• Journal of the Korean Society of Safety
• /
• v.10 no.1
• /
• pp.41-49
• /
• 1995

A potable oil skimmer is in need to remove spilt oils before they spread, which is applicable to various situations of oil viscosity, spill location, current, tides, waves and wind. An air suction skimmer was selected to be developed because of its advantages such as simple structure, excellent transportability, and easy deployment. A prototype operating by a commercial vacuum cleaner was fabricated. Tests of the skimmer showed good performance : the maximum suction rate of water and suction head were 18㎥/h and 2.7m, respectively.

• Plant Journal
• /
• v.14 no.3
• /
• pp.4-15
• /
• 2018

• Environmental Engineering Research
• /
• v.11 no.2
• /
• pp.77-83
• /
• 2006

The hot spring water of the north Jeonla province such as Wanggung, Jookrim, Seokjung, and Hwasim, has fluoride concentration of 3.9 mg/L, 12.7 mg/L, 1.9 mg/L, and 6.3 mg/L, respectively. These figures fairly exceed the Korean and WHO standard for potable water, which is 1.5 mg/L. Therefore, in this study, research on elimination of fluoride in a hot spring water of Jookrim region, which has the highest level of fluoride concentration level in the north Jeonla province, was carried out. In analysis of Jookrim hot spring water according to the water quality standard for potable water, pH was very high at 9.25 and the concentration of fluoride was 10 times higher than the standard at 18.2 mg/L. Other measurements were within the standard or not detected. After injecting 10g of activated carbon for elimination of fluoride, the fluoride concentration was measured at 13.5 mg/L, and when 70mL or more of alum 10 g/L solution was injected, the concentration was measured at 2.8 mg/L, and injecting 3g of lime was measured at 9 mg/L. Alum showed the best elimination performance among all individual injections. Injection of 25 mL of activated carbon and 100 mL of alum solution together reduced the fluoride concentration down to 1.3 mg/L, which is under the potable standard. Injection of lime 1g and 75 mL of alum 10 g/L solution together reduced fluoride concentration to 4.1 mg/L. From the modifying HRT, by using ion exchange resin column, the pH was stabilized when HRT was Imin and showed range of $6.7{\sim}7.8$. The fluoride concentration reduced gradually as the HRT increased, and satisfied the potable standard when HRT passed 6 min, and after 30 min HRT, the concentration of fluoride was 0.05 mg/L: almost eliminated.

• Membrane and Water Treatment
• /
• v.1 no.3
• /
• pp.207-214
• /
• 2010

Approximately 80% of water used in urban areas reappears as municipal wastewater (MWW). Reclamation of MWW is an attractive proposition under the present scenario of water stressed cities in India. In this paper, we attempted to reclaim MWW using lab-scale hollow- fiber (HF) membrane modules for possible reuse in non-potable applications. Experiments were conducted to evaluate the efficiency of virgin HF ($M_1$) and modified HF ($M_2$) modules. The $M_2$ module consists of HF modified with a skin layer formed through interfacial polymerization of m-phenylenediamine with trimesoyl chloride (MPD-TMC). The molecular weight cut-off (MWCO) of $M_1$ was 44000 g/mol and that of $M_2$ 10000 -14000 g/mol on the basis of rejection of polyethylene glycol. The combination of $M_1$ and $M_2$ modules was able to reduce concentrations of most of the pollutants in sewage and improved the treated water quality to the acceptable limits for non potable reuse applications. It is found that about 98-99% of the initial flux is recovered by the backwashing process, which was approximately two times in a month when operated continuously.

• Korean Journal of Microbiology
• /
• v.38 no.4
• /
• pp.293-298
• /
• 2002

In order to investigate the ecological aspect of bacteria on groundwater, water samples were collected from various regions. Total of 318 strains were isolated from diluted nutrient broth (DNB) agar medium, and investigated their growth pattern on nutrient broth (NB) medium. As a result, all the isolated strains were divided into two groups, NB and DNB organisms. Growth of DNB organisms were suppressed in full strength NB medium but not in DNB medium, which were called oligotrophic bacteria in this study. Proportion of DNB organisms occurred in the frequency of 50-98% in potable groundwaters (CW, CJ, DPG, CJG1), however, it was 23,46% in polluted site (TJ, NPG1). One hundred and two strains were identified as oligotrophic bacteria and their phylogenetic characteristics were determined by using 16S rDNA sequencing. Based on the phylogenetic analysis, they were found to fall into three major phylogenetic groups: belonging to the Proteobacteria $\alpha$-(49 strains), $\beta$-(50 strains), $\gamma$ -(3 strains) subdivisions. The phylogenetic analysis suggested that microbial diversity of potable groundwater is more complex than that obtained in the past investigation.

• Journal of Environmental Health Sciences
• /
• v.19 no.1
• /
• pp.44-50
• /
• 1993

In order to investigate the hygienic conditions of potable water in farm area, we examined the hygienic bacteriological and chemical tests of the 159 waters in the farm areas of Kwangjugun, Namyangju-gun, Yangpyung-gun Paju-gun and Hwasung-gun.The results were as follows: 1. Of the 159 waters, the average numbers of standard plate count and coliform were 920 $\pm$ 250ml and 450 $\pm$ 380/100 ml, respectively. The average pH was 6.74 $\pm$ 0.08, KMnO$_4$ consumption 4.18 $\pm$ 0.23 mg/l, turbidity 0.74 $\pm$ 0.08 degree, NH$_3$-N 0.07 $\pm$ 0.02 mg/l, NO$_3$-N 7.76 $\pm$ 0.48 mg/l, total hardness 101.3 $\pm$ 4.7mg/l, chlorine 18.6 $\pm$ 1.3mg/l, sulfate 12.9 $\pm$ 1.0 mg/l, lead 0.036 $\pm$ 0.003 mg/l, manganese 0.017 $\pm$ 0.003 mg/l, zinc 0.064 $\pm$ 0.005 mg/l, and copper 0.010 $\pm$ 0.001 mg/l, respectively. 2. Of the 159 waters, 84 samples (52.8%) were over 100 per ml of SPC or detected coliform per 100 ml water and 63 samples (39.6%) exceed over physicochemical limited criteria for potable water. NO$_3$-N was the primary item among excess contents of potable water in farm areas. 3. The contents of total hardness, chlorine and NO$_3$-N in Hwasung-gun were higher than those in the other regions, but the numbers of SPC and coliform in Yangpyung-gun and Namyangjugun were higher than those in the other regions. 4. The correlationships among many items were highly significant (SPC, Coliform, KMnO$_4$ consumption NH$_4$-N, NO$_3$-N, KMnO$_4$, Total hardness, Chlorine, Sulfate).

• Journal of Preventive Medicine and Public Health
• /
• v.50 no.4
• /
• pp.274-277
• /
• 2017

Objectives: Legionnaires' disease (LD) is a severe type of pneumonia caused by inhalation of aerosols contaminated with Legionella. On September 22, 2016, a single case of LD was reported from a newly built apartment building in Gyeonggi province. This article describes an epidemiologic investigation of LD and identification of the possible source of infection. Methods: To identify the source of LD, we interviewed the patient's husband using a questionnaire based on the Legionella management guidelines from the Korea Centers for Disease Control and Prevention. Water samples from the site were collected and analyzed. An epidemiological investigation of the residents and visitors in the apartment building was conducted for 14 days before the index patient's symptoms first appeared to 14 days after the implementation of environmental control measures. Results: Legionella pneumophila serogroup 1 was isolated from the heated-water samples from the patient's residence and the basement of the apartment complex. Thirty-two suspected cases were reported from the apartment building during the surveillance period, yet all were confirmed negative based on urinary antigen tests. Conclusions: The likely source of infection was the building's potable water, particularly heated water. Further study of effective monitoring systems in heated potable water should be considered.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.164-174
• /
• 2018

Corrosion of copper alloys (copper, bronze and brass) in soil was evaluated at ambient temperature using various methods such as electrochemical impedance spectroscopy (EIS), polarization curves and Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Spectroscopy microanalysis measurements. Three equivalent circuits were separately used to interpret the obtained impedance spectra. The EIS measurements indicated that the polarization resistance of all electrodes increases with increasing the immersion time. SEM showed a presence of three layers of corrosion products with various composition and morphology covering each electrode. In addition, it was found that at 20% of moisture content the $R_p$ values and the current density of all electrodes in the studied soil give the following order: copper > bronze > brass. Good consistency between the data obtained from EIS and PP measurements was observed.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.196-204
• /
• 2005

The objective of this study is to evaluate the possibility to apply pre-ozone and membrane system for drinking water. This system is improved in fouling control by pre-ozone system. It is composed of ultrafiltration hollow fiber type membrane and ozone reactor. The result of this study is that the flux is increased about 10.7% and decreased in TMP by the pre-ozone. Also, backwashing pressure decreased about 18%. The optimum concentration of residual ozone is 0.3~0.5 ppm. During the period, the recovery ratio of this system was turned out to be 90% as the flowrate of effluent is $67.1m^3/day$. When the TMP and backwashing pressure was $0.85kg/cm^2$ and $1.10kg/cm^2$, this system was stable without sudden fouling. Finally, the quality of effluent is satisfied the guidelines for potable water quality such as turbidity, color, E.coli, Mn, Al, Fe and so on.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.61-62
• /
• 2017

In this study, we introduce some main functions and specifications of a recently commercialized potable compact high voltage generator. USB killer has been designed to test surge protection circuitry of electronic equipments using USB ports. USB killer transforms 5V DC power supplied by USB port into a sufficiently high voltage over 200V DC through oscillator, transformer, voltage multiplier, and rectifier. The power charged in a high-capacity condenser can be applied back into the electronic equipments as an electric shock to destroy them or test protection circuits. USB killer is a readily available item, and one can test a variety of electronic equipments. We introduce some test results known over the internet and those obtained from our tests.