• 융합보안논문지
• /
• 제18권5_1호
• /
• pp.93-98
• /
• 2018

한국수력원자력, 한국전력공사, 한국남동발전 등의 발전 제어시스템은 전력을 공급하는 국가의 주요 인프라 시설로 악의적인 해킹 공격이 진행될 경우 그 피해는 상상을 초월한다. 실제로 한국수력원자력은 해킹 공격을 당하여 내부정보가 유출되는 등 사회적인 큰 문제를 야기하였다. 본 연구에서는 최근 이슈가 되고 있는 융합보안 연구에 대해 전력회사 중심의 발전 제어시스템을 대상으로 그 환경을 분석하고, 현황을 분석하여 다양한 발전 제어시스템의 안정화를 위한 전략체계 수립과 대응책을 제시하고자 한다. 다양한 물리적 보안시스템(시설), IT 보안시스템, 출입통제시스템 등에서 나오는 데이터 형태를 정규화하고 통합하여 융합인증을 통해 전체 시스템을 통제하고, 융합관제를 통해 위험을 탐지하는 방법을 제안한다.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.52-58
• /
• 2012

In this study, we have investigated the effect of the solar power generation facilities on the power quality of interconnected solar power generation system. When the solar power generation facility was connected to the distribution system, whether the solar power generation is under operation or not, Peak factor of current was increased to 0.033[%], Frequency is deviated from $60{\pm}0.2$[Hz] and also Short term flicker indication($P_{st}$) increased to 0.213[p.u.] compare with the disconnected situation. Harmonic current [%] in orders was 11.42[%] maximum under 11th orders and was 7.861[%] between 11th and 17th orders. These values were about 3 or 4 times compared with "the power system interconnection technique standards" at the same situation above. Therefore, we could confirmed that the solar power generation facility, when it was connected to the existing distribution system, made bad influence on the power qualities such as the peak factor of current, frequency regulation, short term flicker indication($P_{st}$) and harmonic current [%] in orders etc.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2009년도 정기 학술발표대회
• /
• pp.156.1-156.1
• /
• 2009

• Current Photovoltaic Research
• /
• 제11권4호
• /
• pp.118-123
• /
• 2023

The main cause of solar facility fires is arc, and in the last 3 years ('16 to '18), about 80% of domestic solar facility fires have been caused by arcs. The capacity of solar power facilities installed around the world continues to increase, and fires caused by arcs are also expected to increase as the solar power generation facilities that were initially installed become obsolete, In this paper, an arc generation test was conducted based on the UL1699B test standard. As a result of the test, the arc generation satisfied the minimum arc current according to the test conditions, and DC arc characteristics were analyzed through data such as arc voltage and arc current according to variables such as speed of moving electrodes and electrode spacing.

• KEPCO Journal on Electric Power and Energy
• /
• 제3권1호
• /
• pp.9-16
• /
• 2017

The performance test is conducted for the purpose of determining the accurate thermal performance of the power generation facility or deriving the factors of thermal efficiency degradation. Compared to the acquisition method of power plant thermal performance test data by compensating cable or transmission cable, performance test using wireless instrument can acquire digital data in order to shorten the period due to installation and demolition of instrument and enhance safety of workers and relatively accurate data can be acquired thereby improving work efficiency. Wireless instruments have already been introduced to the market a long time ago, and some of them are used in industry such as petrochemical industry. However, there is no example which has been conducted for performance test of power generation facilities. In order to apply power generation facilities, a reliable system capable of acquiring performance data smoothly without affecting the control system is required. The wireless measurement system can eliminate the measurement defects and errors such as the damage due to the movement of the connecting cable, the extension due to the extension of the shield wire, the contact failure at the contact point between the measuring sensor and the connecting wire, This method has the advantage of collecting relatively accurate performance test data.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.867-876
• /
• 2009

Although renewable power is regarded a way to active response to climate change, the stability of whole power system could be a serious problem in the future due to its uncertainties such as indispatchableness and intermittency. From this perspective, the peak time impact of stochastic wind power generation is estimated using simulation method up to year 2030 based on the 3rd master plan for the promotion of new and renewable energy on peak time. Result shows that the highest probability of wind power impact on peak time power supply could be up to 4.41% in 2030. The impact of wind power generation on overall power mix is also analyzed up to 2030 using SCM model. The impact seems smaller than expectation, however, the estimated investment cost to make up such lack of power generation in terms of LNG power generation facilities is shown to be a significant burden to existing power companies.

• 한국인터넷방송통신학회논문지
• /
• 제23권2호
• /
• pp.157-162
• /
• 2023

태양광발전 설비의 고장 중 서지에 의한 고장이 전체 고장률의 20% 차지하고 있으며 발전 중 수십에서 수백[A]의 에너지 방출과 인버터, 접속반 등의 전기적 손상은 전기안전사고로 이어지고 있다. 특히 낙뢰의 경우 전기회로에 이상 전압이 유기되어 절연을 파괴할 뿐만 아니라 이때 흐르는 전류는 화재의 원인이 되고 부품의 열화를 촉진하는 요인으로 작용한다. 이러한 작용으로 도심 밖에서 주택, 아파트, 관공서 등의 도심 내부로 확산하고 있는 태양광 발전장치의 전기 안전 문제가 대두되고 있다. 낙뢰는 필드 기반 및 전도성 전기 간섭을 유발하기에 이 효과는 케이블 길이 또는 도체 루프 증가와 관련하여 증가한다. 또한 서지는 태양광 모듈, 인버터 및 모니터링장치뿐만 아니라 건물 설비의 장치도 손상하기에 최종적으로는 태양광발전시스템의 화재로 인한 운영 중단과 이에 따른 재정손실을 유발하게 시킬 수 있다. 따라서 본 논문에서는 태양광발전시스템의 낙뢰발생으로 인한 화재 및 전기안전사고 증가로 인하여 재산피해 및 인명피해를 줄일 수 있는 목적으로 태양광발전장치의 낙뢰보호 시스템을 연구하고자 한다.

• Current Photovoltaic Research
• /
• 제7권2호
• /
• pp.38-45
• /
• 2019

In this paper, we analyzed the present status of the safety manager and safety assurance aspects through a complex analysis on the operational aspects, marketability and electrical safety aspects of photovoltaic power generation facilities. In the analysis of the equipment status, we analyzed the status and operated status of the installed PV system in Korea and the correlation between the safety manager and the accident. In addition, we analyzed the direction of the ESS through the analysis of the installation status of the ESS, and applied it to the interpretation part of the ESS associated with the solar power generation. The status of the electric safety manager can be used to analyze the data for selecting the electric safety manager by capacity by analyzing the accident status, the electric safety manager operation status, the safety management time by capacity, and the electric safety manager market.

• 전기학회논문지
• /
• 제63권4호
• /
• pp.455-460
• /
• 2014

South Korea's power consumption is increasing every year. For stable electric power supply, more generation facilities are needed. But it is not easy to build nuclear power generation facilities, so provision of renewable energy is thought of as the solution. For the system's stable management, practical use of energy storing system is needed. Currently, pumping up electric power station is considered most useful. In this study, we have calculated the least amount of energy storing device by considering the renewable energy, HVDC, and change in power for the appliance of ESS in Jeju system, according to The 6th Basic Plan for Long-term Electricity Supply and Demand. Also we have calculated the amount of the battery and about the load equalizing effect to use battery as power storing device. Finally, we have calculated the reduction of electricity generation and the reduction of $CO_2$ emission with this study.

• 신재생에너지
• /
• 제17권3호
• /
• pp.16-23
• /
• 2021

Recently, the Korean government announced a plan to activate renewable energies, with focus on clean energy sources such as solar and wind power as the core and the goal of achieving carbon neutrality by 2050. Unlike other photovoltaic (PV) systems, offshore PV installations are advantageous for large-scale expansion because of the ease of securing sites; they also enable lowering the power generation costs based on construction of large-scale power facilities of megawatt class or higher owing to low noise and landscape damage. However, any power generation should proceed with consideration of the special environmental conditions of the ocean. Above all, when installing large-scale facilities, it is important to reduce fluctuations of the structure and secure stability to actively respond to waves. This study is concerned with the development of a floating body technology that actively responds to waves so as to enable commercialization of offshore solar power. A unit platform for research and development on offshore PV generation was installed in the Saemangeum sea, and the structural fluctuations and stability were analyzed to ensure conformity with the major performance indicators.