• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.729-736
• /
• 2005

In this paper, we introduce a new approach for the design of uplink sub-channel allocation and power control in the High-speed Portable Internet system that is based on OmMAnDD scheme. In OFDMA system, because the number of allocated sub-channel in mobile station varies from one to the whole sub-channel as in base station while mobile station's transmit power is lower than that of base station, full loading range(FLR) constraint occurs where whole sub-channel can be used and the conventional open-loop power control scheme can not be used beyond FLR. We propose a new scheme that limits the maximum sub-channel allocation number and uses power concentration gain(PCG) depending on location of mobile station, which is based on ranging in OfDMA system. Simulation results show that the proposed scheme extends the uplink coverage to the entire cell service coverage area, provides solutions for optimum utilization of radio resource and enables open-loop power control beyond FLR without extra hardware complexity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.15-22
• /
• 2006

In OFDMA system, even if the number of allocated sub-channel in mobile station varies from one to the whole sub-channel as in base station, while because of mobile station's transmit power is lower than that of base station, therefore full loading range(FLR) constraint occurs where whole sub-channel can be used and the conventional open-loop power control scheme can not be used beyond FLR. We propose a new scheme that limits the maximum sub-channel allocation number and uses power concentration gain(PCG) depending on location of mobile station, which is based on ranging in OFDMA system. Simulation results show that the proposed scheme provides solutions for optimum utilization of radio resource depending on the location of mobile station and enables open-loop power control beyond FLR without extra hardware complexity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.333-336
• /
• 2001

The transient response in PDFA(Praseodymium-Doped Fiber Amplifier) is theoretically investigated. The PDFA has the spectral gain band in 1.3${\mu}{\textrm}{m}$. The transient model includes the transient buildup of the population inversion, the pump power, and the signal power and their transient variation along the fiber amplifier. The numerical analysis of transient model can predict the gain saturation, the variation of pump power and the gain as a function of the fiber length. It also shows the gain saturation and recovery effects depending on the pumping rate lead to distortion and saturation in the amplification of optical pulse. The results of numerical analysis, for the case of the Pr ion concentration of 1000ppm and the pump power of 0.5W the gain saturation is obtained 30dB at the length of 5m and the saturation time of upper level is 250 $mutextrm{s}$.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.342-350
• /
• 2010

An optimal wideband gain flattened hybrid erbium-doped fiber amplifier/fiber Raman amplifier (EDFA/FRA) has been introduced. A new and effective optimization method called particle swarm optimization (PSO) is employed to find the optimized parameters of the EDFA/FRA. Numerous parameters which are the parameters of the erbium-doped fiber amplifier (EDFA) and the fiber Raman amplifier (FRA) define the gain spectrum of a hybrid EDFA/FRA. Here, we optimize the length, $Er^{3+}$ concentration, and pump power and wavelength of the EDFA and also pump powers and wavelengths of the FRA to obtain the flattest operating gain spectrum. Hybrid EDFA/FRA with 6-pumped- and 10-pumped-FRAs have been studied. Gain spectrum variations are 1.392 and 1.043 dB for the 6-pumped- and 10-pumped-FRAs, respectively, in the 108.5 km hybrid EDFA/FRAs, with 1 mW of input signal powers. Dense wavelength division multiplexing (DWDM) system with 60 signal channels in the wavelength range of 1529.2-1627.1 nm, i.e. the wide bandwidth of 98 nm, is studied. In this work, we have added FRA's pump wavelengths to the optimization parameters to obtain better results in comparison with the results presented in our previous works.

• Design & Manufacturing
• /
• v.16 no.1
• /
• pp.15-20
• /
• 2022

This paper is about elimination the situation in which gas sensor data becomes inaccurate due to temperature control when a semiconductor gas sensor is driven. Recently, interest in semiconductor gas sensors is high because semiconductor sensors can be driven with small and low power. Although semiconductor-type gas sensors have various advantages, there is a problem that they must operate at high temperatures. First temperature control was configured to adjust the temperature value of the heater mounted on the gas sensor. At that time, in controlling the heater temperature, gas sensor data are fluctuated despite supplying same gas concentration according to the temperature controlled. To resolve this problem, gas and temperature are extracted as a data. And then, a relation function is constructed between gas and temperature data. At this time, it is included low pass filter to get the stable data. In this paper, we can find optimal gain and parameters between gas and temperature data by using genetic algorithm.

• Current Optics and Photonics
• /
• v.3 no.2
• /
• pp.105-110
• /
• 2019

The visible-light communication (VLC) system is a promising candidate to fulfill the present and future demands for a high-speed, cost-effective, and larger-bandwidth communication system. VLC modulates the visible-light signals from solid-state LEDs to transmit data between transmitter and receiver, but the broadcasting and the line-of-sight propagation nature of visible-light signals make VLC a communication system with a limited operating range. We present a novel architecture to increase the operating range of VLC. In our proposed architecture, we guide the visible-light signals through the fiber and amplify the dissipated signals using visible-light fiber amplifiers (VLFAs), which are the most important and the novel devices needed for the proposed architecture of the VLC. Therefore, we design, analyze, and apply a VLFA to VLC, to overcome the inherent drawbacks of VLC. Numerical results show that under given constant conditions, the VLFA can amplify the signal up to 35.0 dB. We have analyzed the effects of fiber length, active ion concentration, pump power, and input signal power on the gain and the noise figure (NF).

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.152-159
• /
• 2004

In this study, we design the one-chip PWM IC with high voltage power switch (300V class LDMOSFET) for SMPS (Switching Mode Power Supply) application. Reference circuits generate constant voltage(5V) in the various of power supply and temperature condition. Error amp. is designed with large DC gain $({\simeq}65dB)$, unity frequency $({\simeq}190kHz)$ and large $PM(75^{\circ})$. comparator is designed with 2 stage. Saw tooth generators operate with 20kHz oscillation frequency. Also, we optimize drift concentration & drift length of n-LDMOSFET for design of high voltage switching device. It is shown that simulation results have the breakdown voltage of 350V. (using ISE-TCAD Simulation tool). PWM IC with power switching device is designed with 2um design rule and Bi-DMOS technology.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.257-259
• /
• 1987

The photoelectronic properties of CdTe films sintered with various amounts of $CdCl_2$ and $CuCl_2$ have been investigated by measurements of dark electrical resistivity, photocurrent, thermoelectric power, optical transmission and by observation of microstructure. The grain size and optical transmission of sintered CdTe films increase with increasing amount of $CdCl_2$ indicating that $CdCl_2$ acts as a sintering aid. The photoconductivity gain(A-$cm^2/W$) increases and resistivity($\Omega$-cm) decreases with increasing amount of $CuCl_2$ up to 100ppm due to the occurance of Cu-doping during sintering. The dark resistivity could be reduced farther by post heat treatments. The dark resistivity was still high($10^3{\Omega}$-cm) so that the accurate determination of the hole concentration by Hall measurement or by thermoelectric power measurement was not possible. From the analysis of electrical activation energy, however it can be concluded that the hole concentration is less than $10^{14}/cm^3$ and all grains are depleted of carrier by the trapping centers at grain boundaries.

• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.99-104
• /
• 1990

The effects of concentrations of sulfur dioxide (0.16-0.20%) and steeping times (25-50hr) at $52^{\circ}C$ on the changes in pH of steep water and weight and volume of corn and starch properties were investigated. The pH of steep water increased and remained constant after steeping time of 20 hours. The degree of weight or volume gain decreased as the concentration of sulfur dioxide increased. The protein content of starch increased as the concentration of sulfur dioxide increased. Water·binding capacity of starch showed the highest value at the steeping time of 35 hours. Swell ins power and solubility decreased as cocentration of sulfur dioxide and steeping time increased. The initial pasting temperature and peak viscosity were increased and decreased, respectively, as the concentration of sulfur dioxide increased. At the same concentration of sulfur dioxide, the peak viscosity was increased and then decreased. Viscosity of starch in sodium hydroxide solution tended to decrease as the concentration of sulfur dioxide and sleeping time increased. The gel volume of starch in 3M KSCN solution was not affected by concentration of sulfur dioxide and steeping time.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1514-1524
• /
• 2019

Hydrogen-steam gas mixture may be injected into containment with flow regime varying both spatially and transiently due to wall effect and pressure difference between primary loop and containment in severe accidents induced by loss of coolant accident. Preliminary CFD analysis is conducted to gain information about the helium flow regime transition process from jet to buoyancy plume for forthcoming experimental study. Physical models of impinging jet and wall condensation are validated using separated effect experimental data, firstly. Then helium transportation is analyzed with the effect of jet momentum, buoyancy and wall cooling discussed. Result shows that helium distribution is totally dominated by impinging jet in the beginning, high concentration appears near gas source and wall where jet momentum is strong. With the jet weakening, stable light gas layer without recirculating eddy is established by buoyancy. Transient reversed helium distribution appears due to natural convection resulted from wall cooling, which delays the stratification. It is necessary to concern about hydrogen accumulation in lower space under the containment external cooling strategy. From the perspective of experiment design, measurement point should be set at the height of connecting pipe and near the wall for stratification stability criterion and impinging jet modelling validation.