• Structural Engineering and Mechanics
• /
• 제53권6호
• /
• pp.1167-1182
• /
• 2015

In this study, the stresses and electric potential redistributions of a cylinder made from functionally graded piezoelectric material (FGPM) are investigated. All the mechanical, thermal and piezoelectric properties are modeled as power-law distribution of volume fraction. Using the coupled electro-thermo-mechanical relations, strain-displacement relations, Maxwell and equilibrium equations are obtained including the time dependent creep strains. Creep strains are time, temperature and stress dependent, the closed form solution cannot be found for this constitutive differential equation. A semi-analytical method in conjunction with the Mendelson method of successive approximation is therefore proposed for this analysis. Similar to the radial stress histories, electric potentials increase with time, because the latter is induced by the former during creep deformation of the cylinder, justifying industrial application of such a material as efficient actuators and sensors.

• 한국지반환경공학회 논문집
• /
• 제6권1호
• /
• pp.53-62
• /
• 2005

본 연구에서는 수도권매립지의 신선한 쓰레기 매립층의 장기침하거동 특성을 규명하기 위해 매립시점부터 설치, 관리되어 온 180여개의 침하판을 대상으로 약 12년간에 걸쳐서 측정된 침하계측 결과에 대한 분석을 수행하였다. 국내 매립지의 침하계측자료와 외국매립지 침하자료들을 분석한 결과 외국 매립지의 압축률보다 다소 작게 측정되고 있으나, 상당히 근접하는 압축률을 보이고 있으며, 기존 장기침하 예측 모델을 적용하여 예측된 장기침하량 분석 결과 쌍곡선 모델, Gibson and Lo의 모델은 상당히 근접한 예측 결과를 나타내었으며, Bjarngard and Edgers 침하모델과 Power Creep Law 모델의 경우 침하계측 기간 동안은 침하자료와 잘 일치되는 경향을 보이나 장기침하량을 예측할 경우 다른 침하모델들에 비해 과다 예측됨을 알 수 있었다. 이외의 다른 예측식(Sowers, 대수함수)은 본 현장에는 적합하지 않은 것으로 사료된다.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.890-897
• /
• 2003

This paper compares engineering estimation schemes of C＊ and creep COD for circumferential and axial through-wall cracked pipes at elevated temperatures with detailed 3-D elastic-creep finite element results. Engineering estimation schemes included the GE/EPRI method, the reference stress method where reference stress is defined based on the plastic limit load and the enhanced reference stress method where the reference stress is defined based on the optimized reference load. Systematic investigations are made not only on the effect of creep-deformation behaviour on C＊ and creep COD, but also on effects of the crack location, the pipe geometry, the crack length and the loading mode. Comparison of the FE results with engineering estimations provides that for idealized power law creep, estimated C＊ and COD rate results from the GE/EPRI method agree best with FE results. For general creep-deformation laws where either primary or tertiary creep is important and thus the GE/EPRI method is hard to apply, on the other hand, the enhanced reference stress method provides more accurate and robust estimations for C* and COD rate than the reference stress method.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.171-178
• /
• 2002

An effect is made in this study to deepen understanding of small punch(SP) creep testing which has been a round for about 10 years as a substitute for the conventional uniaxial creep testing. Even though considerable numbers of SP creep test program have been performed, most of the tests were aimed at measuring creep rupture lives only. Very flew studies showed interest on the meaning of what we were really measuring during the SP creep tests. In this paper meanings of the parameters measured during the SP creep testing, such as punch load and punch displacement rate are investigated using finite element analysis. It was shown that the measured parameters must represent the stress and strain rates of the material at the annular region located at about 0.65 mm from the center of the SP specimen. The material in this location would go through constant maximum stress and strain rate during the testing. Experimental verification is also discussed.

• 한국지반공학회논문집
• /
• 제27권1호
• /
• pp.65-76
• /
• 2011

본 논문에서는 보강토 구조물의 장기거동에 관한 수치해석 내용을 다루었다. 본 연구는 사용연한동안 지속하중을 받는 보강토 구조물의 장기 변형 관련 메카니즘을 고찰하는데 주 목적을 두었다. 연구를 위해 먼저 Singh-Mitchell 크리프 모델과 멱함수(Power law) 크리프 모델을 이용하여 각각 뒤채움흙과 보강재의 크리프 변형을 모델링하는 방안을 구축하였으며 이를 토대로 뒤채움흙과 토목섬유 보강재의 크리프 특성에 대한 매개변수 연구를 수행하였다. 해석결과 외부하중을 받는 보강토 구조물이 세립분이 많이 포함되어 있는 흙으로 뒤채움이 될 경우 뒤채움흙과 토목섬유 보강재로부터 발생하는 크리프 효과로 인해 상당한 크기의 장기 변형이 발생할 수 있는 것으로 나타났다. 본 논문에서는 외부하중을 받는 보강토 구조물에 있어서 크리프 효과가 구조물의 사용성에 미치는 영향을 집중적으로 고찰하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.465-472
• /
• 2003

Creep Poisson's ratio reported by previous experimental studies on multiaxial creep of concrete was controversial. The Poisson's ratio is very sensitive to small experimental error that is inevitably induced, and the sensitivity may cause the controversy. It is difficulty to find out the properties on multiaxial creep of concrete. Therefore, a new approach method to analyze the test results is needed to precisely understand the properties on multiaxial creep of concrete. In this study, microplane model is used as a new approach method in analyzing the multiaxial creep test data. The six data sets extracted from the literature are fitted from regression analysis. Double-power law as a model representing volumetric and deviatoric creep evolutions on microplane is used, and six parameters in volumetric and deviatoric compliances are determined on the assumption that the volumetric and deviatoric creep strains are linearly proportional to corresponding stresses. The optimum fits give very accurate description of the test data. The Poisson's ratio calculated from the optimum fits varies with time and does not depends on the stress states, namely, uniaxial, biaxial, and triaxial stress states. Regression analysis is also performed on the assumption that the Poisson's ratio remains constant with titre. The constant Poisson's ratio can be use in practice without serious error.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.740-743
• /
• 1995

The analysis model is the power law creep material containing an elliptical rigid inclusion subjected to the arbitrarily directional stress on infinite boundary. The stress analysis is performed using the conformal mapping function and complex pseudo-stress function. The stress distributions near an elliptical rigid inclusion are obtained with various ellipse shapes, strain hardening exponents and directions of applied stress.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.94-101
• /
• 2003

The pressure tubes made of cold-worked Zr-2.5Nb alloy are subjected to creep deformation during service period resulting in changes to their geometry such as longitudinal elongation, diameter increase and sagging. To evaluate integrity of them, information on the material creep property of the serviced tubes is essential. As one of the methods with which the creep property is directly measured from the serviced components, small punch(SP) creep testing has been considered as a substitute for the conventional uniaxial creep testing. In this study, applicability of the SP creep testing to Zr-2.5Nb pressure tube alloy was studied particularly by measuring the power law creep constants, A, n. The SP creep test has been successfully applied fur other high temperature materials which have isotropic behavior. Since the Zr-2.5Nb alloy has anisotropic property, applicability of the SP creep testing can be limited. Uniaxial creep tests and small punch creep tests were conducted with Zr-2.5Nb pressure tube alloy along with finite element analyses. Creep constants obtained by each test method are compared. It was argued that the SP creep test result gave results reflecting material properties of both directions. But the equations derived in the previous study for isotropic materials need to be modified. Discussions were made fur future research directions for application of the SP creep testing to Zr-2.5Nb tube alloy.

• 지질공학
• /
• 제18권2호
• /
• pp.207-214
• /
• 2008

점토함량에 따른 미고결 이암의 시간 의존적 변형을 비교하기 위해 측방변형이 구속된 상태에서의 일축압밀시험을 수행하였다. 미고결 이암의 변형은 응력의 증가에 따른 즉각적인 변형과 일정한 응력 하의 크리프 변형으로 구분되었다. 응력 증가분이 동일한 경우에 시간 의존적 변형은 거의 일정한 크기로 발생하였으며 응력 증가분이 증가할수록 크리프변형의 크기도 증가하여 선형점성변형의 특성을 보였다. 점토함량이 증가함에 따라 시간 의존적 변형은 증가하는 경향을 보여 점토가 이암의 시간 의존적 변형 발생에 중요한 역할을 하는 것으로 사료된다. 크리프 변형은 시간에 따라 지수함수 형태를 보여 크립 모델 중 하나인 power-law 모델로 잘 예측될 수 있었다.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.735-742
• /
• 2000

Densification behaviors of mixed metal powder under high temperature were investigated. Experimental data of mixed copper and tool steel powder with various volume fractions of Cu powder were obtained under hot isostatic pressing and hot pressing. By mixing the creep potentials of McMeeking and co-workers and of Abouaf and co-workers originally for pure powder, the mixed creep potentials with various volume fractions of Cu powder were employed in the constitutive models. The constitutive equations were implemented into a finite element program (ABAQUS) to compare with experimental data for densification of mixed powder under hot isostatic pressing and hot pressing. Finite element calculations by using the creep potentials of Abouaf and co-workers agreed reasonably well with experimental data, however, those by McMeeking and co-workers underestimate experimental data as observed in the case of pure metal powders.