• 대한조선학회논문집
• /
• 제45권1호
• /
• pp.54-62
• /
• 2008

A new solution method was developed to solve the free surface flow around a hull and named as 'Variable Free Surface Panel Method'. In the method the non-linearity of the free surface boundary conditions was fully taken into account and the raised panel method was employed to effectively solve the problem. The transom stern flow was also considered and the panel on the hull was generated using the panel cutting method. Numerical calculations were performed for KCS(KRISO Container Ship) hull form and compared with the experimental data to confirm the validity of the method. The comparison with the conventional free surface panel method was also accomplished. It is confirmed that new method gives more reliable results than the conventional method.

• 한국가시화정보학회지
• /
• 제7권2호
• /
• pp.28-34
• /
• 2010

Two turbulent jet with different sinusoidal nozzle exit configurations of in-phase and $180^{\circ}$ out-of-phase were investigated experimentally using a smoke-wire method and a hot-wire anemometry. Mean velocity and turbulence intensity were measured at several downstream locations under $Re_D\;=\;5000$. For the case of in-phase nozzle configuration, the length of potential core exhibits negligible difference with respect to the transverse locations (0, $\lambda/4$ and $\lambda/2$), similar to that of a plane jet. On the other hand, a maximum difference of 30% in the potential-core length occurs for the $180^{\circ}$ out-of-phase configuration. The spatial distributions of turbulence intensities also show significant difference for the nozzle of $180^{\circ}$ out-of-phase, whereas non-symmetric distribution is observed in the near-exit region(x/D = 1) for the in-phase sinusoidal nozzle jet. Compared to a slit planc jet, the sinusoidal nozzle jets seem to suppress the velocity deficit as the flow goes downstream. The sinusoidal nozzle jet was found to decrease turbulent intensity dramatically. The flow visualization results show that the flow characteristics of the sinusoidal nozzle jet are quite different from those of the slit plane jet.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.267-273
• /
• 2020

This Hydrokinetic energy system is the process of extracting energy from rivers, canals and others sources to generate small scale electrical energy for decentralized usage. This study investigates the application of Soil and Water Assessment Tool (SWAT) in Geographical Information System (GIS) environment to evaluate the theoretical hydrokinetic energy potentials of selected Rivers (Asa, Awun and Oyun) all in Asa watershed, Kwara state, Nigeria. SWAT was interfaced with an open source GIS system to predict the flow and other hydrological parameters of the sub-basins. The model was calibrated and validated using observed stream flow data. Calibrated flow results were used in conjunction with other parameters to compute the theoretical hydrokinetic energy potentials of the Rivers. Results showed a good correlation between the observed flow and the simulated flow, indicated by ash Sutcliffe Efficiency (NSE) and R² of 0.76 and 0.85, respectively for calibration period, and NSE and R² of 0.70 and 0.74, respectively for the validation period. Also, it was observed that highest potential of 154.82 MW was obtained along River Awun while the lowest potential of 41.63 MW was obtained along River Asa. The energy potentials obtained could be harnessed and deployed to the communities around the watershed for their energy needs.

• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.994-1002
• /
• 2012

Acoustic power transmission loss(TL) is an important performance of the muffler system. TL will be affected by the velocity of the fluid in duct since acoustic pressure varies according to the fluid velocity. In this paper, two kinds of fluid model, potential flow and turbulent flow, for the fluid flowing in simple expansion chamber are considered. The effects of their two fluid models in acoustic TL are investigated for the straight and L-shaped simple expansion chamber. In higher frequency range, the characteristics of TL of the two fluid models show different results. The variation of TL according to the fluid velocity is shown more distinctly when turbulence model is used. Turbulent flow model should be used to obtain better estimation of acoustic TL in higher frequency range.

• Corrosion Science and Technology
• /
• 제12권6호
• /
• pp.280-287
• /
• 2013

Flow accelerated corrosion(FAC) of the carbon steel piping in pressurized water reactors(PWRs) has been major issue in nuclear industry. Severe accident at Surry Unit 2 in 1986 initiated the worldwide interest in this area. Major parameters influencing FAC are material composition, microstructure, water chemistry, and hydrodynamics. Qualitative behaviors of FAC have been well understood but quantitative data about FAC have not been published for proprietary reason. In order to minimize the FAC in PWRs, the optimal method is to control water chemistry factors. Chemistry factors influencing FAC such as pH, corrosion potential, and hydrazine contents were reviewed in this paper. FAC rate decreased with pH up to 10 because magnetite solubility decreased with pH. Corrosion potential is generally controlled dissolved oxygen (DO) and hydrazine in secondary water. DO increased corrosion potential. FAC rate decreased with DO by stabilizing magnetite at low DO concentration or by formation of hematite at high DO concentration. Even though hydrazine is generally used to remove DO, hydrazine itself thermally decomposed to ammonia, nitrogen, and hydrogen raising pH. Hydrazine could react with iron and increased FAC rate. Effect of hydrazine on FAC is rather complex and should be careful in FAC analysis. FAC could be managed by adequate combination of pH, corrosion potential, and hydrazine.

• 동력기계공학회지
• /
• 제16권5호
• /
• pp.40-46
• /
• 2012

본 연구에서는 자유표면 유동문제를 효율적으로 계산하기 위한 방법으로서, 수치 파수조를 구현하여 잠수체에 의한 조파현상을 시간영역에서 다룰 수 있는 수치해법에 대하여 소개하였다. 그리고 이를 이용하여 수행된 연구내용들을 검토하고 양력물체의 경우를 포함하기 위하여 개선된 수학적 정식화 및 수치해법의 개요를 다루었다. 임의의 운동을 하는 양력물체에 의한 조파현상을 전산기로 구현하는 수치 파수조는 과중한 계산시간이 문제가 되는데, 이는 수치 Kutta 조건의 구현과 양력표면 후방의 wake 영역을 계산에서 고려해야 하기 때문이다. 따라서 한층 더 수치계산의 효율성이 중요하다고 판단되므로, 본 연구에서 소개된 3차원 고차 스펙트럴/경계요소법(High-Order Spectral/Boundary Element Method)은 자유표면 요소수를 N이라 할 때 그 계산량이 NlogN에 비례(N이 클 때는 거의 선형적으로 비례)하여 증가하므로 기존의 방법들 보다 매우 효율적인 수치해법이라 할 수 있다. 향후, 본 연구의 타당성 검증을 위한 수치코드의 개선과 여러 가지 수치계산결과 비교 등의 노력이 더 필요하다고 생각된다.

• 대한조선학회지
• /
• 제27권4호
• /
• pp.15-26
• /
• 1990

본 연구는 표면 양력관 이론을 이용하여 초월 공동이 발생한 2차원 날개의 유동해석을 위한 제반 경계 조건을 검증하고 공동 뒷부분의 모형을 비교 검토한다. 해석해가 존재하는 2차원 대칭 스트럿 주위의 초월 공동 현상을 수치적으로 해석하여 그 결과를 해석해와 비교함으로써 표면 양력판 이론에 의한 프로펠러 공동 문제 해석의 가능성을 입증하였다. 특히, 공동 뒷부분의 비 선형 닫힘 모형, 타원형 닫힘 모형, 그리고 선형 닫힘 조건을 서로 비교 분석함으로써 공동 문제 해결에서 가장 중요한 공동 닫힘 조건의 영향을 보였다.

• 한국항해항만학회지
• /
• 제32권7호
• /
• pp.521-527
• /
• 2008

The Istanbul Strait is one of the important waterways in the world. And its southern entrance has a highly congested local traffic. Till now there are several studies regarding how the Istanbul Strait is dangerous to navigate and how those dangers can be mitigated. But there is no study regarding local traffic which is posing great collision risk. In a certain traffic area, marine traffic safety assessment parameters are traffic volume, frequency of collision avoidance maneuver, traffic density, traffic flow and potential encounter, In this paper local traffic volume, traffic flow and potential encounter number of local traffic vessels and possibility of collision are investigated in order to find degree of danger at the southern entrance of the Istanbul Strait. Finally by utilizing those, risky areas are determined for southern entrance of the Istanbul Strait. Results have been compared to a previous study regarding risk analysis at congested areas of the Istanbul Strait (Aydogdu, 2006) and consistency of the results were presented.

• 물과 미래
• /
• 제27권2호
• /
• pp.121-128
• /
• 1994

단락부에서의 모형실험을 통하여 표면 유속의 감소경향, 낙하리영역의 길이, 잠재핵(potential core)의 길이 등을 고찰하여 단구 전면에 대한 흐름을 규명하였다. 흐름속에 부류사가 혼재되어 있는 경우, 부유사가 낙하리영역 중에 퇴적하게 되어 단구의 진행 속도에 영향을 주게되므로 이를 규명하기 위하여 단락부에 있어서 부류사의 유입에 대한 실험을 실시하고, 이에 대한 식을 유도하여 실험 결과로부터 이들 식의 유효성을 증명하였다. 또한 단락부의 낙하리영역에서 사이폰에 의하여 채취되는 부류사량에 대한 실험 결과,$q_{s0}$ 를 규정하는 파라메타에 관한 검토를 실시하여 부류사의 퇴적 특성을 설명하였다.

• 한국항해항만학회지
• /
• 제30권8호
• /
• pp.631-636
• /
• 2006

본 연구에서는 자유수면 위를 고속으로 항주하는 트랜섬 선미를 채택한 선박에 의하여 발생되는 선박주위 및 트랜섬 선미 끝단에서의 비선형 자유수면 경계조건식을 만족하는 자유 수면에서의 파형을 해석하는 수치해석 기법에 대하여 연구, 선체주위 유동해석프로그램을 개발하였다. 개발된 수치해석 프로그램의 타당성을 검증하기 위하여 고속선인 Athena선형, KCS(KRISO container ship)선형에 대하여 수치해석을 실시하였으며, 그 결과를 모형시험에 의하여 계측된 실험결과와 서로 비교하였다.