• Journal of Pharmaceutical Investigation
• /
• v.39 no.1
• /
• pp.29-36
• /
• 2009

Since the quality of final products is significantly affected by the homogeneity of powder mixture, the powder blending process has been regarded as one of the critical pharmaceutical unit processes, especially for solid dosage forms. Accordingly, the monitoring to determine a blending process' end-point based on a faster and more accurate in-line/on-line analysis has attracted enormous attentions recently. Among various analytical tools, NIR (near-infrared) spectroscopy has been extensively studied for PAT (process analytical technology) system due to its many advantages. In this study, NIR spectroscopy was employed with an optical fiber probe for the in-line monitoring of fluid-bed blending process. The position of the probe, the ratio of binary powder mixture, the powder size differential and the back-flush period of the shaking bag were examined as principal process parameters. During the blending process of lactose and mannitol powders, NIR spectra were collected, corrected, calibrated and analyzed using MSC and PLS method, respectively. The probe position was optimized. A reasonable end-point was predicted as 1,500 seconds based on 5% RSD value. As a consequence, it was demonstrated that the blending process using a fluid-bed processor has several advantages over other methods, and the application of NIRS with an optical fiber probe as PAT system for a fluid-bed blending process could be high feasible.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.3
• /
• pp.191-196
• /
• 2003

The purpose of this study was to propose the optimal blending ratio of honey, dextrose syrup and salt with regard to the amount of soybean powder for the manufacture of soybean Dasik. For the establishment of addition amount of honey, dextrose syrup and salt, the sensory characteristics were compared in relation to the physiochemical characteristics and color values. The results were summarized as follows: Soybean Dasik contained 16.77 % protein. As the results of sensory evaluation in according to color values, taste and moistness, the optimal blending ratio of honey and dextrose syrup was 80~90%, and that of salt 0.06% in proportion to the total weight of soybean powder. As the test results of mechanical characteristics, hardness of soybean Dasik decreased as the increasing of the addition amount of honey and dextrose syrup. Cohesiveness, gumminess, brittleness and springiness did not show any significant differences statistically. Lightness(L) decreased as the increasing of addition amount of honey and dextrose syrup. Redness(a) was high at the 90% addition level, but yellowness(b) not significantly different at the 70, 80 and 90% level of honey and dextrose syrup to the total weight of soybean powder. Therefore, the optimal blending ratio of soybean Dasik was proposed at the levels of 45% honey, 45% dextrose syrup and 0.06% salt to the total weight of soybean powder.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.220-225
• /
• 2003

Generally, liquid radioactive wastes generated in nuclear power plant exist in powder form which do not contain moisture through the evaporating process of the Liquid Waste Management System and drying process of the Concentrated Waste Drying System. This powder form wastes are blended homogeneously with paraffin solidification agent and packed in metal drum to ensure its stability during handling and disposal. However, it was experienced that the powder form wastes were not blended homogeneously and separated into two layers in metal drum, on the other hand, a Portion of powder was adhered and solidified to the Inside parts of facility during the blending process. And the flaw of blending process above would come in case the mole ratio of Boron to Sodium in liquid radioactive wastes exceeds 0.2.

• Research in Plant Disease
• /
• v.15 no.2
• /
• pp.106-111
• /
• 2009

Before transplanting Chinese cabbage seedlings, two kinds of eggshell powder were blended into the soil of cabbage field where the club root pathogen, Plasmodiophora brassicae, was infested. The incidence of clubroot disease, the shoot and root growth of cabbages, and soil pH were examined four times at 10 to 13 days interval from transplanting Chinese cabbage. As results, the cabbages treated with eggshell powder without membrane showed the fastest growth in above ground part, and the lowest disease index for clubroot disease. The cabbages treated with eggshell powder with membrane showed better growth than the cabbages of non-treated check, but lower growth than those treated with eggshell powder without membrane. Soil pH started to increase from 3 weeks after soil blending of eggshell powder, and it reached to above 8.0. However, the soil pH of non-treated check stayed at around 6.8. In the experiment to compare the effect of eggshell powder with other calcium compounds, soil-blending of $CaCO_3$ resulted the lowest disease incidence of 1.7 and the registered fungicide, 'flusulfamide', and the resistant variety 'CR Green cabbage' followed with the incidence of 1.9. Cabbages of non-treated check scored the highest disease incidence, 3.4, and that of eggshell powder without membrane was as high as 2.7. However, the growth of Chinese cabbage showed the different pattern to the disease incidence. Chinese cabbages treated with eggshell without membrane recorded the highest average growth, around 2.1 kg. On the other hand, the average growth of CR Green Chinese cabbage was about 2.0 kg, that of flusulfamide-treatment plot was 1.7, and that of non-treated check was as low as 1.3 kg. Soil blending of eggshell powder without membrane did not inhibit the development of clubroot, but increased the growth of cabbage to a great extent. Therefore, it was confirmed that soil blending of eggshell powder before transplanting makes the Chinese cabbage culture possible even in the field infested with club root pathogen.

• Research in Plant Disease
• /
• v.14 no.3
• /
• pp.193-200
• /
• 2008

Blending of eggshell powder into soil as ratio of 1:5, 1:10, 1:15, 1:20, and 1:25 did not affect seed germination rates of several crops including Chinese cabbage. The blending increased pH of distilled water and decreased the viability of resting spores of Plasmodiophora hrassicae. The ratio of non-viable resting spores in eggshell-blending water was over five times higher than in distilled water of the same pH. Chinese cabbage (cv. 'Norangbom') grew more in eggshell-blended soil than in non-treated soil, but other crops grew less. Leaf numbers and above ground growth of Norangbom increased to around 150% and 470%, respectively, in soil blended with $1:20{\sim}1:15$ of eggshell powder. Even though the optimum sizes of eggshell powder were $0.8{\sim}2.0mm$ for growth and smaller than 0.4 mm for inhibition of clubroot disease of Chinese cabbage, there was no statistical difference among the sizes. Soil pH was above 8.0 in all eggshell treatments without any statistical difference among them. Eggshell powder blending to 1:20 showed lower control efficacy, 58.5%, than registered fungicide 'Hokanna (flusulfamide)', 78.5%. However, Chinese cabbage of that blending ratio recorded the highest growth among the treatments. Therefore, blending of eggshell powder into clubroot-contaminated soil may make culture of Chinese cabbage possible by growth-increasing, even though eggshell powder could not inhibit clubroot disease entirely.

• Journal of Powder Materials
• /
• v.21 no.3
• /
• pp.179-184
• /
• 2014

In this study, we prepare polymer solar cells incorporating organic ligand-modified Ag nanoparticles (O-AgNPs) highly dispersed in the P3HT:PCBM layer. Ag nanoparticles decorated with water-dispersible ligands (WAgNPs) were also utilized as a control sample. The existence of the ligands on the Ag surface was confirmed by FT-IR spectra. Metal nanoparticles with different surface chemistries exhibited different dispersion tendencies. O-AgNPs were highly dispersed even at high concentrations, whereas W-AgNPs exhibited significant aggregation in the polymer layer. Both dispersion and blending concentration of the Ag nanoparticles in P3HT:PCBM matrix had critical effects on the device performance as well as light absorption. The significant changes in short-circuit current density ($J_{SC}$) of the solar cells seemed to be related to the change in the polymer morphology according to the concentration of AgNPs introduced. These findings suggested the importance of uniform dispersion of plasmonic metal nanoparticles and their blending concentration conditions in order to boost the solar cell performance.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.706-707
• /
• 2006

Premixes treated with a binder, such as in the FLOMET process, exhibit better flow, reduced dusting and segregation and improved productivity and part consistency compared to conventional premixes. The binder treatment is highly suitable for high performance P/M applications which often require premixes containing very fine alloying additives and excellent die filling characteristics. With this process, various binders and lubricants can be utilized in order to make premixes with unique properties. In this paper, the characteristics and performances of bonded premixes are reported.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.684-685
• /
• 2006

In the present study, the powder metallurgical fabrication of $Bi_{0.4}Te_3Sb_{1.6}$ thermoelectric materials has been studied with specific interest to control the microstructure by the mechanical grinding process. The $Bi_{0.4}Te_3Sb_{1.6}$ thermoelectric powders with a various particle size distribution were prepared by the combination of the mechanical milling and blending processes. The specific electric resistivity of the $Bi_{0.4}Te_3Sb_{1.6}$ sintered bodies mainly depended on the orientation of the crystal structure rather than the particle size of the raw powders.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.128-134
• /
• 2005

This study was performed to evaluate the strength and durability properties of recycled concrete containing water - redispersible copolymer powder(WRP) and blast furnace slag powder(BSP) [RCWS]. Material used were cemente, recycled coarse aggregare, natural fine aggregate, water-redispersible copolymer powder, blast-furnace slag powder. Especially, Water-redispersible powder was used for blending with Inorganic binders such as cemente, gypsum and hydrated lime etc. First of all, Mixed ratio method of RCWS made Two Type. One was called type-1 which used to BSP content 5% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. Another was called Type-2 which used to BSP(blast furnace slag powder)content 10% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. According to the experimental results of (RCWS), Incase Type-2 at curing age 28days, Compressive strength, pulse velocity and dynamic modulous of elasticity were shown higher than Type-1 and The more WRP content increasing($0%{\sim}6%$) was the lower Compressive strength, Pulse velocity and Dynamic modulous of elasticity. Water absorption ratio was in the range of $3.85%\;{\sim}\;3.23%$, it was almost equal to Type-1, 2 but Increasing the WRP content($0%{\sim}6%$), The water absorption ratio is decreased.

• Membrane and Water Treatment
• /
• v.7 no.5
• /
• pp.417-431
• /
• 2016

Poly(vinylidene fluoride) (PVDF) powder was treated with aqueous sodium hydroxide to obtain partially defluorinated fluoropolymers with expected properties such as improving hydrophilicity and fouling resistance. Raman spectrum and FT-IR results confirmed the existence of conjugated carbon double bonds after alkaline treatment. As the concentration increased, the degree of defluorination increased. The morphology and structure of membranes were examined. The permeation performance was investigated. The results showed that membrane's hydrophilicity increased with increase of the percentage of alkaline treated PVDF powder. Moreover, in terms of the water contact angle, it decreased from $92^{\circ}$ to a minimum of $68^{\circ}$; while water up take increased from 128 to 138%. Fluxof pure water and the cleaning efficiency increased with the increase of alkaline treated PVDF powder. The fouling potential also decreased with the increase of the percentage of alkaline treated PVDF powder. The reason that makes blending PVDF show different characteristics because of partial defluorination, which led the formation of conjugated C = C bonds and the inclusion of oxygen functionalities. The polyene structure followed by hydroxide attack to yield hydroxyl and carbonyl groups. Therefore, the hydrophilicity of blending membrane was improved. The SEM and porosity measurements showed that no obvious variations of the pore dimensions and structures for blend membranes were observed. Mechanical tests suggest that the high content of the alkaline treated PVDF result in membranes with less tolerance of tensile stress and higher brittleness. TGA results exhibited that the blend of alkaline treated PVDF did not change membrane thermal stability.