• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.232-244
• /
• 1997

In this paper weight function theory is extended to the determination of the stress intensity factors for the mode I in elliptic crack. For the calculation of the fundamental fields Poisson's theorem and Ferrers's method were employed. Fundamental fields are constructed by single layer potentials with surface density of crack harmonic fundamental polynimials. Crack harmonic fundamental polynimials up to order four were given explicitly. As an example of the application of the weight function theory the stress intensity factors along crack tips in nearly penny-shaped elliptic crack are calculated.

• Bulletin of the Korean Chemical Society
• /
• 제12권4호
• /
• pp.414-423
• /
• 1991

Effects of light intensity on the steady-state fluorescence quenching kinetics are examined for general cases where the bimolecular quenching can occur via long-range energy transfer processes and the potential of mean force between the energy donor and acceptor molecules is not negligible. Approximate analytic expressions are derived for the steady-state quenching rate constant and for the ratio of the steady-state intensity of unquenched to quenched fluorescence. The analytic results are compared with the exact results obtained from numerical analysis and the results of conventional theories.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.35-39
• /
• 2005

Phosphor powders of zinc gal late added with Mg and rare-earth elements were prepared by sol id state reaction to improve luminescent properties. Green emitting $ZnMnGa_{2}O_{4}$ reached maximum intensity at Mn=0,005 mole$\%$ and further improvement was achieved by addition of $Mg^{2+}$. Tm, Mg-added zinc gallate phosphor exhibited a strong blue band emission, peaking at about 420 nm with the maximum intensity at the concentration of 0.003 mole$\%$ Mg and 0.015 mole$\%$ Tm. Deepening of the potential wells of the ground and excited states was suggested to be the cause for the enhancement in emission intensity at optimal doping of Mg and Tm.

• 지질공학
• /
• 제18권2호
• /
• pp.191-196
• /
• 2008

이 연구는 집중호우시 산사태의 발생가능성과 발생시간을 사전에 예측하기 위한 노력의 일환으로 기존에 개발된 RTI 경보모델을 우리나라에 적용 분석한 사례이다. RTI(Rainfall Triggering Index)는 강우강도(I) 유효 누적강우량($R_t$)의 곱으로 정의되는 것으로서, 강우기간 동안 특정 시간(t)에서 산사태가 발생할 가능성을 평가하는데 사용된다. RTI의 상부임계값($RTI_{UC}$)과 하부임계값($RTI_{LC}$) 과거 산사태 발생시 강우자료 분석을 통해 각 지역별로 설정할 수 있으며, 강우강도가 상부임계값을 초과할 때 실제 산사태가 발생하는 것으로 이해할 수 있다. 이러한 분석은 궁극적으로 향후 집중호우가 내릴 경우 특정지역의 산사태 발생가능성은 물론 산사태 발생시기를 예상할 수 있으며, 이를 토대로 사전에 산사태 발생경보를 발령하는데 중요한 근거로 활용될 수 있다. 이와 같은 이론을 우리나라에 적용하기 위해 2006년 7월 13일부터 7월 19일까지 강원도 인제군 일대에 내린 강우자료와 산사태 발생과의 관계를 분석한 결과, 실제 산사태가 발생한 7월16일 오전 11시경을 기준으로 23시간, 11시간, 9시간 전에 강우강도가 RTI의 상부임계값을 초과하였다. 이를 토대로 이와 같은 세 차례에 걸친 산사태 경보의 발령이 필요하였음을 알 수 있었다.

• Journal of information and communication convergence engineering
• /
• 제9권6호
• /
• pp.738-742
• /
• 2011

This paper has studied drain induced barrier lowering(DIBL) for Double Gate MOSFET(DGMOSFET) using analytical potential model. Two dimensional analytical potential model has been presented for symmetrical DGMOSFETs with process parameters. DIBL is very important short channel effects(SCEs) for nano structures since drain voltage has influenced on source potential distribution due to reduction of channel length. DIBL has to be small with decrease of channel length, but it increases with decrease of channel length due to SCEs. This potential model is used to obtain the change of DIBL for DGMOSFET correlated to channel doping profiles. Also device parameters including channel length, channel thickness, gate oxide thickness and doping intensity have been used to analyze DIBL.

• 대한간호학회지
• /
• 제21권3호
• /
• pp.339-348
• /
• 1991

The study problem was to determine the reliability of the Stewart pain circle measurement tool with Korean subjects. The purpose was to assess the tool for potential use in research in Korea. The subjects were 95 primary school students and 103 university students in Seoul. The study was conducted from May to June 1990, using Stewart's pain color circle tool. To determine the difference in the rated intensity of the order of the pain color circles, statistical mean and standard deviation were employed. Item reliability and test - retest reliability were used to test for reliability. ANOVA and t-test were used to explore for differences in the rated intensity of the order of the pain color circles according to the subjects' general characteristics. The findings were as follows ; 1. Higher level pain intensity was assigned to color circle numbers 2, 4, and 6 (These contain large amounts of color). Lower level pain intensity was assigned to numbers 1, 3, and 5(These contain small amounts of color). Higher and lower levels of pain intensity selection patterns were the same as Stewart's but the highest rating of pain was different. The highest pain intensity rating was given to the color red in this study instead of black as in Stewart's test. 2. University students and primary school students' ratings were not very difteferent. 3. Pain color circle reliability was $\alpha$＝0.3468, Test - retest reliability was supported (t＝0.02~0.97, p＝0.337~0.988) 4. Differences in the rating of the pain intensity order were related to the subjects' age and sex, but not to religion. It was concluded that the pain color circle measurement tool is worth for further study as a research instrument with both Korean adult and child clients for validity and reliability.

• 한국지반환경공학회 논문집
• /
• 제11권2호
• /
• pp.13-21
• /
• 2010

일반적으로 강우는 사면의 전단강도와 전단응력 변화에 의한 사면붕괴를 유발하므로 강우강도와 전단강도의 변화는 사면안정해석시 매우 중요한 요소이다. 다양한 강우강도가 사면내의 함수비 변화차이를 유발할 뿐만 아니라, 사면 내 지반의 점착력 및 마찰력의 변화를 유발한다. 본 연구의 목적은 강우재현 실험장치를 이용하여, 강우강도와 사면의 전단강도의 관계를 규명하는 것이다. 사용된 토양은 국내의 사면에서 채취한 것으로 입도분석을 실시하였으며, 종래의 함수비 측정방법 대신 TDR 센서를 사용하여 함수비를 측정하였고, 전단강도 측정을 위해 비배수 직접전단시험을 하였다. 본 연구에서의 결과를 정리하면 첫째, 함수비는 토양의 투수성과 밀접한 관계를 가지며, 강우지속기간은 토양함수비를 결정하는데 중요한 요소이다. 둘째, 강우재현 실험장치를 이용한 안정성 분석은 사면에서의 함수비와 전단응력의 측정이 가능하여, 매우 유용한 사면해석방법이다. 셋째, 함수비와 관련된 비배수 전단응력식을 제시하였으며, 제시한 식은 기존 연구와 비교하여 보다 간편한 것으로 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.300-308
• /
• 2004

The formation mechanism of anodic oxide films on Mg alloys when anodized in NaOH solution. was investigated by focusing on the effects of anodizing potential. Al content. and anodizing time. Pure Mg and Mg-Al alloys were anodized for 10 min at various potentials in NaOH solutions. $Mg(OH)_2$ was generated by an active dissolution reaction at the surface. and the product was affected by temperature. The intensity ratio of $Mg(OH)_2$ in the XRD analysis decreased with increasing applied potential. while that of MgO increased. The anti-corrosion properties of anodized specimens at each constant potential were better than those of non-anodized specimens. The specimen anodized at an applied potential of 3 V had the best anti-corrosion property. And the intensity ratio of $Mg_{17}Al_{12}$/Mg increased with aluminum content in Mg-Al alloys. During anodizing. the active dissolution reaction occurred preferentially in ${\beta}\;phase(Mg_{17}Al_{12})$ until about 4 mins. and then the current density increased radually until 7 mins. The dissolution reaction progressed in a phase(Mg) which not formed the intermetallic compound. which had a lower Al content. In the anodic polarization test of $0.017\;mol{\cdot}dm^-3$ NaCl and $0.1\;mol{\cdot}dm^-3\;Na_2SO_4$ at 298 K. the current density of Mg-15 mass% Al alloy anodized for 10 mins increased. since the anodic film that forms on the a phase is a non-compacted film. The anodic film on the phase for 30 mins was a compact film as compared with that for 10 mins.

• 대한원격탐사학회지
• /
• 제21권2호
• /
• pp.99-111
• /
• 2005

제주도의 지열 부존 가능지역을 추출하기 위하여 최근 활발하게 제안되고 있는 퍼지이론에 기반한 GIS 통합기법을 적용함으로써 그 효용성을 검토하였다. 지질도, 수계 분포 밀도, 분석구 분포 밀도, 선구조 분포 밀도, 항공자력도, 항공방사능도 등 각 주제도의 통계적 상관관계 분석을 위해 퍼지소속함수(Fuzzy membership function)를 그래프에 도시하였다. 현재 온천 발견 위치와 상관성은 용암류의 분출시기가 오래될수록 높았다. 수계, 분석구 및 선구조에서는 분포밀도가 낮은 곳에서 상관성이 높게 나타났으며, 항공자력도와 항공방사능도에서는 대자율 및 감마선 강도가 중간 범위인 곳에서 상관성이 높은 것으로 나타났다. 퍼지 연산자 중에서는 $\gamma$ 연산자($\gamma$=0.75)가 가장 높은 성공 비율을 보였으며, 제주도 서북부 일부지역에서 새로운 지열 부존 가능성이 제기되었다.

• 한국물환경학회지
• /
• 제38권2호
• /
• pp.63-71
• /
• 2022

This study aimed to maximize the potential of fluorescence 3D excitation-emission matrix (EEM) for predicting the trihalomethane formation potential (THMFP) of DOM with various sources. Fluorescence spectroscopy is a useful tool for characterizing dissolved organic matter (DOM). In this study, differential spectroscopy was applied to EEM for the prediction of THMFP, in which the difference between the EEM before and after chlorination was taken into account to obtain the differential EEM (DEEM). For characterization of the original EEM or the DEEM, the maximum intensities of several different fluorescence regions in EEM, fluorescence EEM regional integration (FRI), and humification index (HIX) were calculated and used for the surrogates for THMFP prediction. After chlorination, the fluorescence intensity decreased by 77% to 93%. In leaf-derived and effluent DOM, there was a significant decrease in the protein-like peak, while a more pronounced decrease was observed in the humic-like peak of river DOM. In general, leaf-derived and effluent DOM exhibited a relatively lower THMFP than the river DOM. Our results were consistent with the high correlations between humic-like fluorescence and THMFP previously reported. In this study, HIX (r= 0.815, p<0.001), FRI region V (r=0.727, p<0.001), humic-like peak (r= 0.827, p<0.001) from DEEM presented very high correlations with THMF P. When the humic-like peak intensity was converted to a logarithmic scale, a higher correlation was obtained (r= 0.928, p<0.001). This finding suggests that the humic-like peak in DEEM can serve as a universal predictor for THM formation of DOM with various origins.