• Resources Recycling
• /
• v.30 no.1
• /
• pp.44-52
• /
• 2021

This study investigated the effect of the type of alkaline precipitant used on the synthesis of lithium hydroxide by examining the behavior of lithium hydroxide produced using lithium sulfate recovered from a waste lithium secondary battery as a raw material. The double-replacement reaction (DRR) process was used to remove the impurities contained in the lithium salt precursor of lithium sulfate and to improve the efficiency of the synthesis of lithium hydroxide. The experiment was conducted by control the molar ratio of the precursor ([Li]/[OH]), the reaction temperature, and the composition of the alkaline precipitant (KOH, Ca(OH)2, Ba(OH)2) used for the production of highly-crystalline lithium hydroxide. A secondary solid-liquid separation was performed following the reaction to remove the impurities generated, and the purified aqueous solution of lithium hydroxide was evaporated to remove the moisture and obtain the product as a powder. The crystallinity and synthesis behavior of the product were examined.

• Clean Technology
• /
• v.25 no.2
• /
• pp.101-106
• /
• 2019

The aim of this study is to investigate the feasibility of an Ni-SA catalyst, which was prepared from nickel, kieselguhr, and alumina, for the hydrogenation of triglyceride in a bench-scale reactor. Ni-SA powders were prepared by precipitating nickel precursors on a silica and alumina support. The powder was reduced in a hydrogen flow, mixed with a saturated palm oil, and then cooled to prepare an Ni-SA catalyst tablet. The sizes of NiO crystals of a commercial Pricat catalyst and the Ni-SA catalyst prepared in this study were $35{\AA}$ and $38{\AA}$, respectively. The pore volume and pore size of the Ni-SA catalyst was much larger than the pore volume and pore size of the Pricat catalyst. In addition, the average particle size of the Ni-SA catalyst was much smaller than that of the Pricat catalyst. The triglyceride hydrogenation reaction was carried out in a semi-batch reactor using catalysts impregnated with oil and molded into tablets. It was found that the Ni-SA catalyst was superior to the commercial Pricat catalyst in triglyceride hydrogenation, which could be ascribed to the raw material and the products being less influenced by the diffusion resistance in the pores of the Ni-SA catalyst. The Ni-SA catalyst prepared in this study has the potential to replace the Pricat catalyst as a catalyst for use in the commercial process for hydrogenation of triglyceride.

• Journal of Animal Science and Technology
• /
• v.61 no.2
• /
• pp.77-86
• /
• 2019

The supplementation level of barley was limited because of high contents of fiber in monogastric animals. Barley contained high soluble fiber, thus it could prevent to diarrhea of weaning pigs. Moreover, as the barley break down by enzymes, free sugars come out from the barley, which could be used as an energy source in weaning pigs and replace milk by-products in weaning pig's diet. Therefore, present study was conducted to investigate the influence of barley to replace milk by-product in weaning pig's diet on growth performance, blood profile, nutrient digestibility, diarrhea incidence, and economic analysis in weaning pigs. A total of 112 crossbred ($[Yorkshire{\times}Landrace]{\times}Duroc$, weaned at 28 days of age) piglets were allotted to 4 treatments in a randomized complete block (RCB) design. Each treatment has 7 replications with 4 pigs per pen. Pigs were fed each treatment diet which containing different levels of barley (0%, 10%, 20%, and 30%) at the expense of whey powder and lactose. Three phase feeding programs were used for 6 weeks of growth trial (phase 1: 0-2 weeks; phase 2: 3-4 weeks; phase 3: 5-6 weeks). During 0-2 week, body weight (BW), average daily gain (ADG) and G:F ratio were decreased as barley level increased in the diet (linear response, p < 0.01). In blood profile, blood urea nitrogen was decreased as the barley level increased in the diet (linear, p < 0.01). However, no significant differences were observed in blood glucose level. In nutrient digestibility, crude fat digestibility was linearly increased as barley increased (linear, p < 0.01). The incidence of diarrhea was improved as increasing barley contents in all phases (linear, p < 0.01). These results demonstrated that supplementation of barley to replace milk by-product influenced negatively on growth performance during 0-2 week. However, the incidence of diarrhea and later growth performance from 3 week postweaning were improved as dietary barley level increased.

• Korean Journal of Materials Research
• /
• v.29 no.4
• /
• pp.205-210
• /
• 2019

$Pb(Zr,Ti)O_3$ (PZT) is used for the various piezoelectric devices owing to its high piezoelectric properties. However, lead (Pb), which is contained in PZT, causes various environment contaminations. $(K,Na)NbO_3$ (NKN) is the most well-known candidate for a lead-free composition to replace PZT. A single crystal has excellent piezoelectric-properties and its properties can be changed by changing the orientation direction. It is hard to fabricate a NKN single crystal due to the sodium and potassium. Thus, $(Na,K)NbO_3-Ba(Cu,Nb)O_3$ (NKN-BCuN) is chosen to fabricate the single crystal with relative ease. NKN-BCuN pellets consist of two parts, yellow single crystals and gray poly-crystals that contain copper. The area that has a large amount of copper particles may melt at low temperature but not the other areas. The liquid phase may be responsible for the abnormal grain growth in NKN-BCuN ceramics. The dielectric constant and tan ${\delta}$ are measured to be 684 and 0.036 at 1 kHz in NKN-BCuN, respectively. The coercive field and remnant polarization are 14 kV/cm and $20{\mu}C/cm^2$.

• Clean Technology
• /
• v.27 no.2
• /
• pp.139-145
• /
• 2021

The purpose of this study is to recover valuable metals from spent batteries using a dry process. We focused on the effect of the smelting temperature on the composition of recovered solid and liquid products and collected gaseous products. After removal of the cover, the spent battery was left in NaCl solution and discharged. Then, the spent battery was made into a powder form through a crushing process. The smelting of the spent battery was performed in a tubular electric furnace in an oxygen atmosphere. For spent lithium-ion batteries, the recovery yield of the solid product was 80.1 wt% at a reaction temperature of 850 ℃, and the final product had 27.2 wt% of cobalt as well as other metals such as lithium, copper, and aluminum. Spent nickel-hydrogen batteries had a recovery yield of 99.2 wt% at a reaction temperature of 850 ℃ with about 37.6 wt% of nickel and other metals including iron. For spent nickel-cadmium batteries, the yield decreased to 65.4 wt% because of evaporation with increasing temperature. At 1050 ℃, the recovered metals were nickel (41 wt%) and cadmium (12.9 wt%). Benzene and toluene, which were not detected with the other secondary waste batteries, were detected in the gaseous product. The results of this study can be used as basic data for future research on the dry recycling process of spent secondary batteries.

• Journal of Korea Water Resources Association
• /
• v.54 no.3
• /
• pp.181-190
• /
• 2021

In this study, a large-scale levee breach experiment from lateral overflow was conducted to verify the effect of the new reinforcement method applied to the levee's surface. The new method could prevent levee failure and minimize damage caused by overflow in rivers. The levee was designed at the height of 2.5 m, a length of 12 m, and a slope of 1:2. A new material mixed with biopolymer powder, water, weathered granite, and loess in an appropriate ratio was sprayed on the levee body's surface at a thickness of about 5 cm, and vegetation recruitment was also monitored. At the Andong River Experiment Center, a flow (4 ㎥/s) was introduced from the upstream of the A3 channel to induce the lateral overflow. The change of lateral overflow was measured using an acoustic doppler current profiler in the upstream and downstream. Additionally, cameras and drones were used to analyze the process of the levee breach. Also, a new method using 3D point cloud for calculating the surface loss rate of the levee over time was suggested to evaluate the performance of the levee reinforcement method. It was compared to existing method based on image analysis and the result was reasonable. The proposed 3D point cloud methodology could be a solution for evaluating the performance of levee reinforcement methods.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.173-177
• /
• 2011

In this study, the formation of $AlPO_4$-type porous materials from alum sludge was investigated. The materials were synthesized by the reaction of aluminum hydroxide and phosphoric acid with an organic template. Cationic surfactant, natural humic acid, and amino acids were used for the organic template. The residual organic templates were removed by calcination at $600^{\circ}C$ in the air. Powder X-ray diffraction patterns showed the charicteristic patterns of the $AlPO_4$-type porous materials. The morphology of the material was examined using a scanning electron microscopy. The coordination environment of $Al^{3+}$ ion was investigated by $^{27}Al$ MAS NMR technique. Both tetrahedrally and octahedrally coordinated$Al^{3+}$ ions were found in the as-synthesized samples while all $Al^{3+}$ ions were tetrahedrally coordinated in the calcined products. The development of mesopore in the solid material was confirmed by the measurement of BET specific surface area. Finally, they were used for removal of toxic formaldehyde from the air and the formaldehyde molecules were adsorbed on the surface of pores. In conclusion, $AlPO_4$-type porous materials from alum sludge might be applicable in the removal of toxic volatile organic compounds from the air.

• Food Engineering Progress
• /
• v.23 no.2
• /
• pp.118-124
• /
• 2019

This study aims to investigate the physical properties of extruded psyllium husk upon the addition of emulsifiers. Three different emulsifiers-glycerol monostearate (GMS), polyglycerol ester (PGE), and sugar ester (SE)-were added to the mixture of psyllium husk and rice powder before extrusion. Extrusion was performed using a twin-screw extruder at 140℃ die temperature, 200 rpm screw speed, and 16% feed moisture content. The physical properties of psyllium husk extrudates including expansion ratio, specific length, piece density, texture profile, color properties, water soluble index, and water absorption index were evaluated. It was observed that the expansion ratio was the highest while the specific length and piece density were the lowest in the control which had no emulsifiers. Texture profile analysis showed that the apparent elastic modulus and breaking strength were highest in the extrudate with a PGE of 0.1%. The adhesiveness was found to be lowest in the extrudates with an SE of 0.1% and GMS of 0.5%. Lightness value was highest in the extrudate with a PGE of 0.1%. Color difference, water soluble index, and water absorption index were highest in the control. The results reveal that some physical properties of extruded psyllium husk were improved with the addition of emulsifiers. This finding provides useful information for the development of psyllium snacks with good physical characteristics.

• Korean Journal of Food Science and Technology
• /
• v.53 no.1
• /
• pp.34-39
• /
• 2021

This study investigated the anti-cancer effects of Salicornia herbacea L. fractions in human ovarian cancer cells (OVCAR-3). S. herbacea powder was extracted with 95% EtOH and sequentially fractionated with hexane, dichloromethane (DCM), ethyl acetate, butanol, and H2O. Further, the growth inhibitory effects of the six fractions were determined using the MTS assay. The DCM fraction dramatically decreased cell viability. Similarly, the cell cycle was arrested at the subG1 phase in DCM-treated cells. To confirm apoptosis, the cells were stained with annexin V/FITC-PI solution. Total, early, and late apoptotic cells were significantly increased in the DCM fraction. The mRNA expression of Bcl-2 was reduced, whereas the pro-apoptotic factors Bax and Bak were increased in DCM fraction-treated cells. These results indicated that the DCM fraction in S. herbacea exhibited strong apoptotic effects through the p53-dependent signaling pathway.

• Clean Technology
• /
• v.26 no.4
• /
• pp.263-269
• /
• 2020

Zeolite was synthesized hydrothermally using the water-treatment sludge, and the effects of various synthesis parameters like reaction temperature, reaction time, and Na2O/SiO2 molar ratio on the crystallization of zeolite were investigated. Crystal structure, physical property, and thermal stability of zeolite crystals were characterized by X-ray powder diffraction, FTIR spectroscopy, BET nitrogen adsorption, and TGA measurements. The removal efficiencies of nitrogen in ammonia, heavy metal ions, and TOC were calculated to evaluate zeolite's adsorption capacity. The primary chemical composition of water-treatment sludge was 28.79% Al2O3 and 27.06% SiO2. The zeolites were synthesized by merely employing the water-treatment sludge as silica and alumina sources without additional chemicals. Zeolite crystals synthesized through the water-treatment sludge were confirmed as an A-type zeolite structure. Zeolite A had the highest crystallinity obtained from a gel with the molar composition 2.1Na2O-Al2O3-1.6SiO2-65H2O after 5 h at a temperature of 90 ℃. The specific surface area of zeolite obtained was 55 ㎡ g-1, which was higher than commercial zeolite A. The removal efficiency of nitrogen in ammonia was 68% after 3 h of reaction time, while the removal efficiencies of Pb2+ and Cd2+ ions were 99.1% and 99.3%, respectively. These results indicate active ion exchange between Pb2+ or Cd2+ ion and Na+ ion in the zeolite framework. The adsorption experiments on the different zeolite addition conditions were performed for 3 h with 300 ppm humic acid. Based on the results, TOC's highest efficiency was 83% when 5 g of zeolite was added.