• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.165-172
• /
• 2002

We presents an hazard zonation mapping technique in karst terrain and its assessment. From the detailed engineering geological mapping. Controlling factors of sink hole and limestone cave formation were discussed and 4 main hazard factors affecting hazard potential are identified as follows: prerequisite hazard factor(distributions of pre-existing sink holes and cavities), geomorphological hazard factors(slope gradient, vegetation, and drainage pattern etc.) geological hazard factors(lithology, fracture patterns and geological structures etc.) and hydraulic conditions(hydraulic head, annual fluctuation of ground water table and composition of g/w water). From the construction of hazard zonation map along the Jecheon-Maepo area, and vertical cross-sectional hazard zonations specific tunnel site we suggest hazard zonation rating systems.

• Steel and Composite Structures
• /
• v.33 no.2
• /
• pp.209-224
• /
• 2019

This paper describes a study of the mapping relationship between the vertical deformation of bridge structures and rail deformation of high-speed railway, taking the interlayer interactions of the bridge subgrade CRTS II ballastless slab track system (HSRBST) into account. The differential equations and natural boundary conditions of the mapping relationship between the vertical deformation of bridge structures and rail deformation were deduced according to the principle of stationary potential energy. Then an analytical model for such relationship was proposed. Both the analytical method proposed in this paper and the finite element numerical method were used to calculate the rail deformations under three typical deformations of bridge structures and the evolution of rail geometry under these circumstances was analyzed. It was shown that numerical and analytical calculation results are well agreed with each other, demonstrating the effectiveness of the analytical model proposed in this paper. The mapping coefficient between bridge structure deformation and rail deformation showed a nonlinear increase with increasing amplitude of the bridge structure deformation. The rail deformation showed an obvious "following feature"; with the increase of bridge span and fastener stiffness, the curve of rail deformation became gentler, the track irregularity wavelength became longer, and the performance of the rail at following the bridge structure deformation was stronger.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.178-184
• /
• 2023

AI image generation technology has become a popular research direction in the field of AI, which is widely used in the field of digital art and conceptual design, and can also be used in the process of 3D texture mapping. This paper introduces the production process of 3D texture mapping using AI image technology, and discusses whether it can be used as a new way of 3D texture mapping to enrich the 3D texture mapping production process. Two AI deep learning models, Stable Diffusion and Midjourney, were combined to generate high-quality AI textures. Finally, the lmage to material function of substance 3D Sampler was used to convert the AI-generated textures into PBR 3D texture maps. And applied in 3D environment. This study shows that 3D texture maps generated by AI image generation technology can be used in 3D environment, which not only has short production time and high production efficiency, but also has rich changes in map styles, which can be quickly adjusted and modified according to the design scheme. However, some AI texture maps need to be manually modified before they can be used. With the continuous development of AI technology, there will be great potential for further development and innovation of AI-generated image technology in the 3D content production process in the future.

• Journal of the Korean earth science society
• /
• v.25 no.1
• /
• pp.10-21
• /
• 2004

Recently, spatial data integration for geoscientific application has been regarded as an important task of various geoscientific applications of GIS. Although much research has been reported in the literature, quantitative assessment of the spatial interrelationship between input data layers and an integrated layer has not been considered fully and is in the development stage. Regarding this matter, we propose here, methodologies that account for the spatial interrelationship and spatial patterns in the spatial integration task, namely a multi-buffer zone analysis and a statistical analysis based on a contingency table. The main part of our work, the multi-buffer zone analysis, was addressed and applied to reveal the spatial pattern around geological source primitives and statistical analysis was performed to extract information for the assessment of an integrated layer. Mineral potential mapping using multi-source geoscience data sets from Ogdong in Korea was applied to illustrate application of this methodology.

• Korean Journal of Remote Sensing
• /
• v.23 no.4
• /
• pp.287-295
• /
• 2007

A mineral potential map showing the distributions of potential areas for exploration of undiscovered mineral deposits is a kind of predictive thematic maps. For any predictive thematic maps to show reasonably significant prediction results, validation information on prediction capability should be provided in addition to spatial locations of high potential areas. The objective of this paper is to apply prediction rate curves to the estimation of prediction probability of future discovery. A case study for Au-Ag mineral potential mapping using geochemical data sets is carried out to illustrate procedures for estimating prediction probability and for an interpretation. Through the case study, quantitative information including prediction rates and probability obtained by prediction rate curves was found to be very important for the interpretation of prediction results. It is expected that such quantitative validation information would be effectively used as basic information for cost analysis of exploration and environmental impact assessment.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.975-987
• /
• 2021

Potential habitat mapping of Meretrix lyrata which is found in large parts of South East Asian tidal flat was carried out to find out causes of collective death. Frequency Ratio (FR) method, one of geospatialstatistical method, was employed with some benthic environmental factors; Digital elevation model (DEM) made from Landsat imagery, slope, tidal channel distance, tidal channel density, sedimentary facesfrom WorldView-02 image. Field survey was carried out to measure elevation of each station and to collect surface sediment and benthos samples. Potential habitat maps of the all clams and the juvenile clams were made and accuracy of each map showed a good performance, 76.82 % and 69.51 %. Both adult and juvenile clams prefer sand dominant tidal flat. But suitable elevation of adult clams is ranged from -0.2 to 0.2 m, and that of juvenile clams is ranged from 0 to 0.3 m. Tidal channel didn't affect the habitat of juvenile clams, but it affected the adult clams. In the furtherstudy, comparison with case of Korean tidal flat will be carried out to improve a performance of the potential habitat map. Change in the benthic echo-system caused by climate change will be predictable through potential habitat mapping of macro benthos.

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.05
• /
• pp.94-97
• /
• 1991

It is well known that multipoint and computerized intraoperative mapping systems improve the results of surgery for Wolff-Parkinson-White syndrome and show tremendous potential for opening an entirely new era of surgical intervention for the more common and lethal types of supraventricular tachyarrhythmias such as atrial flutter and atrial fibrillation. In addition, the ability to map and ablate the sometimes fleeting automatic atrial tachycardia is greatly enhanced by computerized mapping systems. In this study, we have developed 16 channel computerized data analysis system using microcomputer for basic research of electrophysiology and electrical propagation. This system is expected to enable us to study pathophysiology of cardiac arrhythmia and to improve the results of diagnosis and surgical treatment for cardiac arrhythmia.

• Genomics & Informatics
• /
• v.5 no.1
• /
• pp.32-35
• /
• 2007

Telomerase reverse transcriptase (TERT) is an enzymatic ribonucleoprotein that prolongs the replicative life span of cells by maintaining protective structures at the ends of eukaryotic chromosomes. Telomerase activity is highly up-regulated in 85-90% of human cancers, and is predominately regulated by hTERT expression. In contrast, most normal somatic tissues in humans express low or undetectable levels of telomerase activity. This expression profile identifies TERT as a potential anticancer target. By using an RNA mapping strategy based on a trans-splicing ribozyme library, we identified the regions of mouse TERT (mTERT) RNA that were accessible to ribozymes. We found that particularly accessible sites were present downstream of the AUG start codon. This mTERTspecific ribozyme will be useful for validation of the RNA replacement as cancer gene therapy approach in mouse model with syngeneic tumors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.54-65
• /
• 2000

The purpose of this paper is to examine the concept, general framework, planning process of bioregion, and bioregional impacts on landscape planning of future and to discuss the application possibility of landscape planning. Bioregionalism is defined in the course of following: knowing the land, learning the lore, developing the potential, liberating the self. Bioregional paradigm was composed of policy system insisted on diversity and decentralization based on region and community, sustainable economy structure focused on conservation and stability, and society structure through cooperation with common consciousness in the community. A general bioregional framework was organized to be able to achieve a sustainable future with interaction for humans being, other living things, and important earth life system. Bioregional mapping should be able to explain three important aspects about how localised and sustainable cultures would exist: to define the external boundaries, to describe forces of energy, and give a hint for th productive capability. In conclusion, according to the result of reviewing the total environmental planning, bioregional paradigm, examples of projects, technique of bioregional mapping, and actions of Nongovernmental Organizations(NGOs). this study is helpful to show an applicability of bioregional planning theory in Korea

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.988-990
• /
• 2003

IKONOS image mapping is being considered a possible replacement to the traditional mapping in many countries due to their ease of access to current data and their potential high resolution. Survey Department of His Majesty's Government completed traditional orthophoto mapping of all urban and semi-urban areas of the country. The 1:5000 monochrome orthophoto maps of Kathmandu Valley were completed in 2003. In 2002, as a test, production of a near natural colour Image Map at 1:5000 scale of a part of Kathmandu Valley based on IKONOS data was carried out. A conventional line map plotting of the same area at 1:5000 was also prepared. The objective of the pilot project was to assess the geometric accuracy and the information content of these maps. The details of the study and their results are underlined. The findings of the study helps to explain whether IKONOS image map can replace conventional orthophoto map at 1:5,000 for urban areas of Nepal like Kathmandu.