• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권4호
• /
• pp.1471-1488
• /
• 2018

Interference mitigation is a significant issue in the cognitive heterogeneous networks, this paper studied how to reduce the interference to macrocell users (MU) and improve system throughput. Establish the interference model with imperfect spectrum sensing by analyzing the source of interference complexity. Based on the user topology, the optimize problem was built to maximize the downlink throughput under given interference constraint and the total power constraint. We decompose the resource allocation problem into subcarrier allocation and power allocation. In the subcarrier assignment step, the allocated number of subcarriers satisfies the requirement of the femtocell users (FU).Then, we designed the power allocation algorithm based on the Lagrange multiplier method and the improved water filling method. Simulation results and performance analyses show that the proposed algorithm causes less interference to MU than the algorithm without considering imperfect spectrum sensing, and the system achieves better throughput performance.

• 에너지공학
• /
• 제6권2호
• /
• pp.129-136
• /
• 1997

본 연구는 전력계통의 화력발전소로부터 배출되는 NOx및 SO$_2$같은 대기환경오염물질을 고려한 새로운 경제부하배분법을 제시한다. 제안된 방법은 총배출량 제약, 지역별 배출랑 제약 그리고 이들의 동시제약을 만족하면서 화력발전기의 출력을 계획하는 것에 대해 설명되어진다. 또한, 모든 부하배분의 대체안이며 배출량과 총연료비 사이의 상호상충관계를 나타내는 Trade-Off곡선에 의해 배출량과 총연료비 사이의 감도해석이 이 알고리즘에 적용된다. 한편, 이 제안된 방법은 개별적 환경피해(NOx, SO$_2$등)의 상대적 가중치와 총환경비용의 함수로써 경제부하배분이 이것에 의해 어떻게 변화되는지를 해석한다. 본 연구에서 제안된 방법을 시험계통에 적용하여 그 유용성을 검증하였다.

• 대한인간공학회지
• /
• 제33권2호
• /
• pp.77-86
• /
• 2014

Objective: The purpose of this study is to grasp the fundamental structure of incident occurrence in nuclear organizations based on system thinking, and analyze how various causes are interrelated in terms of the causal loop diagram. Background: The recent domestic and overseas nuclear power plant-related incidents and accidents are directly or indirectly associated with safety culture, and thus effective plans for the improvement of safety culture are being called for. While the safety of a nuclear power plant is highly dependent upon technology and equipment, the utilization, maintenance and inspection of the technology and equipment are conducted by workers of the nuclear power plant. Method: Methodology of system thinking perspective using causal loop analysis. Results: As a result of the analysis, first, it turned out that the fundamental cause of incident occurrence in nuclear organizations is time constraint. Second, if a workload of workers increases, their adherence to regulations and procedures comes to be reduced due to time constraint. Third, it is needed, through organizational learning education, to increase actions made from thoughts considering safety as the utmost priority in advance. Fourth, it is necessary to improve professionalism by enhancing educational programs for new workers, and to develop various scenarios with which they can cope with certain situations. Application: This paper provides a base for system dynamics simulation model for future study.

• 한국정보통신학회논문지
• /
• 제20권5호
• /
• pp.917-922
• /
• 2016

RF신호로부터 전력을 수집하는 에너지 하베스팅 기술은 센서의 전원 공급 문제를 해결함으로써 네트워크의 수명을 향상시킬 수 있는 방안으로 최근 큰 관심을 받고 있다. 본 논문에서는 무선 정보 및 전력 동시 전송을 위한 효율적인 알고리즘을 제안하고자 한다. 먼저, 에너지 하베스팅 네트워크에서 채널의 probability density function을 이용하여 water-level의 하계값을 찾은 후, 이를 기반으로 파워 할당 해를 도출한다. 또한, 최소 필요 획득 에너지 조건을 효율적으로 만족시켜줄 수 있는 파워 분할 방안을 제안하였다. 시뮬레이션을 통해 제안 방안은 기존 방안에 비해 최소 필요 획득 에너지 조건을 보장하면서 평균 데이터 전송률을 향상시키고, 최적해에 비해서는 10% 미만의 미미한 성능 저하가 있었지만 계산 복잡도를 현저히 줄일 수 있음을 보인다.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.337-345
• /
• 2009

Deregulation in power industry has made the reactive power ancillary service management a critical task to power system operators from both technical and economic perspectives. Reactive power management in power systems is a complex combinatorial optimization problem involving nonlinear functions with multiple local minima and nonlinear constraints. This paper proposes a practical market-based reactive power ancillary service management scheme to tackle the challenge. In this paper a new model for voltage security and reactive power management is presented. The proposed model minimizes reactive support cost as an economic aspect and insures the voltage security as a technical constraint. For modeling validation study, two optimization algorithm, a genetic algorithm (GA) and particle swarm optimization (PSO) method are used to solve the problem of optimum allocation of reactive power in power systems under open market environment and the results are compared. As a case study, the IEEE-30 bus power system is used. Results show that the algorithm is well competent for optimal allocation of reactive power under practical constraints and price based conditions.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1315-1325
• /
• 2019

Aiming at the negative sequence and harmonic problems in the operation of railway static power conditioners, an optimization compensation strategy for negative sequence and harmonics is studied in this paper. First, the hybrid RPC topology and compensation principle are analyzed to obtain different compensation zone states and current capacities. Second, in order to optimize the RPC capacity configuration, the minimum RPC compensation capacity is calculated according to constraint conditions, and the optimal compensation coefficient and compensation angle are obtained. In addition, the voltage unbalance ${\varepsilon}_U$ and power factor requirements are satisfied. A PSO (Particle Swarm Optimization) algorithm is used to calculate the three indexes for minimum compensating energy. The proposed method can precisely calculate the optimal compensation capacity in real time. Finally, MATLAB simulations and an experimental platform verify the effectiveness and economics of the proposed algorithm.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권9호
• /
• pp.494-499
• /
• 2004

This paper presents to compute the power economic dispatch, an optimal power flow (OPF) computation algorithm, considering the load power factor limits constraint in developed. Efficient reactive power planning enhances economic operation as well as system security. Accordingly, an adequate level of power factor limits for the load busesshould be evaluated for economic operation. In this paper, the ranges of acceptable load power factors are portrayed as bandwidths of load power factor expressed as a function of load level. The load power factor limits are included and described into the OPF's objective function. The method Proposed is applied to IEEE 26 bus system.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.41-45
• /
• 2013

Modern electronic devices such as tablets and smartphones are getting more powerful and efficient. The demand in feature sets, functionality and usability increase exponentially and this has posed a great challenge to the design of a power distribution network (PDN). Power rails merging is a popular option used today in a PDN design as numerous power rails are no longer feasible due to form factor limitation and cost constraint. In this paper, the criteria and limitations for power rails merging are discussed. Despite having all the advantages such as pin count reduction, decoupling capacitors sharing, lower impedance and cost saving, power rails merging can however, introduce coupling noise to the system. In view of this, a PDN design with power rails merging that fulfills design recommendations and specifications such as noise target, power well placement, voltage supply values as well as power supply quadrant assignment is extremely important.

• ETRI Journal
• /
• 제36권4호
• /
• pp.643-653
• /
• 2014

To reduce interconnect delay and power consumption while improving chip performance, a three-dimensional integrated circuit (3D IC) has been developed with die-stacking and through-silicon via (TSV) techniques. The power supply problem is one of the essential challenges in 3D IC design because IR-drop caused by insufficient supply voltage in a 3D chip reduces the chip performance. In particular, power bumps and TSVs are placed to minimize IR-drop in a 3D power delivery network. In this paper, we propose a design methodology for 3D power delivery networks to minimize the number of power bumps and TSVs with optimum mesh structure and distribute voltage variation more uniformly by shifting the locations of power bumps and TSVs while satisfying IR-drop constraint. Simulation results show that our method can reduce the voltage variation by 29.7% on average while reducing the number of power bumps and TSVs by 76.2% and 15.4%, respectively.

• 플랜트 저널
• /
• 제5권1호
• /
• pp.40-44
• /
• 2009

This study presents an operational technique to maximize the profit of a cogeneration power plant under cost-based pool power market. In benefit side energy sale profit, heat sale profit, and supplementary fund profit for electric power industry are included and the changeable cost was considered in cost side. The profit of a cogeneration power plant is varied enormously by the operation conditions, and constraint conditions. The result of this case study can be used as a reference to a cogeneration power plant under the same power trading system.