• 제목/요약/키워드: Power Cutoff Algorithm

검색결과 6건 처리시간 0.02초

대기전력 차단시점 발견을 위한 모델링과 그룹생성 알고리즘 구현 (Modeling for Discovery the Cutoff Point in Standby Power and Implementation of Group Formation Algorithm)

  • 박태진;김수도;박만곤
    • 한국멀티미디어학회논문지
    • /
    • 제12권1호
    • /
    • pp.107-121
    • /
    • 2009
  • 대기전력(Standby power) 소모가 발생하는 첫 번째 요인은 전원에서 IC로 들어오면서 거쳐야하는 기동전압 때문이며 나머지 하나는 IC가 동작할 때의 전류 때문이다. 본 논문에서는 대기전력 상태와 차단 시점의 패턴분석을 통해서 자동 On/Off할 수 있도록 하는 간단한 모듈장치 구성과 알고리즘 적용에 목적을 두었다. 이를 위해서 전력 신호분석과 모델링에 근간을 두었으며 대기전력 절감을 위해서 On/Off 차단기준을 마련했다. On/Off 차단 시점을 찾기 위해서 $1^{st}$ SCS와 $2^{nd}$ SCS의 차분값(subtraction value), 그리고 콘센트로부터 유입된 초당 샘플링 계수에 대한 중간값(median value)을 중요한 파라미터로써 정의한 다음 대기전력 상태에서의 유사그룹 및 유력패턴 그룹 생성 알고리즘을 수행했다.

  • PDF

Zigbee-MQTT 기반 스마트 홈 환경에 적합한 대기전력 차단 시스템 설계 및 구현 (Design and Implementation of Standby Power Cutoff System for Smart Home Environment Based on Zigbee-MQTT)

  • 장영환;양승수;박석천
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권4호
    • /
    • pp.129-135
    • /
    • 2017
  • 최근 IoT 기술 발전에 따라 스마트 홈과 같은 부가서비스들이 증가하면서 내부에서 사용하는 기기들의 전력 소비량에 대한 관심이 증가하고 있다. 특히 기기들의 주 기능이 수행되지 않는 동안 발생하는 대기전력 사용량이 전력에너지의 약 11%로 나타나면서 대기전력 차단에 대한 문제점이 제시되고 있다. 그러나 실질적으로 대기전력을 차단하기 위해서는 플러그를 뽑아야한다는 문제점이 있다. 따라서 본 논문에서는 이러한 문제점을 개선하기 위해 사용자의 참여도를 최소화하여 자동적으로 제어 및 관리할 수 있는 대기전력 차단 알고리즘을 설계 및 구현하였다. 구현한 시스템을 평가한 결과 기존 시스템보다 평균 약 5.89Wh의 대기전력 차단율이 향상된 것을 확인하였다.

An Improved Flux Estimator for Gap Flux Orientation Control of DC-Excited Synchronous Machines

  • Xu, Yajun;Jiang, Jianguo
    • Journal of Power Electronics
    • /
    • 제15권2호
    • /
    • pp.419-430
    • /
    • 2015
  • Flux estimation is a significant foundation of high-performance control for DC-excited synchronous motor. For almost all flux estimators, such as the flux estimator based on phase locked loop (PLL), DC drift causes fluctuations in flux magnitude. Furthermore, significant dynamic error may be introduced at transient conditions. To overcome these problems, this paper proposes an improved flux estimator for the PLL-based algorithm. Filters based on the generalized integrator are used to avoid flux fluctuation problems caused by the DC drift at the back electromotive force. Programmable low-pass filters are employed to improve the dynamic performance of the flux estimator, and the cutoff frequency of the filter is determined by the dynamic factor. The algorithm is verified by a 960V/1.6MW industrial prototype. Simulation and experimental results show that the proposed estimator can estimate the flux more accurately than the PLL-based algorithm in a cycloconverter-fed DC-excited synchronous machine vector control system.

직렬아크 검출 알고리즘에 관한 연구 (A Study on the Series Arc Detection Algorithm)

  • 김일권;박대원;최수연;박찬용;길경석
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.1433-1437
    • /
    • 2007
  • This paper describes the detection algorithm which can distinguish series arcing signal from voltage harmonics or noises produced by the operation of non-linear loads. A high pass filter with the cutoff frequency of 3 kHz is designed and it can attenuate power frequency signal to 80 dB. Series arcing phenomena is simulated to an incandescent lamp controlled by a dimmer. From the experimental results, it is confirmed that the amplitude of the filter output voltage varies at random during series arcing but the signal generated by non-linear loads appears on a regular basis. We proposed a series arcing detection algorithm using the chaotic nature of voltage signal.

  • PDF

무선통신 시스템에서 AGC 알고리즘 연구 (On the AGC Design of Wireless Communication Systems)

  • 예충일;김환우
    • 한국전자파학회논문지
    • /
    • 제15권6호
    • /
    • pp.567-572
    • /
    • 2004
  • 본 논문은 무선통신 시스템에서 사용되는 자동이득조절(AGC) 알고리즘에 관한 것이다. AGC 설계는 적합한 analog-to-digital converter(ADC)의 선정과 analog-to-digital 변환 과정에서 발생되는 양자화 잡음을 최소로 하기 위해 ADC로 입력되는 신호 전력을 일정하게 유지시키는 것을 포함한다. 본 논문은 요구되는 ADC의 정밀도를 결정하는 과정을 설명하고 AGC 설계 parameter들을 결정하는 방법을 제시한다. 또한 모의실험을 통해 제시한 알고리즘의 타당성을 검증한다.

무선 간섭 제거 중계기에서 적응형 위상 잡음 보상기 연구 (Adaptive Phase Noise Compensator in Wireless ICS Repeater)

  • 정해성;백광훈;유흥균
    • 한국전자파학회논문지
    • /
    • 제22권4호
    • /
    • pp.481-488
    • /
    • 2011
  • 본 논문에서는 위상 잡음 분석과 성능 평가를 통한 OFDM 기반의 새로운 무선 간섭 제거 중계기를 제안한다. 최근 무선 중계기에 관련된 많은 연구가 진행되고 있다. 이전의 연구는 단지 궤환 신호를 제거하는 알고리즘에 관한 것이었다. 하지만, 무선 중계기 시스템에서는 up/down 컨버터에 위상 잡음의 영향이 존재한다. 무선 중계기 시스템에서 위상 잡음의 영향이 있게 되면 시스템 성능은 매우 열화될 것이다. 따라서, 무선 중계기 시스템에서는 위상 잡음을 효과적으로 제거할 수 있는 위상 잡음 보상기가 필요하다. 따라서, 본 논문에서는 위상 잡음의 영향을 효과적으로 제거할 수 있는 OFDM 기반의 적응형 위상 잡음 보상기를 제안한다. 간섭을 효과적으로 제거하기 위해서, 무선 중계기 시스템에 적응형 위상 잡음 보상기를 적용한다. 본 논문에서 제안하는 적응형 위상 잡음 보상기를 통해서 위상 잡음의 영향을 효과적으로 제거한다. 또한, OFDM 기반 무선 중계기 시스템에서 발생되는 위상 잡음의 영향을 분석한다. 변조 방식이 4QAM이고 위상 잡음의 전력이 -15 dBc, 위상 잡음의 cutoff 주파수가 100 kHz인 경우에, 제안된 알고리즘의 BER 성능은 $10^{-4}$에서 적응형 등화기를 사용하고 위상 잡음 보상기를 사용하지 않은 경우보다 4 dB 정도 더 좋다.