• Clean Technology
• /
• v.27 no.4
• /
• pp.306-314
• /
• 2021

Grape skins are a natural resource rich in antioxidants, but people only eat grape flesh and have discarded the skins. This study investigated the possibility of using grape skin extract as a raw material for functional cosmetics. The dried grape skin powder was put in distilled water and stirred for 1 h, and then the supernatant separated from the solid was used as an extract. The extract yield was 17.8 ~ 31.4%, and the total flavonoid and polyphenol contents in the extract were 1.8 ~ 2.5 mg-QE g-extract^-1 and 16.9 ~ 20.3 mg-GAE g-extract^-1, respectively. The extract effectively removed radicals of DPPH and ABTS, and the degree of scavenging increased with the concentration of the extract. The extract inhibited the collagen hydrolysis activity of collagenase, and the activity inhibition rate increased to 84.2% as the extract concentration increased. However, notable inhibition of tyrosinase by the extract was not found. As the extract of Chamaecyparis obtusa was added to the grape-skin extract, the tyrosinase inhibition rate increased, but the DPPH radical scavenging activity decreased. This study found that grape skin extract has a high antioxidant capacity and anti-wrinkle effect but a low whitening effect. However, by mixing the grape skin extract with the extract of C. obtusa in an optimal ratio, the whitening effect was improved with excellent antioxidant and anti-wrinkle effects.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.44-52
• /
• 2021

This study investigated the effect of the type of alkaline precipitant used on the synthesis of lithium hydroxide by examining the behavior of lithium hydroxide produced using lithium sulfate recovered from a waste lithium secondary battery as a raw material. The double-replacement reaction (DRR) process was used to remove the impurities contained in the lithium salt precursor of lithium sulfate and to improve the efficiency of the synthesis of lithium hydroxide. The experiment was conducted by control the molar ratio of the precursor ([Li]/[OH]), the reaction temperature, and the composition of the alkaline precipitant (KOH, Ca(OH)2, Ba(OH)2) used for the production of highly-crystalline lithium hydroxide. A secondary solid-liquid separation was performed following the reaction to remove the impurities generated, and the purified aqueous solution of lithium hydroxide was evaporated to remove the moisture and obtain the product as a powder. The crystallinity and synthesis behavior of the product were examined.

• Clean Technology
• /
• v.25 no.2
• /
• pp.101-106
• /
• 2019

The aim of this study is to investigate the feasibility of an Ni-SA catalyst, which was prepared from nickel, kieselguhr, and alumina, for the hydrogenation of triglyceride in a bench-scale reactor. Ni-SA powders were prepared by precipitating nickel precursors on a silica and alumina support. The powder was reduced in a hydrogen flow, mixed with a saturated palm oil, and then cooled to prepare an Ni-SA catalyst tablet. The sizes of NiO crystals of a commercial Pricat catalyst and the Ni-SA catalyst prepared in this study were $35{\AA}$ and $38{\AA}$, respectively. The pore volume and pore size of the Ni-SA catalyst was much larger than the pore volume and pore size of the Pricat catalyst. In addition, the average particle size of the Ni-SA catalyst was much smaller than that of the Pricat catalyst. The triglyceride hydrogenation reaction was carried out in a semi-batch reactor using catalysts impregnated with oil and molded into tablets. It was found that the Ni-SA catalyst was superior to the commercial Pricat catalyst in triglyceride hydrogenation, which could be ascribed to the raw material and the products being less influenced by the diffusion resistance in the pores of the Ni-SA catalyst. The Ni-SA catalyst prepared in this study has the potential to replace the Pricat catalyst as a catalyst for use in the commercial process for hydrogenation of triglyceride.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.160-171
• /
• 2019

The sword with a ring pommel, which was excavated from the first stone chamber of the ancient tombs of Jeongchon Village in Naju, is a sword with a pentagon undecorated ring pommel consisting of a mother sword and two child swords. The sword with an undecorated ring pommel of Jeongchon comprises a ring pommel, a hilt, a knife, and a knife end decoration. This sword was coated with lacquer. The ring pommel is an iron frame covered with silver plate; however the silver tarnished into a light purple due to silver chloride corrosion, and iron corrosion originated from the inside is visible on the surface. Silver chloride corrosion is produced when silver objects are exposed to water, dissolved salts, and dissolved chloride ions when in a buried state. It changes objects into powder, making it difficult to preserve original shapes. The other silver artifacts found in the Jeongchon ancient tombs show similar signs of corrosion. The results of X-ray irradiation and a CT analysis showed that the sword had a ring at the end of the handle, a T-shaped hilt, and was probably connected to the handle end of a knife. If the shape of the mother sword can be inferred from the child swords, the mother sword had a ring pommel, decorations of the handle, covered with silver plate, and a gold ring and a silver line wound around the handle. It is assumed that the ring pommel was connected to the knife by welding because no holes were observed. The end decoration of the knife was made by using an iron plate formed into a shape, half covered by silk, and the other half decorated with silver plate and a gold ring. The sword with an undecorated ring pommel excavated from the ancient tombs of Jeongchon Village comprises the metals of gold, silver, and iron, and includes features of Baekje, Silla, and Gaya, which highlights the influence of surrounding historic sites and various cultures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.497-502
• /
• 2019

Metal oxide nanostructures are promising materials for advanced applications, such as high sensitive gas sensors, and high capacitance lithium-ion batteries. In this study, tin oxide (SnO) nanostructures were grown on a Si wafer substrate using a two-zone horizontal furnace system for a various substrate temperatures. The raw material of tin dioxide ($SnO_2$) powder was vaporized at $1070^{\circ}C$ in an alumina crucible. High purity Ar gas, as a carrier gas, was flown with a flow rate of 1000 standard cubic centimeters per minute. The SnO nanostructures were grown on a Si substrate at $350{\sim}450^{\circ}C$ under 545 Pa for 30 minutes. The surface morphology of the as-grown SnO nanostructures on Si substrate was characterized by field-emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). Raman spectroscopy was used to confirm the phase of the as-grown SnO nanostructures. As the results, the as-grown tin oxide nanostructures exhibited a pure tin monoxide phase. As the substrate temperature was increased from $350^{\circ}C$ to $424^{\circ}C$, the thickness and grain size of the SnO nanostructures were increased. The SnO nanostructures grown at $450^{\circ}C$ exhibited complex polycrystalline structures, whereas the SnO nanostructures grown at $350^{\circ}C$ to $424^{\circ}C$ exhibited simple grain structures parallel to the substrate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.458-463
• /
• 2019

Palladium (Pd) is widely used as a catalyst and noxious gas sensing materials. Especially, various researches of Pd based hydrogen gas sensor have been studied due to the noble property, Pd can be adsorbed hydrogen up to 900 times its own volume. In this study, palladium oxide (PdO) nanostructures were grown on Si substrate ($SiO_2(300nm)/Si$) for 3 to 5 hours at $230^{\circ}C{\sim}440^{\circ}C$ using thermal chemical vapor deposition system. Pd powder (source material) was vaporized at $950^{\circ}C$ and high purity Ar gas (carrier gas) was flown with the 200 sccm. The surface morphology of as-grown PdO nanostructures were characterized by field-emission scanning electron microscopy(FE-SEM). The crystallographic properties were confirmed by Raman spectroscopy. As the results, the as-grown nanostructures exhibit PdO phase. The nano-cube structures of PdO were synthesized at specific substrate temperatures and specific growth duration. Especially, PdO nano-cube structrures were uniformly grown at $370^{\circ}C$ for growth duration of 5 hours. The PdO nano-cube structures are attributed to vapor-liquid-solid process. The nano-cube structures of PdO on graphene nanosheet can be applied to fabricate of high sensitivity hydrogen gas sensor.

• Journal of Life Science
• /
• v.29 no.1
• /
• pp.69-75
• /
• 2019

Rosemary (Rosmarinus officinalis L.) is widely used as a food material. Although various physiological activities of rosemary have been reported, there have been no studies on the physiological activity of solvent extracts with different polarities. Rosemary extracts were obtained by extraction of dried powder using 0%, 25%, 50%, 70%, and 95% ethanol (EtOH) in distilled water, methanol, ethyl acetate, and hexane. As these ratios of EtOH are generally chosen by default and scarcely optimized, we investigated the impact of the composition of EtOH in distilled water on extract-related characteristics, such as DPPH free radical scavenging and ${\alpha}$-glucosidase inhibition, on the differentiation of 3T3-L1 adipocytes and inhibition of tyrosinase. Adipogenesis inhibition was highest at 70% EtOH. DPPH scavenging activity and inhibition of tyrosinase activity were reduced with 50% EtOH in water. However, inhibition of ${\alpha}$-glucosidase activity was higher in 50% EtOH in water. The best solvents in terms of DPPH scavenging activity, inhibition of tyrosinase and ${\alpha}$-glucosidase, and differentiation of adipocytes obtained with different concentrations of EtOH, although a lower similar activities were found with 50% ethanol. Considering the extraction solvents, a ratio of EtOH in water gives different content and constituents of compounds. These differences will give activities inhibition of adipogenesis, tyrosinase, ${\alpha}$-glucosidase activity, and DPPH scavenging activity.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.383-388
• /
• 2021

In this study, constant head water permeability test was adopted to evaluate self-healing performance of mortars containing inorganic healing materials which consist of blast furnace slag, sodium sulfate and anhydrite. Clinker powder and sand replaced for a part of cement and fine aggregates. On constant head water permeability test for self-healing mortars, unit water flow rate of mortar specimens were measured according to crack width and healing period. As a result of evaluating the healing performance of self-healing mortar, it was confirmed that with the initial crack width of 0.3mm, the healing rate at healing period of 28 days increased by more than 30%p compared to plain mortar, greatly improving the healing performance. Furthermore, the coefficient(α) which was estimated from the relationship between crack width and unit water flow rate was used for calculating equivalent crack width. By analyzing the correlation of healing rate and equivalent crack width, the time and initial crack width attaining healing target crack width were predicted.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.65-72
• /
• 2020

Black dross is a dark gray dross generated during the aluminum recycling process that uses flux, and contains NaCl, KCl, Al2O3, MgO, etc. Black dross is separated into soluble substances (NaCl, KCl) and insoluble substances (Al2O4, MgO) through the dissolution process. Soluble materials can be reused as salt flux, and Al2O3 and MgO can be upcycled to various ceramic materials through the synthesis process. In this study, Mayenite was synthesized using Al2O3 and MgO recovered from black dross, and the synthesis was performed according to the mixing ratio and reaction temperature. It was confirmed that when Mayenite was synthesized using black dross (spinel) and CaCO3, precursors were changed to Mg0.4Al2.4O4 and CaO at 700 ℃, and to Ca12Al14O33 (Mayenite) after 800 ℃. In the mixing conditions experiment, it was confirmed that the Mayenite XRD peak increased with increase of the CaCO3 content, and the Mg0.4Al2.4O4 XRD peak decreased. As a result of the BET analysis of the synthesized powder, the surface area decreased as the fine particles were grown and agglomerated in the process of generating mayenite.

• Journal of Korea Water Resources Association
• /
• v.54 no.3
• /
• pp.181-190
• /
• 2021

In this study, a large-scale levee breach experiment from lateral overflow was conducted to verify the effect of the new reinforcement method applied to the levee's surface. The new method could prevent levee failure and minimize damage caused by overflow in rivers. The levee was designed at the height of 2.5 m, a length of 12 m, and a slope of 1:2. A new material mixed with biopolymer powder, water, weathered granite, and loess in an appropriate ratio was sprayed on the levee body's surface at a thickness of about 5 cm, and vegetation recruitment was also monitored. At the Andong River Experiment Center, a flow (4 ㎥/s) was introduced from the upstream of the A3 channel to induce the lateral overflow. The change of lateral overflow was measured using an acoustic doppler current profiler in the upstream and downstream. Additionally, cameras and drones were used to analyze the process of the levee breach. Also, a new method using 3D point cloud for calculating the surface loss rate of the levee over time was suggested to evaluate the performance of the levee reinforcement method. It was compared to existing method based on image analysis and the result was reasonable. The proposed 3D point cloud methodology could be a solution for evaluating the performance of levee reinforcement methods.