• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.75-81
• /
• 2016

This study applied laser surface melting process using CW(Continuous wave) Yb:YAG laser and cold-work die steel SM45C and investigated microstructure and hardness. Laser beam speed, power and beam interval are fixed at 70 mm/sec, 2.8 kW and $800{\mu}m$ respectively. Depth of Hardening layer(Melting zone) was a minimum of 0.8 mm and a maximum of 1.0 mm that exceeds the limit of minimum depth 0.5 mm applying trimming die. In all weld zone, macrostructure was dendrite structure. At the dendrite boundary, Mn, Al, S and O was segregated and MnS and Al oxide existed. However, this inclusion didn't observe in the heat-affected zone (HAZ). As a result of interpreting phase transformation of binary diagram, MnS crystallizes from liquid. Also, it estimated that Al oxide forms by reacting with oxygen in the atmosphere. The hardness of the melting zone was from 650 Hv to 660 Hv regardless of the location that higher 60 Hv than the hardness of the HAZ that had maximum 600 Hv. In comparison with the size of microstructure using electron backscatter diffraction(EBSD), the size of microstructure in the melting zone was smaller than HAZ. Because it estimated that cooling rate of laser surface melting process is faster than water quenching.

• 한국안광학회지
• /
• 제16권2호
• /
• pp.167-170
• /
• 2011

목적: 등가구면 시력을 통한 피검자의 난시량 예측이 가능한지를 알아보고자 하였다. 방법: 평균연령 23.3세의 남녀 54명(108안)을 대상으로 굴절이상 완전교정 후 크로스실린더의 도수를 ${\pm}$0.25D씩 증가시키면서 크로스실린더의 (-)축이 $180^{\circ}$ 일 때, $90^{\circ}$ 일 때, 그리고 $45^{\circ}$ 일 때의 원거리(5m) 시력변화를 각각 측정하였다. 결과: 크로스실린더의 도수가 증가될수록 시력은 반비례하여 감소되었다. 크로스실린더 ${\pm}$2.50D ($180^{\circ}$와 $90^{\circ}$)과 ${\pm}$2.25D ($45^{\circ}$)에서 측정 최소값인 시력 0.05로 나타났다. 결론: 각각의 등가구면 시력에 대응하는 난시량에 대한 관계를 추정할 수 있었다.

• 대한전자공학회논문지
• /
• 제26권7호
• /
• pp.112-124
• /
• 1989

최근 본 연구팀에서 기존의 선 조사방식 디지탈 X-선 촬영시스템의 단점을 보완하여 촬영시간을 0.7초로 단축시키고 환자에의 X-선 조사량을 3mR 정도로 감소시킨 디지탈 X-선 촬영시스템을 개발한 바, 이 논문에서는 이 시스템의 감도 특성, 산란 성분 구성률, 양자검출 효율, 변조전달함수, 그리고 콘트라스트 상세도 등과 같은 물리적 및 영상특성들을 조사함으로써 그 촬영성능을 평가하였다. 조사 결과 이 시스템의 감도특성은 입사에너지에 비례하며, 기존의 필름-스크린 보다 적은 X-선 조사량으로도 더 우수한 콘트라스트 해상도를 지녔음이 나타났다. 그 이유는 뛰어난 산란선 제거능력과 양자검출 효율 때문인 것으로 생각된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.159-162
• /
• 2008

발사체의 상단에 사용되는 여러 가지 싸이클의 특성을 조사한 뒤, 그 중 가스발생기 후연소 싸이클 엔진의 특성을 살펴보았다. 발사체 상단에 사용되는 엔진은 추진제와 싸이클의 특성상 연소압-확장비 다이어그램에서 크게 3그룹으로 나뉘어 진다. 영역 II에 위치한 케로신 엔진은 모두 가스발생기 후연소 싸이클 엔진으로서 높은 압력과 복잡한 구조를 하고 있다. 이 싸이클은 그 특성상 2개 이상의 펌프를 사용한다. 즉, 연료라인을 둘로 분기하여 보다 높은 압력이 요구되는 가스발생기 라인에는 2차 펌프를 두어 좀 더 가압을 하여 보다 효율적인 파워사용이 가능하다. 기본적으로 모든 산화제는 가스발생기를 지나 연소기로 향하기 때문에 2차 펌프의 필요성이 줄어들지만 여러가지 이유로 주펌프 이전에 부스터 펌프를 두어 주산화제 펌프의 부담을 덜어주는 경우가 많다. 폐쇄형 엔진은 그 특성상 엔진 비추력 효율이 개방형 엔진보다 상대적으로 높기 때문에 상단엔진에 적합하다.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.117-121
• /
• 2016

Background: Definition and grouping of initiating events (IEs) are important basics for probabilistic safety assessment (PSA). An IE in a spent fuel reprocessing plant (SFRP) is an event that probably leads to the release of dangerous material to jeopardize workers, public and environment. The main difference between SFRPs and nuclear power plants (NPPs) is that hazard materials spread diffusely in a SFRP and radioactive material is just one kind of hazard material. Materials and Methods: Since the research on IEs for NPPs is in-depth around the world, there are several general methods to identify IEs: reference of lists in existence, review of experience feedback, qualitative analysis method, and deductive analysis method. While failure mode and effect analysis (FMEA) is an important qualitative analysis method, master logic diagram (MLD) method is the deductive analysis method. IE identification in SFRPs should be consulted with the experience of NPPs, however the differences between SFRPs and NPPs should be considered seriously. Results and Discussion: The plutonium uranium reduction extraction (Purex) process is adopted by the technics in a model reprocessing plant. The first extraction cycle (FEC) is the pivotal process in the Purex process. Whether the FEC can function safely and steadily would directly influence the production process of the whole plant-production quality. Important facilities of the FEC are installed in the equipment cells (ECs). In this work, IEs in the FEC process were identified and categorized by FMEA and MLD two methods, based on the fact that ECs are containments in the plant. Conclusion: The results show that only two ECs in the FEC do not need to be concerned particularly with safety problems, and criticality, fire and red oil explosion are IEs which should be emphatically analyzed. The results are accordant with the references.

• 한국전자파학회논문지
• /
• 제26권5호
• /
• pp.492-498
• /
• 2015

회로 구성 요소의 집적도가 꾸준히 증가하는 경박단소화 추세에 따라, 회로와 각종 전자 시스템들의 전자파 내성(EMS: Electromagnetic Susceptibility) 문제가 대두되고 있다. 그 중에서도 VCO(Voltage Controlled Oscillator)는 RF 시스템에서 중요한 역할을 하는 만큼, 해당 회로의 전자파 내성에 대한 연구를 필요로 하는 실정이다. 따라서 본 논문에서는 전기적 발진기에서 발생하는 위상 잡음을 선형시불변(LTV: Linear Time Variant) 시스템으로 해석하는 위상 잡음 이론을 적용하여, 1.2 GHz 의 기준 발진 주파수를 갖는 링 VCO와 LC VCO에 대해 전원 전압에 가해진 잡음에 따른 전자파 내성을 분석하였다. 시간 영역 시뮬레이션 결과로, 위상잡음 특성을 나타내는 지표가 되는 임펄스 강도를 추출하는 알고리즘을 구현하였다. 전원 잡음이 존재하지 않는 경우에는 두 VCO에서 발생하는 지터의 크기가 2.1 ps로써 비슷하였으나, 다양한 전원 잡음이 인가됨에 큰 차이를 보이며, LC VCO의 EMS 특성이 링 VCO에 비해 우수한 것을 임펄스 감도 함수와 eye-diagram을 통해 확인하였다.

• 한국군사과학기술학회지
• /
• 제1권1호
• /
• pp.227-237
• /
• 1998

HgCdTe Is the most versatile material for the developing infrared devices. Not like III-V compound semiconductors or silicon-based photo-detecting materials, HgCdTe has unique characteristics such as adjustable bandgap, very high electron mobility, and large difference between electron and hole mobilities. Many research groups have been interested in this material since early 70's, but mainly due to its thermodynamic difficulties for preparing materials, no single growth technique is appreciated as a standard growth technique in this research field. Solid state recrystallization(SSR), travelling heater method(THM), and Bridgman growth are major techniques used to grow bulk HgCdTe material. Materials with high quality and purity can be grown using these bulk growth techniques, however, due to the large separation between solidus and liquidus line on the phase diagram, it is very difficult to grow large materials with minimun defects. Various epitaxial growth techniques were adopted to get large area HgCdTe and among them liquid phase epitaxy(LPE), metal organic chemical vapor deposition(MOCVD), and molecular beam epitaxy(MBE) are most frequently used techniques. There are also various types of photo-detectors utilizing HgCdTe materials, and photovoltaic and photoconductive devices are most interested types of detectors up to these days. For the larger may detectors, photovoltaic devices have some advantages over power-requiring photoconductive devices. In this paper we reported the main results on the HgCdTe growing and characterization including LPE and MOCVD, device fabrication and its characteristics such as single element and linear array($8{\times}1$ PC, $128{\times}1$ PV and 4120{\times}1$ PC). Also we included the results of the dewar manufacturing, assembling, and optical and environmental test of the detectors.

• 전자공학회논문지SC
• /
• 제42권3호
• /
• pp.25-32
• /
• 2005

PLC는 공장자동화 설계에서 가장 많이 사용되고 있으며, PLC 언어에 대한 연구도 활발히 이루어지고 있다. 본 논문에서는 PLC를 사용한 공장 자동화 설계에서 제어하고자 하는 출력 기기의 수가 증가되었을 때 출력을 확장하는 방법을 제안한다. 기본 베이스에 출력 유닛을 더 이상 장착할 수 없는 상태에서 출력 점수를 $2{\sim}3$점 확장하고자 한다면, 증설베이스와 파워서플라이, 증설케이블 및 출력 유닛을 별도로 장착하여야 한다. 그러면 비용이 상당히 추가되어야 한다. 본 논문에서는 출력을 소량으로 확장하는 방법을 제안한다. 즉, 출력 유닛의 접점을 입력받아 디코딩하는 확장모듈과 인코딩 및 디코딩하여 최종 출력접점으로 확장하는 프로그램 모듈을 설계하고, 실험을 통해 그의 타당성을 확인하였다.

• 복식문화연구
• /
• 제23권6호
• /
• pp.1038-1050
• /
• 2015

This study is a theoretical research to investigate a methodological framework for analyzing the representation of women in fashion photography. For this study, this article attempts to develop a conceptual framework of the visual representation system through Lacan's gaze theory, and analyze the representational aspects of women configured by gendered characteristics in the visual representation system. Structuralizing the visual representation system based on that theory, the gaze, the image/screen, and the subject of representation in the Lacan's triangle diagram are replaced by the camera as the signifier of gaze, the representational image, and the seeing subject respectively. In the visual representation system, the camera creates a male-oriented visual field and structures a relationship of gendered power between male gaze as the seeing subject and female eye as an object to be seen. Looking into the representational aspects of women in this visual representation system structuralized by male gaze, women are represented in a way that reflects male desire through masquerade to comply with the patriarchal gaze, or differences that emphasizes the uniqueness and autonomy of women released from a patriarchal discourse. This study would be significant in that it provides theoretical basis for an analytic approach to the representation of women in fashion photography which we accept as a fixed one through the ideology of naturalization.

• Industrial Engineering and Management Systems
• /
• 제10권3호
• /
• pp.185-190
• /
• 2011

A driver interacts directly with the car seat at all times. There are ergonomic characteristics that have to be followed to produce comfortable seats. However, most of previous researches focused on either static or dynamic condition only. In addition, research on car seat development is critically lacking although Malaysia herself manufactures its own car. Hence, this paper integrates objective measurements and subjective evaluation to predict seat discomfort. The objective measurements consider both static and dynamic conditions. Steven's psychophysics power law has been used in which after expansion; ${\psi}\;=\;a+b{\varphi}_s^{\alpha}+c{\varphi}_v^{\beta}$ where ${\psi}$ is discomfort sensation, ${\varphi}_s^{\alpha}$ is static modality with exponent ${\alpha}$ and ${\varphi}_v^{\beta}$ is dynamic modality with exponent ${\beta}$. The subjects in this study were local and the cars used were Malaysian made compact car. Static objective measurement was the seat pressure distribution measurement. The experiment was carried out on the driver's seat in a real car with the engine turned off. Meanwhile, the dynamic objective measurement was carried out in a moving car on real roads. During pressure distribution and vibration transmissibility experiments, subjects were requested to evaluate their discomfort levels using vehicle seat discomfort survey questionnaire together with body map diagram. From subjective evaluations, seat pressure and vibration dose values exponent for static modality ${\alpha}$ = 1.51 and exponent for dynamic modality ${\beta}$ = 1.24 were produced. The curves produced from the $E_{q.s}$ showed better $R_{-sq}$ values (99%) when both static and dynamic modalities were considered together as compared to Eq. with single modality only (static or dynamic only R-Sq = 95%). In conclusion, car seat discomfort prediction gives better result when seat development considered both static and dynamic modalities; and using ergonomic approach.