• Journal of the Korean Ceramic Society
• /
• v.51 no.1
• /
• pp.11-18
• /
• 2014

Onggi, which is described as a breathing pottery, has strongly influenced the traditional food culture in Korea. In this study Onggi is compared to porcelains including celadon and white porcelain to analyze the sources of pore formation. The differences in starting materials are examined for chemical and mineralogical compositions, particle size and distribution. The gas permeability of the fired samples is correlated to the matrix microstructure. The broad particle size distribution and high iron oxide content of Onggi are revealed as the major cause for the pore formation. Open pores are formed with large particles in the Onggi body while closed pores have a high iron oxide concentration. The Onggi body with increased open pores leads to the high gas permeability.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.2
• /
• pp.124-131
• /
• 2004

The adsorption of heavy metals in the waste water carried out on the various domestic clays and waste pottery. The effect of parameters such as pH, temperature, adsorption time and coexisting cations on the adsorption ability and characteristics were investigated to find out whether the clays could be used as adsorbents. Adsorption equilibrium was reached within 20 minutes on all the clays. The optimum pH was found to be above 5. When other cations such as Cu(II) or Zn(II) coexisted with Pb(II), the adsorption amount of Pb(II) decreased because of competing adsorption.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.452-459
• /
• 2008

The compressed injection yellow ocher soil is the process-technology by drying the product through sunshine, not by firing like pottery and ceramic ware. It is the technology of development being able to achieve the far infrared ray and humidity adjustment by adding recycling paper, Korean paper and bamboo salt, and it corresponds with the construction enforcement ordinance 2007 as an interior-finishing product which is fire-resistant. In case that the yellow ocher soil would be used as lighting device and interior-finishing material and decoration, it could contribute to an improvement of National Health by avoiding the sick house syndrome and adding humidity adjustment, and it has more efficient economic effect due to using recycle-available additives. Through such developments of the yellow ocher soil products the domestic market of lighting device and construction material can be advanced and the replacement effect of imported goods & also export effect can be expected accordingly.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.1
• /
• pp.61-68
• /
• 2023

In North Korea, the production of courage tombs continues, and it is known that the activity rate is higher than that of old tombs. However, pot seedling are planted using hoes and shovels used for planting old tombs with exposed roots and low activity rates. This is believed to result in excessive force when stepping on the container grave with a hoe in the planting process, resulting in the collapse of the container grave or the waste of labor due to the creation of unnecessary planting holes. Therefore, when planting courage graves at North Korean afforestation sites, it is necessary to improve the work of making planting holes using general hoes in a way that improves labor productivity in a more efficient manner. As part of inter-Korean technical cooperation to improve the North Korean afforestation method, this study was conducted with the aim of developing efficient container seedlings and using them for North Korean forest restoration projects. It is believed that developing planting equipment exclusively for container graves for forest restoration in North Korea in South Korea and providing equipment and production technology to North Korea can contribute to the development of forest restoration technology in North Korea. If the Yonggeomyo Development Planting Equipment is provided to North Korea, it will be a realistic inter-Korean forest cooperation project to avoid international sanctions by recognizing the excellence of the development products by directly using its own materials through technical cooperation.

• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.101-114
• /
• 2009

Potsherds and kilns of the AD 3th century excavated from Gundong and Majeon sites, Korea were studied to investigate the production techniques and provenance of potsherds and kilns on the pastes. For potsherds, kilns blocks and in-situ paleo-soils, provenance of raw materials were estimated through mineralogy and geochemistry, while production technique and thermal feature of kilns were investigated through observation of textures and compositions as well as firing experiment on paleo-soils. As a result of study, potsherds and kilns were found to have similar mineralogical compositions as the neighboring paleo-soils and to have same evolution path with that of geochemistry. The potsherds were divided into 3 groups according to firing temperature and production technique. Group 1 consists of reddish stamped pattern pottery with loose textures, which has many pores and contains many iron oxides. Its temper is less than about 0.5mm, and was probably fired between 700 to $800^{\circ}C$. Group 2 contains ash to grayish blue stamped pattern pottery, which has vitrified texture and few pores. Its temper is less than about 0.5mm, and was probably fired from 900 to $1,000^{\circ}C$. However, some potsherd belongs to the group 2 in terms of features for temper and pastes, but it was probably fired over $1,100^{\circ}C$. Group 3 contains reddish and grayish stamped pattern pottery. It has vitrified matrix, few pores and temper consists of polycrystalline quartz and feldspar over 2mm, and it was probably fired around $1,000^{\circ}C$. The kiln had experienced temperature from 600 to $700^{\circ}C$ on the wall, from 900 to $1,000^{\circ}C$ on the bottom, suggesting the function of high temperature firing.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.375-382
• /
• 2016

This study focuses on the shape of the bottle, the Chinese Qing Dynasty porcelain decoration. Consideration given to understand the basic form of the catheter, and the basic division. To study the binding form to the principles of the design work to prepare a lacquer on the basis of the results obtained here. When classified by type illness Qing Dynasty porcelain decorative porcelain six types, semi-porcelain could be classified into five types. Production form to pursue work in this study design is produced in the form of asymmetrical vases object type curve. These bottles of Qing Dynasty porcelain for decoration. The basic type of pottery types and selected six of its basic and applied work. Production design work was produced Hyupjeotae production techniques that facilitate formative representation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.5
• /
• pp.59-69
• /
• 2000

Sludge is generated in the process of water and wastewater treatment, and it has been causing various environmental problems. From this point of view, recycling of sludge appears to be the best way. The firing technology in pottery industry is applied to the sludge treatment , and the final product is called artificial soil. The effect of mixed artificial soil with upland soil was investigated through the crop growth experiment and the physical & chemical characteristics of the mixed soils were analyses. After the growth experiment , mixed soil plots contained more CEC, OM, TN, TP than upland soil plots. This result shows that the artificial soil produced form sludge can be mixed with upland soil, and crop can be increased. From the growth analysis, growth of soybean and corn in the mixed soil plots was better than that in the original upland soil plots. Heavy metals contents in the mixed soil plots were within the quality standard. This is a promising result since in most cases heavy metals are the most concern in the application of sludge product to farmland.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.123-127
• /
• 2003

The effects of process parameters on coating formation and coating properties were investigated using a fused and crushed Ti $O_2$powder by the Taguchi method and L$_{9}$(3$^4$) orthogonal array. The Taguchi analysis was conducted through the results of the coating properties affected strongly by plasma spraying parameters and Ti $O_2$powder was sprayed on Ti-6Al-4V alloy substrate. The coating properties were characterized by thickness, microhardness, porosity and surface roughness using optical microscopy, image analyzer and surface roughness tester respectively. An observed optimum condition of plasma spraying process could be found for potential use as a bioceramic coating.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.103-108
• /
• 2019

The cooling rate and the uniformity of mold temperature, in the injection molding process, possess great influences on the productivity and quality of replications. The conformal cooling channel, which is of a uniform spacing from the mold cavity by the metal additive manufacturing process, receives much attention recently. The purpose of this study is to develop a mold core with a curved conformal cooling channel for a pottery-shaped thick-wall cosmetic container through the hybrid method of direct metal tooling (DMT) process. In this study, we design a mold core that contains the curved cooling channel for the container. A method that divides the cavity is proposed and the DMT process is carried out to form the curved cooling channel. The test mold core, with the curved conformal cooling channel, has been fabricated by the proposed method to confirm the feasibility of the design concept. We show that no leakage is observed for the additive manufactured test mold core, and its physical properties demonstrate that it can be sufficiently used as the injection mold core.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.41-44
• /
• 2004

Hydrophilicity and hydrophobicity of pottery bodies can be controlled via chemical substitution of layered clay with hydrophilic and hydrophobic organics. In this study, organo-clay nanocomposites were prepared by ion-exchange of montmorillonite with dodecylamine and hexadecylamine, respectively. Substitution sites of organics and the interval changes of layered materials are characterized by FT-IR and WAXD and organics amounts loaded and water comtents contained by C/S analysis and TG-DSC. The organics were selectively intercalated so that increase layer interval from 12${\AA}\; to\;16{\AA}$. Organo-modified clay is changed to more hydrophobic comparing to clay itself.