• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.259-264
• /
• 2002

In this study, sintering properties of Artificial Lightweight aggregates(ALAs) prepared from coal ash as a function of sintering temperature (900$^{\circ}$C, 1000$^{\circ}$C, 1100$^{\circ}$C) and time (2min, 5min, 10min) when limestone added as lightweight mineral was investigated. Increasing the sintering temperature resulted simultaneously from a decline of quartz mineral as well as growth of mullite mineral. Addition of limestone to ALAs newly formed sintered minerals such as clinoptilolite and plagioclase. Sintering effect of ALAs prepared from coal ash and limestone was more affected by a sintering temperature than time. As sintering temperature and time increae, transition of macropore to micropore and formation of closed pores were happened, consequently shrank the total pore volume of ALAs. The surface of ALAs sintered at 1000$^{\circ}$C for 5min was nearly not detected open pores due toe amalgamation effect of molten slag layer but homogeneous distributions of closed pores with micro-scale were examined in cross sectional area ALAs. Sintering temperature and time which present the most adequate state, in the preparation of ALAs, are corresponded to 1000$^{\circ}$C and 5min, respectively.

• Journal of the Korean earth science society
• /
• v.32 no.2
• /
• pp.170-179
• /
• 2011

Fly ashes derived from coal fired power plants have unique chemical and mineralogical characteristics. The objective of this research was to study how indigenous bacteria affected heavy metal leaching in fly ash slurry during the fly ash-seawater interactions in the ash pond located in Yeongdong seashore, Korea. The in-situ pH of ash pond seawater was 6.3-8.5. For this study, three sites of the ash pond were chosen to collect a sample of fly ash slurry. Three samples that had a mix of fly ash (0.4 L) and seawater (1.6 L) were collected at each site. First sample was autoclaved ($120^{\circ}C$, 2.5 atm), second one was inoculated with glucose to stimulate the microbial activity, and the last sample was kept in the natural condition. Compared with other samples including autoclaved and natural samples, the glucose added sample showed sharp increase in its alkalinity after 15 days, cation concentration change such as Ca, Mg, and K seemed to increase in early stage, and then decrease 15 days later in slurry solution of glucose added sample, and a possibly considerable decrease in $SO_4^{2-}$ in the fly ash slurry samples when glucose was added to stimulate the microbial activity. Geochemical data of this study is likely to be related to the activity of bacteria at the ash pond. The result may be used to understand about the characteristic of bacteria.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.115-122
• /
• 2018

In this paper, the feasibility of recycling concrete waste as a method to reduce final disposal amount of wastes generated through decommissioning of nuclear power plant has been analyzed based on experimental results of existing literature. When recycled concrete waste was used as recycled aggregate, it was investigated through literature that the concrete strength decreased by 30~40% depending on the mixing ratio. It was also investigated that concrete with recycled aggregate can be used as a structural material when the quality of recycled aggregate is well managed since no significant problem was found. When recycled cement produced from concrete waste was used, the strength of concrete or mortar decreased considerably as the recycled cement content increased. Therefore, it can be concluded that concrete or mortar with recycled cement can be used as a filling material for final disposal of large radioactive waste rather than for structural use. This paper is expected to be useful for reduction on disposal volume and decommissioning cost for nuclear power plants such as Kori 1.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.563-569
• /
• 2018

This paper is on the implementation of a system for automatically monitoring window farm hydroponics based on Arduino (utilizing Arduino's open source code) emerging as the icon of the Fourth Industrial Revolution. A window farm, which means window-type hydroponics, is offered as an alternative to fulfill the desires of people who want to grow plants aside from the busy daily life in the city. The system proposed in this paper was developed to automatically monitor a window farm hydroponics cultivation environment using the Arduino UNO board, a four-charmel motor shield, temperature and humidity sensors, illumination sensors, and a real-time clock module. Modules for hydroponics have been developed in various forms, but power consumption is high because most of them use general power and motors. Since it is not a system that is monitored automatically, there is a disadvantage in that an administrator always has to manage its operational state. The system is equipped with a water supply that is most suitable for a plant growth environment by utilizing temperature, humidity, and light sensors, which function as Internet of Things sensors. In addition, the real-time clock module can be used to provide a more appropriate water supply. The system was implemented with sketch code in a Linux environment using Raspberry Pi 3 and Arduino UNO.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.660-667
• /
• 2018

This study examined the optimal manufacturing conditions of RDF using heat-dried sludge from sewage treatment plant in Cheonan with the oil-drying method. The amounts of oil evaporation and oil drying of the heat-dried sludge were measured at different temperatures to evaluate the value of the product. The performance of the product was then measured using a calorimeter and TGA. In addition, the concentration of odor, NH3, H2S, and TVOC during drying was determined using a portable odor-meter. Ingredient analysis was performed by EDS. Considering mass-production, the oil to heat-dried sludge weight ratio was fixed to 4:1. At $130^{\circ}C$, only physical mixing occurred after the instantaneous drying of internal water. Considering the eco-friendly aspects, there was no significant difference in the drying efficiency between $160^{\circ}C$ and $190^{\circ}C$. Therefore, the optimal conditions were a drying temperature of $160^{\circ}C$ within 5 minutes. Finally, the RDF manufactured in this study and fuel used in the thermal power plants were compared. The calorific value was 4,449kcal/kg, the water content was 2% and the ash content was 34%, which is higher than the fuel of thermal power plants. Therefore, it is believed that coal energy as well as wood pellets can be replaced.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.131-138
• /
• 2010

To obtain basic data on the use of lotus as a raw material in functional food, antioxidant and anticancer activities of the leaf and root were investigated. Total flavonoid and total phenolic contents, at 12.84 mg/g and 24.33 mg/g respectively, were higher in white lotus leaf (WLL) than in any other part of the plant. The radical-scavenging activity of different tissues of lotus, measured in the DPPH radical-scavenging assay, increased with higher concentrations of solvent fractions. The butanol fraction of white lotus leaf showed the highest DPPH radical-scavenging activity. The reducing power of fractions increased in a dose-dependent manner. The butanol fraction of WLL had the greatest reducing power, and showed strong antioxidant activity in the linoleic acid system, and high-level inhibition of tyrosinase. Fractions from lotus were also capable of scavenging nitrite, depending on the concentration of the fractions. Butanol fractions of the leaf of white and red lotus scavenged 95.61% and 92.15% of available nitrite, respectively, when used at 1 mg/mL concentrations. Butanol fractions from leaf of white and red lotus exhibited the strongest inhibitory effects on human lung and colon cancer cells.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.939-946
• /
• 2011

In thermal power generation companies, the recycling of refined ash (LOI < 6%) obtained from a PC-firing furnace is beneficial for the companies, e.g., it can be used for making lightweight aggregates. However, ash having a high LOI, which cannot be reused, is still buried in the ground. To obtain refined ash, the re-burning of high-LOI ash (LOI > 6%) in a PC-firing furnace can be an alternative. In this study, a numerical analysis was performed to demonstrate the effects of ash re-burning. An experimental constant value was decided by TGA (thermo-gravimetric analysis), and a DTF (drop-tube furnace) was used in the experiment for calculating the combustion of ash. On the basis of the trajectory of the moving particles of coal and ash, it was concluded that supplying ash near the burner, which is located high above the ground, is appropriate. On the basis of numerical results, it was concluded that an ash supply rate of 6 ton/h is suitable for combustion, without affecting the PC-firing boiler.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.1
• /
• pp.97-106
• /
• 1996

Macroalgal community was analysed from December 1993 to October 1994 in Yonggwang vicinity, western coast of Korea. A total 51 species (12 green, 11 brown and 29 red algae) of marine algae were identified. Among four localities, the number of species observed was the highest as 34 species at Shimwon and the least as 31 species at Sunchanggum and Gamakdo. Seasonally, the number of species observed was the highest as 42 species in winter and the least as 18 species in summer. The species showing relatively high important value were Enteromorpha compressa, Sargassum thunbergii, Corallina pilulifera and Carpopeltis affinis, which were all common to four investigated localities. Seasonal and regional fluctuations of mean biomass was $66.0\~820.0\;g-wet\;wt/m^2$ at Hyanghado, $248.3\~886.3\;g-wet\;wt/m^2$ at Sunchanggum, $154.5\~510.2\;g-wet\;wt/m^2$ at Gamakdo and $85.0\~451.9\;g-wet\;wt/m^2$ at Shimwon, respectively. The flora investigated could be classified into six functional groups such as coarsely branched form $(41.2\%)$, sheet form $(25.5\%)$, filamentous form $(19.6\%)$, thick leathery $(7.8\%)$, crustous form $(3.9\%)$ and jointed calcarious form algae $(2.0\%)$. At the effluent area of the nuclear power plants, the algal composition of functional groups may affect species composition due to thermal pollution.

• The Korea Journal of Herbology
• /
• v.31 no.5
• /
• pp.107-114
• /
• 2016

Objectives : Poria cocos Wolf has been widely used in Korean medicine as a medicinal fungus. In this study, we investigated that comparative anti-oxidant effects of ethanol extract from wild Poria cocos (WP) and plastic bag-cultivated Poria cocos (PBP).Methods : Total polyphenol and flavonoid contents in WP and PBP extract were monitored. And DPPH, ABTS, hydroxyl (·OH) free radical scavenging capacity, reducing power and xanthine oxidase inhibition activities of them were determined at 5, 1, 0.5 mg/ml concentrations.Results : Higher total polyphenol contents were found in the PBP extract (52.07±0.6 mg/TAEg) than in the WP extract (28.44±0.26 mg/TAEg). The flavonoid contents in WP and PBP extract were 17.29±0.30 mg/ RUEg, 21.36±0.40 mg/ RUEg, respectively. Also, DPPH, ABTS and ·OH free radical scavenging capacity of PBP extract in treated concentrations (5, 1, 0.5 mg/ml) significantly increased compared to those of WP-treated group. In particular, DPPH, ABTS free radical scavenging capacity and reducing power of PBP extract at 5 mg/ml concentration were similar to positive control (BHA or vit. C). Xanthine oxidase (XO) inhibition rate in both extract increased dose dependently. But it was significantly increased in PBP-treated group, only at 5 mg/ml, compared to those of WP-treated group. Then, their inhibition rate by PBP was similar to positive control (BHA).Conclusions : These results suggest that PBP extract is superior to WP extract in anti-oxidant capacity thus PBP can be applied in variable antioxidative products as a substitute for WP.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.168-176
• /
• 2020

Reactive oxygen species (ROS) damage DNA and cause cancer. Therefore, the research is being conducted on the development of antioxidants for the removal of ROS. This study was performed to investigate antioxidant activity and protective effect against oxidative DNA damage using ethyl acetate fractions from the cone of Pinus rigida × taeda (ERT). The antioxidant activity was evaluated using the DPPH, ABTS radical scavenging assay, reducing power assay, and Fe2+ chelating assay. Also, the contents of phenolic compounds and vitamin C related to antioxidant activity were analyzed to confirm phytochemicals. The DNA protective effect against oxidative stress was confirmed by the φX-174 RF I plasmid DNA cleavage assay. As a result, ERT showed DPPH and ABTS radical scavenging activities in a concentration-dependent manner. The results of reducing power and Fe2+ chelating activities were 77.32 ± 2.28% and 64.09 ± 1.01% at 200 ㎍/㎖. Also, ERT showed a DNA protective effect against oxidative stress.