• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.898-900
• /
• 2006

China's PM has made great progress both in the research and development of new materials and large scale production, and has played a more and more important role in the world powder metallurgy industry. In this paper, the status quo of advanced PM materials, and traditional PM industries in China, will be discussed.

• Journal of Powder Materials
• /
• v.1 no.1
• /
• pp.1-3
• /
• 1994

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.901-902
• /
• 2006

Powder forging has progressed in three decades through the stages of incubation, growth, and maturity, now accounting for 8% of the $5 B global PM market. In this presentation, a history of the technical development of powder forging will be recounted, from early failed attempts and misconceptions, through seminal academic and industrial research, to technical and commercial success. Discussion covers the contributions of government and industrial funding, fundamental knowledge development, and industrial champions for successful implementation. The focus is on lessons learned that may be beneficial to the transition of other technologies for the powder metallurgy industry.

• Journal of Powder Materials
• /
• v.2 no.1
• /
• pp.66-71
• /
• 1995

• Journal of Powder Materials
• /
• v.18 no.4
• /
• pp.313-321
• /
• 2011

• Journal of Powder Materials
• /
• v.19 no.1
• /
• pp.72-78
• /
• 2012

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.740-741
• /
• 2006

The achievement of high density at reasonable cost is one of the major challenges of the P/M industry. One of the key factors contributing to the compressibility of a mix is the lubricant. New experimental lubricants enabling higher green density by conventional compaction or temperature-controlled die compaction were identified. The compaction and ejection characteristics of these new lubricants as measured with a fully instrumented lab press are presented and compared to that of conventional lubricants.

• Journal of Powder Materials
• /
• v.21 no.3
• /
• pp.235-240
• /
• 2014

The basis of the cobalt demand analysis by use was established via the investigation and analysis of the cobalt materials flow, and the overall cobalt metal material and parts industry structure in Korea was examined to determine the cobalt material flow. The markets of the cobalt material for machinery were studied, including their interrelations, via market and study trends, and relevant plans were examined. The results of the study indicated that the advanced core technology for advanced industry and technology-intensive industry development is required to structurally innovate the parts materials and basic materials industries and to upgrade the catch-up industry structure to the new frontier structure.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1269-1270
• /
• 2006

Mg-Zn-RE alloys had a novel lond period stacking ordered (LPO) structure. Their rapidly solidified powder metallurgy (RS P/M) alloys exhibited a combination of high strength and god ductility (tensile yield strength above 550 MPa and elongation above 5%). The LPO Mg-Zn-RE RS P/M alloys had high elevated temperature strength (tensile yield strength above 380 MPa at 473 K) and exhibited a high-strain-rate superplasticity at higher temperatures. In Japan, a national project for developing high strength LPO Mg-Zn-RE RS P/M alloys has started at 2003 for 5 years, which is founded by the Ministry of Economy, Trade and Industry (METI) of Japan. In the national project, project targets in materials performances have been achieved. The developed LPO Mg-Zn-RE RS P/M alloys exhibited higher tensile yield strength, fatigue strength and corrosion resistance than high strength aluminum alloys of extra-super-duralumin (7075-T6).

• Journal of Powder Materials
• /
• v.9 no.4
• /
• pp.261-266
• /
• 2002

CAE technology is an integrated tool including all aspects such as powder, binder system, mixing, injection molding, debinding and sintering. Therefore, CAE technology is considered as one of core technologies for PIM industry in the future. Recently many researchers are developing not only CAE software itself but also application procedures of CAE software. In this study, the applications for CAE technology in PIM industry are presented including feedstock mixing effect, several cases of troubleshooting and optimization procedure.