and Technology (LHU), Taiwan, is proposed. The devised methodology encourages students to design and implement the SCs and regulate the controller's parameters in frequency domain by using 'sisitool' ('bode') in the MATLAB toolbox. The environment of PBL with converter characterization modeling and simulation reforms the learning outcome greatly and speeds up the teaching-learning process. To qualify and evaluate the learning achievements, a hands-on project cooperated with the continuous assessment approach is performed to modulate the teaching pace and learning direction in good time. Results from surveys conducted in the end of the course provided valuable opinions and suggestions for assessing and improving the learning effect of the proposed course successively. Positive feedbacks from the examinations, homework, questionnaires, and the answers to the lecturer's quizzes during class indicated that the presented pedagogy supplied more helpfulness to students in comparisons with conventional teaching paradigm, their learning accomplishments were better than expected as well.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.131-141
• /
• 2007

본 논문에서는 병렬 인버터를 통한 고조파 보상은 물론 직렬 인버터로 전압강하 보상 및 부하불평형 문제도 해결할 수 있는 보상설비에 대하여 특성을 분석하였다. 제안하는 설비의 구조와 제어방법을 제시하고, 제어방법의 효과를 검증하기 위하여 전기철도 급전시스템과 보상설비를 모델링하여 모의계산을 수행하여 그 결과를 제시하였으며, 본 논문에서는 기존의 급전선로 전압강하 보상시스템의 단점을 보완하기 위해 DC-Link를 공유하는 직렬과 병력형 인버터를 Scott 변압기 2차 측의 T상과 M상에 두어 다양한 보상 특성을 확인하였다. 본 논문에서 제안하는 시스템은 급전선로의 전기차로 인해 발생하는 고조파전류를 병력인버터를 통해 제거하여 154[kV] 3상 모선으로의 유임을 차단하게 된다. 또한 모선의 선간단락, 일선지락 등의 사호로 발생되는 급전선로의 순간전압강하 혹은 순간전압상승 등을 보상하여 지속적인 전압공급을 가능하게 됨을 확인하였다. 더불어 철도의 기동 등으로 인한 순간적인 전압의 강하에 있어서도 직렬인버터를 통한 보상으로 인해 전압의 지속적인 유지를 확보할 수 있음을 확인하였다. 본 논문에서는 이러한 다양한 보상동작을 수행한 수 있는 제안된 시스템의 동작을 PSCAD/EMTDC를 통해 검증하였으며, 향후 시스템 제작에 따른 특성분석에 용이하게 적용될 것으로 보인다.