• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.488-490
• /
• 2008

This study aims to design the high-capacity vol-oxidizer using simulated fuels instead of spent nuclear fuels. Simulated fuels are fabricated by blending tungsten powder with silicon carbide powder, and thereafter, paraffin coating covers simulated fuels to increase their strength. An oxidation experiment using simulated fuels have been carried out in order to analyze oxidation characteristics similar to spent fuels. After oxidation, simulated fuels were almost oxidized to be powders. Increased volume of simulated fuels approached to spent fuels. These results can be utilized as important informations for designing a high-capacity vol-oxidizer.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.305-306
• /
• 2023

Recently, as the radioactive waste disposal facility becomes scarce, the importance of efficient disposal of waste from nuclear power plants is increasing. This study was conducted to utilize radioactive waste concrete powder as solidifying agent for radioactive waste treatment. Paste with an age of more than one year was used with a disk mill to have a particle size of 150㎛ or less, and treated at temperatures of 500℃, 600℃ and 700℃ for 2 hours. In order to simulate the radioactive cement powder, aqueous solutions of Di-water, CsCl 1M, SrCl₂ 1M and CoCl₂ 1M were used as blending water at W/C 0.7 and to improve fluidity, polycarboxylate type superplasticizer was used at 0.4 wt.% based on the weight of recycled cement paste powder. Characterisation was carried out using vicat method, strength and density.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.10a
• /
• pp.15-20
• /
• 1991

High-strength concrete were produced with super-plasticizer, silica fume, fly ash and blast furnace slag powder. Topics investigated inclued mix proportion, and effects of unit weight of binder, W/C ratio, additive type on the physical properties of high-strength concrete. As the result, at 20% of silica fume, unit weight of binder 700kg/$\textrm{m}^3$ and W/C=0.24, 28days compressive strength of concrete was over 1,000kgf/$\textrm{cm}^2$. And in cases of blending with silica fume 10% and fly ash or slag 10%, it was able to produce economical high-strength concrete with 28 days strength similar to silica fume 20% only, and higher strength after 90days.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.166-171
• /
• 2007

The characterization of monolithic SiC and SiCf/SiC composite materials fabricated by NITE and RS processes was investigated in conjunction with the detailed analysis of their microstructure and density. The NITE-SiC based materials were fabricated, using a SiC powder with average size of 30 nm. RS- SiCf/SiC composites were fabricated with a complex slurry of C and SiC powder. In the RS process, the average size of starting SiC particle and the blending ratio of C/SiC powder were $0.4\;{\mu}m$ and 0.4, respectively. The reinforcing materials for /SiC composites were BN-SiC coated Hi-Nicalon SiC fiber, unidirectional or plain woven Tyranno SA SiC fiber. The characterization of all materials was examined by the means of SEM, EDS and three point bending test. The density of NITE-SiCf/SiC composite increased with increasing the pressure holding time. RS-SiCf/SiC composites represented a great decrease of flexural strength at the temperature of $1000\;^{\circ}C.$

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.495-496
• /
• 2006

The kneading process and formulations of feedstock obviously affect the quality of MIM products. In the present work, the rheological behaviour of the composite MIM feedstock, metal matrix (Cu) with few additions of ceramic powders $(Al_2O_3)$, was measured by a self-designed/manufactured simple capillary rheometer. Experimental results show that the distribution between powders and binder is more uniformly when blending time increased. Though high powder loading will increase the feedstock viscosity, the fluidity reveals relatively stable through the load curves of extrusion. Besides, the temperature-dependence of viscosity of the feedstock approximately follows an Arrehnius equation. Basing on Taguchi's method, the kneading optimization conditions and the rheological model of the feedstock were established, respectively.

• Clean Technology
• /
• v.15 no.3
• /
• pp.180-185
• /
• 2009

The ethylene-propylene rubber (EPDM) scrap generated from automobile weatherstrip manufacturing process was used to make a thermoplastic elastomer through blending with polypropylene. The surface activated EPDM powder was obtained by the high temperature and shear pulverizer. The addition of surfactant resulted in more surface activated EPDM powder and the optimum loading amounts of surfactant was 1.5 phr. Maleic anhydride was grafted onto polypropylene by reactive blending to give functionalized polypropylene. The wetting property between EPDM scrap and polypropylene was improved by the addition of poly (ethylene-co-acrylic acid) as a compatibilizing agent. Poly(ethylene-co-acrylic acid) decreased the surface tension of polypropylene and thus would contribute to the wettability with EPDM powder.

• Korean journal of food and cookery science
• /
• v.29 no.3
• /
• pp.223-231
• /
• 2013

This study was carried out for the purpose of inquiring into the effects on shelf-life, quality characteristics, and antioxidant activities, of Majakgwa. This study also regards to the use fermented turmeric powder at varying concentrations in the recipe. The proximate composition of fermented turmeric powder, crude fat, carbohydrate, crude protein, and crude ash was decreased. Viewed division compared to the freeze-dried turmeric curcumin content was increased during fermentation due to the increase of mineral content. With an increased of the amount of fermented turmeric powder used in Majakgwa recipes, the pH of the dough was higher than that of the controlled group. The acid value of Maejakgwa was lowered down, and most effectively controled when adding Turmeric power by 3~6%, and the peroxide value shows high antioxidant ability from the initial storagr period when adding 6%. TBA value appears to have the highest antioxidant ability, when adding 6%, showing lower increasing rate than that of sample group added 0~3% Turmeric powder. When added 9% or more, however, it shows higher TBA value comparing with normal Maejakgwa, the reference group, which indicates on the contrary that the antioxidant ability is lowering. The bitter taste, exterior color, incense of Turmeric, solidity, and crispy level of Maejakgwa with fermented Turmeric powder have been increased significantly as per increase of fermented Turmeric powder, and the sample group added with 9% have shown the best result in the overall taste level. It is anticipated that adding 6~9% of fermented Turmeric powder can increase the storage capability to give the best taste level and effective antioxidant ability by minimizing the off-flavor and bitter taste, through the research as above, which would be the most appropriate blending ratio of Turmeric powder for producing Maejakgwa.

• Journal of Welding and Joining
• /
• v.32 no.5
• /
• pp.65-71
• /
• 2014

Atmospheric plasma spraying (APS) is world-widely used process in the automotive industry as a method to provide wear resistance coatings for engine cylinder bore, using various materials. The weight of engine blocks can be considerably decreased by removing cast iron liners, which can finally result in the improvement of fuel efficiency. In this study, five kinds of powder materials, 1.2C steel powder and 1.2C steel powder mixed with 5, 10, 15, 20 wt.%. molybdenum powder, were deposited by atmospheric plasma spraying in order to investigate the effect of molybdenum on the wear resistance of coatings. Microstructural analysis showed that molybdenum splats were well distributed in 1.2C steel matrix with intimate bonding. The molybdenum added coatings showed better tribological properties than 1.2C steel coating. However, above the 15 wt.%. blending fraction, wear resistance was somewhat degraded with poor roughness of worn surface due to the brittle fracture occurred in molybdenum splats. Consequently, compared to conventional liner material, gray cast iron, 10 wt. pct. molybdenum blended 1.2C steel coating showed much better tribological properties and therefore it looks very feasible to replace gray cast iron liner.

• Elastomers and Composites
• /
• v.50 no.4
• /
• pp.245-250
• /
• 2015

Recycling of ethylene-propylene-diene terpolymer (EPDM) scrap was tried by blending with polypropylene (PP). EPDM scrap powder was prepared by shear pulverization process at high temperature, which may lead to selective chain scission induced by difference in the critical elastic coefficient. On the other hand, EPDM scrap powder was prepared by adding a selected reclaiming agent during shear pulverization process at high temperature. Terpene as a bonding agent was then introduced to improve adhesion property. PP, used as a matrix for manufacturing thermoplastic elastomer, was modified by the incorporation of dicumyl peroxide and maleic anhydride. The functionalized EPDM and modified PP were blended and cured dynamically at $190^{\circ}C$. The blend materials prepared in this study showed the comparable results to those of conventional TPE in terms of tensile and flow properties. Also, the odor component of recycled EPDM was analyzed using GC-MS.

• Journal of Powder Materials
• /
• v.25 no.6
• /
• pp.487-493
• /
• 2018

The impact of different mixing methods and sintering temperatures on the microstructure and piezoelectric properties of PZNN-PZT ceramics is investigated. To improve the sinterability and piezoelectric properties of these ceramics, the composition of $0.13Pb((Zn_{0.8}Ni_{0.2})_{1/3}Nb_{2/3})O_3-0.87Pb(Zr_{0.5}Ti_{0.5})O_3$ (PZNN-PZT) containing a Pb-based relaxor component is selected. Two methods are used to create the powder for the PZNN-PZT ceramics. The first involves blending all source powders at once, followed by calcination. The second involves the preferential creation of columbite as a precursor, by reacting NiO with $Nb_2O_5$ powder. Subsequently, PZNN-PZT powder can be prepared by mixing the columbite powder, PbO, and other components, followed by an additional calcination step. All the PZNN-PZT powder samples in this study show a nearly-pure perovskite phase. High-density PZNN-PZT ceramics can be fabricated using powders prepared by a two-step calcination process, with the addition of 0.3 wt% MnO2 at even relatively low sintering temperatures from $800^{\circ}C$ to $1000^{\circ}C$. The grain size of the ceramics at sintering temperatures above $900^{\circ}C$ is increased to approximately $3{\mu}m$. The optimized PZNN-PZT piezoelectric ceramics show a piezoelectric constant ($d_{33}$) of 360 pC/N, an electromechanical coupling factor ($k_p$) of 0.61, and a quality factor ($Q_m$) of 275.